iitiimothyii Posted January 8, 2020 Report Share Posted January 8, 2020 So this is my first build and I am just starting it but I'm trying to install my belt catch but the lower receiver already has a silver pin in place that I do not know how to remove to put my parts in any help Quote Link to comment Share on other sites More sharing options...
iitiimothyii Posted January 8, 2020 Author Report Share Posted January 8, 2020 I just figured it out it's a screw but what size and bit Quote Link to comment Share on other sites More sharing options...
sketch Posted January 8, 2020 Report Share Posted January 8, 2020 typically it would ba an allen wrench (size small) Quote Link to comment Share on other sites More sharing options...
shooterrex Posted January 8, 2020 Report Share Posted January 8, 2020 Probably an Allen head. Just get you Allen keys out till you find the right one. Quote Link to comment Share on other sites More sharing options...
iitiimothyii Posted January 8, 2020 Author Report Share Posted January 8, 2020 1.5 mil Quote Link to comment Share on other sites More sharing options...
iitiimothyii Posted January 8, 2020 Author Report Share Posted January 8, 2020 My selector switch is a little sloppy is there any way to make it less sloppy or did I use the wrong spring Quote Link to comment Share on other sites More sharing options...
iitiimothyii Posted January 8, 2020 Author Report Share Posted January 8, 2020 I used the bigger detent pin and it is very crisp Quote Link to comment Share on other sites More sharing options...
sketch Posted January 9, 2020 Report Share Posted January 9, 2020 need more info.. what brand lower, who's parts kit did you use? pictures help alot 👍 Quote Link to comment Share on other sites More sharing options...
98Z5V Posted January 9, 2020 Report Share Posted January 9, 2020 5 hours ago, iitiimothyii said: My selector switch is a little sloppy is there any way to make it less sloppy or did I use the wrong spring 4 hours ago, iitiimothyii said: I used the bigger detent pin and it is very crisp There's only one selector spring,if that's what you're talking about - so you didn't have the right one in there. The Selector Detent pins are all the same size/length, no matter if it's AR15 or Large Frame AR - unless we're talking about Chinese parts here. You need to provide more information on your parts - brand names, what vendor purchased from - before you get solid information. There's just no way to provide you with solid information without that data. I hope you understand that. Without good information, we're just wasting our time, trying to figure out (guessing) what you're doing ... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.