H2O MAN Posted August 23, 2011 Report Posted August 23, 2011 5 shots of 168gr AMAX were fired at each target @ 100 yards from the same National Match M1A.The target on the left utilized the Rogue bullpup stock, the target on the right utilized a bedded McMillan stock.1" measured from outside edge to outside edge.Gunny Hamler SNCO IC USMC shooting team - retired.
H2O MAN Posted September 13, 2011 Report Posted September 13, 2011 Scoped with a Leupold Mark 4 1.5-5x20mm MR/T 168 gr 7.62mm M2 with illuminated SPR in tall wire EDM rings from SEI. The cat-tail is from LaRue Tactical.She still fits into the 29" BLACKHAWK discreet carry case with the optic installed 8)[img width=810 height=607]http://www.athenswater.com/images/H2OsRogue-3.JPG
H2O MAN Posted September 13, 2011 Report Posted September 13, 2011 I had a few minutes to spare today and zeroed in my scope.I'm not comfortable firing from a bench and that's probably why one round is pulled way off to the right.
98Z5V Posted September 13, 2011 Report Posted September 13, 2011 That thing is definitely a shooter! <thumbsup>
H2O MAN Posted September 18, 2011 Report Posted September 18, 2011 I have added a 3.5 MOA Insight mRDS on a GEN 2 Burkett JP/DOC OffSet Mount
H2O MAN Posted September 27, 2011 Report Posted September 27, 2011 [img width=810 height=835]http://www.athenswater.com/images/Rogue-Blue.jpg[img width=810 height=683]http://www.athenswater.com/images/Evan-Rogue.JPG[img width=810 height=564]http://www.athenswater.com/images/Peterson-Rogue.JPG[img width=810 height=535]http://www.athenswater.com/images/BullpupBreakfastClub-09.24.2011.jpg
edgecrusher Posted September 28, 2011 Report Posted September 28, 2011 i like the black one, nicely done!
H2O MAN Posted October 7, 2011 Report Posted October 7, 2011 i like the black one, nicely done!That's Dino's all black M1A SOCOM 16 ... it's shown here with my suppressor attached.http://www.youtube.com/watch?v=E_bZvcWwFfU.
H2O MAN Posted October 20, 2011 Report Posted October 20, 2011 The offset MRDS didn't work for me on the bullpup so I movedit over to my long range Crazy Horse M14 EBR-NMRI-SEI rifle.I am making a few changes to the bullpup, I'll post pictures and results soon.
98Z5V Posted October 21, 2011 Report Posted October 21, 2011 I've always been a fan of that chassis ^^^ <thumbsup>
edgecrusher Posted October 21, 2011 Report Posted October 21, 2011 i think i like that more than the other sage chassis <thumbsup>
H2O MAN Posted October 21, 2011 Report Posted October 21, 2011 I've always been a fan of that chassis ^^^ <thumbsup>SAGE got it right when the added the PRS2.The MK14 Mod 2 uses a modified buttstock with a PRS2.These are heavy barrel rifles built for the NAVY by CRANE.
H2O MAN Posted November 3, 2011 Report Posted November 3, 2011 Mounting optics on the 15.25 inches of top rail you get with the Rogue bullpup chassis has been a challenge for me. I found that the reticule needed to sit up high, higher than I'm used to... finding the eye relief sweet spot was also a challenge. I tried several different combinations and the one pictured below seems to meet/exceed my wants and needs.Magpul MBUS - Gen II, LaRue Tactical LT608, Aimpoint CompC-2X 2MOA, EOTech FTS 3X magnifier - Gen II.* The MBUS required some work with a file to fit... this was an easy modification.I am able to co-witness the MBUS through the Aimpoint and I will eventually have an Aimpoint Comp M4s for my bullpup.
H2O MAN Posted January 16, 2012 Report Posted January 16, 2012 The SRSS BullDog 762 Gen 4 stock is now available and it will be at SHOT-12Photo courtesy: Different
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now