shepp Posted July 29, 2016 Report Share Posted July 29, 2016 21 minutes ago, Rsquared said: Hey Shepp! C'mon now brother......everybody around here knows that I'm the Armalite fanboy. Or at least, I would think that five of them would put me solidly in the camp. Oh forsure. Just tired of the ford vs Chevy, glock vs everybody debates but what do I know I own a junk ass dpms Quote Link to comment Share on other sites More sharing options...
EngrBob Posted July 29, 2016 Report Share Posted July 29, 2016 Hell Shepp, none of mine have a brand anymore. While the three large frames are DPMS compatible receivers, nothing matches. The Grendel and the 5.56s likewise are on multiple, unmatched uppers and lowers. No matches but everything works! Quote Link to comment Share on other sites More sharing options...
Quentin Posted July 30, 2016 Report Share Posted July 30, 2016 (edited) You're the man, EngrBob! Not much to building a best of breed AR-15 using various parts you prefer but I know you can get into real trouble fast mixing parts in a 308 AR. No doubt lots of guys here can do the same. Shepp, I'm sure your DPMS is a great rifle. And I like mine. Variety is the spice of life, as they say! And when it comes to guns I think we all want a large variety! Edited July 30, 2016 by Quentin Quote Link to comment Share on other sites More sharing options...
392heminut Posted August 5, 2016 Report Share Posted August 5, 2016 (edited) Personally, I enjoyed the history lesson and learned a couple of things even though I already knew most of the stuff Quentin posted. Once the OP's question was answered I figure no harm, no foul. We've derailed a lot of threads in a lot worse ways on this board. Edited August 5, 2016 by 392heminut Quote Link to comment Share on other sites More sharing options...
bubbas4570 Posted August 5, 2016 Report Share Posted August 5, 2016 11 hours ago, 392heminut said: Personally, I enjoyed the history lesson and learned a couple of things even though I already knew most of the stuff Quentin posted. Once the OP's question was answered I figure no harm, no foul. We've derailed a lot of threads in a lot worse ways on this board. I am with you on this, I learned way more that any foul committed. Derailment happens all the time.... Quote Link to comment Share on other sites More sharing options...
lx2008 Posted August 5, 2016 Author Report Share Posted August 5, 2016 since this thread still has some traffic...i`ll ask another question, ASC mags for my dpms 308. how are these? i`ve been looking for a 5 round mag to use @ bench. dpms only has 4 round. since i always fire 5rds per test load when reloading, i dont want to use a 4 rounder. ASC seems to be the only one who makes 5 rounders. mag limiters won`t work in case your wondering why i don`t use them...the length of the mag while in a bench rest does not cut it. Quote Link to comment Share on other sites More sharing options...
shepp Posted August 5, 2016 Report Share Posted August 5, 2016 56 minutes ago, lx2008 said: since this thread still has some traffic...i`ll ask another question, ASC mags for my dpms 308. how are these? i`ve been looking for a 5 round mag to use @ bench. dpms only has 4 round. since i always fire 5rds per test load when reloading, i dont want to use a 4 rounder. ASC seems to be the only one who makes 5 rounders. mag limiters won`t work in case your wondering why i don`t use them...the length of the mag while in a bench rest does not cut it. Idk anything about asc but I thought magpul made a 5? Maybe it's a ten? But still the ten only protrudes out an inch or two, I could messure for you this weekend Quote Link to comment Share on other sites More sharing options...
lx2008 Posted August 5, 2016 Author Report Share Posted August 5, 2016 thanks, but no need to measure. but with my set up, it must be close to flush. i know this because my other ar10`s are the same way with how i shoot off the rest i have. Quote Link to comment Share on other sites More sharing options...
lx2008 Posted August 5, 2016 Author Report Share Posted August 5, 2016 edit...i have already ordered one of these. $16 i believe. i`ll only be using at bench so if it functions fairly well i`ll be happy. no intentions on using for any other purpose. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.