awesymoto Posted July 27, 2011 Report Share Posted July 27, 2011 Quick Q.Will the Giesselle SSA-E trigger (small pin) "drop in" fit without issue with the DPMS LRT lower? I read around you may have to file the bottom of the trigger for it to fit, is this true?Thanks Awesymoto Quote Link to comment Share on other sites More sharing options...
edgecrusher Posted July 27, 2011 Report Share Posted July 27, 2011 i had to file for it to fit into my pws, but it wasn't difficult and was well worth the end result. i went a little at a time, being very careful not to file the retaining pin they call a j pin. i used a sanding drum and a dremel. Quote Link to comment Share on other sites More sharing options...
survivalshop Posted July 27, 2011 Report Share Posted July 27, 2011 Quick Q.Will the Giesselle SSA-E trigger (small pin) "drop in" fit without issue with the DPMS LRT lower? I read around you may have to file the bottom of the trigger for it to fit, is this true?Thanks AwesymotoTrigger fitment may be needed because of the wide variety of manufacturers of AR 308 lowers, but its not the norm . Mine fit with out any mods. & most will . Quote Link to comment Share on other sites More sharing options...
Timing Posted July 28, 2011 Report Share Posted July 28, 2011 I was able to fit both of the ssa-e that I own in my dpms lower without any issues. Quote Link to comment Share on other sites More sharing options...
washguy Posted August 20, 2011 Report Share Posted August 20, 2011 I was able to fit both of the ssa-e that I own in my dpms lower without any issues.Hiya Just put one in a mega.....no problemo Wash Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.