skeeter Posted June 25, 2011 Report Share Posted June 25, 2011 Mr Matt.Cross posted a thread on installing the VTAC FFT ( http://308ar.com/forum/index.php/topic,328.0.html )Does anyone know where to find that barrel nut wrench used on the VTAC nut in the thread? Or at least have any info on one that will suffice. I have the PRI wrench but I'm not sure it is going to work. I know the AR15 VTAC FFTs use the standard armorers wrench but I'm just not sure about the LR308, as it seems everything about the lr308 is always one off.Great how to thread good info! I will need that information real soon, like Tuesday :) however I still need to locate a suitable wrench. Quote Link to comment Share on other sites More sharing options...
imschur Posted June 25, 2011 Report Share Posted June 25, 2011 maybe this page will be helpful http://308ar.com/tools.htm Quote Link to comment Share on other sites More sharing options...
skeeter Posted June 25, 2011 Author Report Share Posted June 25, 2011 Thanks, I actually have the pri wrench you have listed there, I guess my question is will it work on the JP VTAC barrel nut. After viewing Matts thread I noticed he was using something that seemd specific to the unit. And I am always looking for a reason to buy new tools ;) a guy can never have too many tools in the garage 8) Quote Link to comment Share on other sites More sharing options...
imschur Posted June 25, 2011 Report Share Posted June 25, 2011 and here Quote Link to comment Share on other sites More sharing options...
imschur Posted June 25, 2011 Report Share Posted June 25, 2011 I thought you were asking about the big ass DPMS wrench Quote Link to comment Share on other sites More sharing options...
imschur Posted June 25, 2011 Report Share Posted June 25, 2011 additionally AR-10 pin spacing is different than DPMS. The big ass double ended wrench has one end for AR-10 and the other for DPMS Quote Link to comment Share on other sites More sharing options...
skeeter Posted June 25, 2011 Author Report Share Posted June 25, 2011 I originally had plans on using the DPMS FFT, So I ordered the tools needed for that, but after seeing the various threads here displaying the JP VTAC I just had to go out and get one of the 15.5" variety. Now I am trying to figure out if there is a special wrench needed for the barrel nut on the VTAC or if what I have will work. If not I have an excuse to order more toys.... I mean tools. ;D Quote Link to comment Share on other sites More sharing options...
skeeter Posted June 25, 2011 Author Report Share Posted June 25, 2011 I'll post an abreviated build when I aquire all the parts. I'm almost there just need to get the BCG. Quote Link to comment Share on other sites More sharing options...
imschur Posted June 25, 2011 Report Share Posted June 25, 2011 I should actually know the answer to your question. Problem is I have done a few AR-15's and DPMS 308's with VTACs and my memory is messing with me on which wrench I used. Something is telling me the VTAC even though it's 308 it uses an AR-15 wrench Quote Link to comment Share on other sites More sharing options...
imschur Posted June 25, 2011 Report Share Posted June 25, 2011 If Matt or someone doesnt chime in Ill dig out my tools. I do know which wrench I used. Just dont know what it is. Quote Link to comment Share on other sites More sharing options...
survivalshop Posted June 25, 2011 Report Share Posted June 25, 2011 Instruction read " use standard armorers wrench to apply 50-80 foot-pounds of torque as necessary to alien the lock nut to gas tube channel. " . I think I used a YH wrench on mine & I made mine flush with the upper receiver ,no loc tight. Has to be fitted that way . I didn't like the gap . Quote Link to comment Share on other sites More sharing options...
skeeter Posted June 25, 2011 Author Report Share Posted June 25, 2011 Cool Thanks survivalshop, Guess I missed that post. I tend to miss things that are right in front of me, maybe its getting ready to hit that 40 mark :o thats messing with my attention span.I'm good to go then <thumbsup> Quote Link to comment Share on other sites More sharing options...
Matt.Cross Posted June 26, 2011 Report Share Posted June 26, 2011 I used the big-ass dpms wrench (BADW), one end is for the ar15 type, and the other for the sr25 type. Quote Link to comment Share on other sites More sharing options...
washguy Posted August 16, 2011 Report Share Posted August 16, 2011 I used the big-ass dpms wrench (BADW), one end is for the ar15 type, and the other for the sr25 type.Hi Guys So im getting ready for my new mega build this week and just remembered I had trouble with the big azz dpms not fitting tight enough on the troy extreme barrel nut and boogering the barrel nut up...yes i understand there are two different ends but neither one worked worth a crap on the troy trx 308dpms barrel nut part number strx-308-dobt-00 so I called em and ordered a another nut which I have settin on the bench...so now im tryin all my different ar wrenchs ....tech at troy told me the dpms was the one to use last month ,but nope it wasnt....so guess which wrench fits the 308 troy like a glove? Its just the old lil square three prong wrench for the m16a1 that I had still in cosmoline.....yippee gtg for Friday! <thumbsup>Wash Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.