Matt.Cross

I don't know for certain, but research seems to indicate that Les likes to machine his own, I'm assuming if they explode in popularity though he will have to cease handbuilding them and create a more productive process. I'm just going by what I read in different reviews and the LB website though, so again I'm not certain. I'd like to know who does their castings though, it'd be sweet to machine your own monolithic AR!

That rifle-length FFT is mad sexy man, if you can fit a lo-pro gas block under there, you should keep it! Looks good bro!

Bump. Come on guys, you know you need to do another build....

No problem. It wouldn't hurt if there was a lot of interest expressed in their products either, I'm sure it wouldn't hurt their feelings to know there's lots of people who would like to provide them with plenty of business, at a reasonable price of course.

I'm going to call up LBC and find out!!! I'm pretty sure it will be in the 3K range. @imschur Yeah, lately I've been content to just sit back and watch the action, in this case I though it would be nice to share my dream.

A picture is worth 10,000 words in this case.

My wife will not let me near you guys once my tax return comes back... Just so ya know. <laughs>

Hey guys, I have a complete DPMS LR308 lower that was going to become a custom build, but I've decided that I want to base my custom build on the matched MA-TEN receiver instead, so this is up for sale. The serial number has a 'K' appended meaning it is a kit lower and was not matched with an upper when DPMS shipped it out. It has a Jard trigger group and MIAD grip, standard A2 stock. It's a very nice lower, but I want it to be someone else's when my tax refund comes back. I can add pictures or send them to anyone who's interested. I do not have a price set, but all you guys know what's fair, so make me an offer.

Saw this video and was reminded of the danger you guys face down on a daily basis. Be careful out there guys, stories like this are becoming uncomfortably common. Last but not least, thanks for looking out for the rest of us. Be safe in 2011.

Send one of those PM's my way, wouldja? Thanks!

Well, quite frankly I'm a greenhorn as far as any training is concerned, I need to get my head wrapped around where to start.

I'm thinking I want to sell my current DPMS project lower and go for a Ma-Ten build....

I'd like to be a candidate for a Ma-Ten... Count me in.

I have been fortunate enough to get on with the local State Employee's Credit Union, and it's a godsend, I was very fortunate to get on with them before my Dad retired as a US Postal employee. They were instrumental in helping me establish good credit with loan interest rates that are far better than any bank, they're also more understanding about delayed payments than any bank every dreamed of being. I have only ever had one problem with fraud and they overnighted my new card to me and accredited ALL my contested transactions back to my account the same day. Long story short, if you can get on somehow with a local credit union, go for it.

Welcome to the forums! Everyone here is nice and noone plays the know-it-all role, and that's why we all love it here. Sit back and relax, and enjoy becoming a mindless AR-product consumer with the rest of us.

This is a difficult question because there are plenty of variables, but here's the take from a negative-IQ perspective: I think of the adjustment as an absolute restriction, basically a check valve that is only going to permit X amount of energy transfer. Whether I have determined this setting using a high-pressure round, or a low-pressure round, given either round only X energy will pass through, with any excess being passed elsewhere along the path of least resistance. If you find this theory to be figurative swiss cheese, feel free to point out any/all flaws. <thumbsup> Evidence trumps theory, so lay the experience on me.

All I can say is "WOW!"... You've made wind calls make more sense in this one post than I've been able to make out of browsing all the 'pro' sites put together. I acknowledge that you aren't setting it in stone, but man it's great to even be roughly in the ballpark here. Thanks!

I suppose I don't think as much about whether or not rounds are chambered as I do about ACCESS. In other words, be able to control access to my loaded weapon. I don't want to have to both unlock my weapon and load it before I can bring it to bear, one of the reasons my carry is a 1911, using it is a matter of holding it and thumb sweeping a lever. Keeping the number of actions required to prepare the arm for use to a minimum is really my goal when it comes a defense-use weapon. I think this way because I don't give myself the benefit of the doubt that I'm faster than a bad guy when he interrupts my sleep @ 2am, and I'd hate for my last words to be "Oh crap!". Just my 2 cents worth fellas... :)

No problem brother, I couldn't have asked for a better explanation, and couldn't have gotten a better answer. Getting a zero is no problem, DOPE will be a matter of getting onto a range with better than 100 yds maximum shooting distance, which will not be a problem now that Dave has given me some 411. I'm trying to settle on a good match round until I can get a reloading setup together, and your round sounds as close to ideal as I've seen yet. Just trying to wrap my head around logistics & possibilities. Thanks for filling me in! <thumbsup>

John, I try to shoot as frequently as possible. Is your pricing fixed to 500 rounds + shipping? How much I can buy might vary from time to time, not to mention it could be cheaper to just come pick it up rather than ship it. In any event it's a great deal, and I'm researching what performs best in my rifle, so this sounds like a must-try.

1st on the list, congratulations and looking forward to it. 2nd, I'll be your guinea pig, you wanna teach somebody their way around the tactical semi-auto... I'll do it free of charge!!! :D

Welcome to the site, Branson has been forwarding your event info to me, sounds good and I hope to get out your way soon.

That's a sick paint job, how do I get one?

Well.... Looks like my marriage and bank account are about to take a simultaneous hit... <dontknow>

Hey man, welcome to the boards! Always nice to have another enabler on our side... I'm from very near Hickory, don't know how far out you are from there but if you know of any place I can step out past the 100yd mark, I'm all ears brother. Post up some pics, I enjoy eyeballing a man's hardware* if ya know what I mean. <laughs> <lmao> *Unless otherwise clarified, hardware and firearms/knives/other tacticool stuff are used interchangeably.