Brian_Paul_D Posted April 6, 2017 Author Report Share Posted April 6, 2017 I'm thinking that removing the gas block and tube and putting on a separate gas block upside down might be the best option. Having never taken one off, I was worried that I wouldn't be able to get the original system back on correctly but watching a few videos it does seem fairly simple. Anyway, just thinking at this point. Quote Link to comment Share on other sites More sharing options...
98Z5V Posted April 6, 2017 Report Share Posted April 6, 2017 (edited) When you mount it upside down, do not put the rear screw in the gas block. Just use the front screw (if it's a two screw setup). The rear screw hole is ALWAYS drilled directly opposite the gas port, and if you put that screw in, you'll undoubtedly damage the gas port in the barrel. You WILL have gas escaping. You could loc-tite a set screw in place, without cranking it down the barrel's gas port, but that gas is hot, that loc-tite will break down, and that set screw will eventually fly outta there like a rocket one of the times you fire. Use a clamp-on gas block, and you won't be tempted. You will still have gas escaping. Just thought about this - if you use a clamp-on, and mount it 90*, instead of directly upside down, you'll be able to seal the barrel's gas port that way. Edited April 6, 2017 by 98Z5V Quote Link to comment Share on other sites More sharing options...
392heminut Posted April 6, 2017 Report Share Posted April 6, 2017 Or just put a gas block on backwards and upright! Quote Link to comment Share on other sites More sharing options...
98Z5V Posted April 6, 2017 Report Share Posted April 6, 2017 ^^^ Best idea yet! Quote Link to comment Share on other sites More sharing options...
Robocop1051 Posted April 6, 2017 Report Share Posted April 6, 2017 1 hour ago, 392heminut said: Or just put a gas block on backwards and upright! This is my thought too. Simple and cosmetically appealing. Quote Link to comment Share on other sites More sharing options...
Magwa Posted April 6, 2017 Report Share Posted April 6, 2017 On 4/1/2017 at 11:05 AM, ARTrooper said: Move to a better state where they don't restrict your gun rights. ;) DING DING DING winner...I know I am not being realistic but I would be on the phone ,internet, to the papers where ever I could go to point out the idiocy of this law, there have been semi autos in the world of hunting for a hundred years, most states that do have a concern about the amount of ammo used simply require a 5 round mag period! if after exhausting the above and not getting any positive action taken on their part I would tell them and the state to go Fuk themselves and I would move to stay and put up with idiots who think like that is just helping their cause.... all MY OPINION..... so grain of salt etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.