billymagg Posted December 9, 2020 Author Report Share Posted December 9, 2020 21 hours ago, billymagg said: Yes Sir, its our cousin and he has an outside wood box away from the house, he's been running wood for years, and I'm thankful for all that crap we get off the farm, kinda like thistles... It's beautiful wood, I'd love to have a custom take down recurve laminated with wood from the farm, its is really pretty, and the trees they cut yesterday were very clean and straight... I concur on the locust, it does burn hot, and the secret is to let it cure and get as much sap as possible out of it, you can also mix it slower burning hardwoods. I have run a woodstove as my only heat in Central Mo when I was in college and pastoring a small church, course we always had a fireplace, and burnt wood at home. My Mom and Dad were thrilled when they bought a fireplace insert, and we had a ducted collector and fan's on each side, so it put out a lot of heat.. Its important to have a tight firebox that you can actually damp down, I love a nice wood fire, my brother in law cuts a LOT of wood and sells it... My Heavy H1 and H2 buffers came in today, and I put the H2 in the "Dirty Little Thirty", I ordered some 10 round Lancers, some FDE inserts for the handguard, a short rail section for a bi-pod, and a little more ammo. I can't wait to shoot it, but I'm meeting Swiftab tomorrow, so a nice little drive for each of us and I'm really looking forward to meeting him and setting up a proper reloading bench in the basement... I'm gonna have to tear out my old bench, take down my Father in Laws old pegboard, and pull the paneling off to make sure I have enough support, I'm afraid I need to put a few more two by fours in behind that paneling, all fun, I can't wait! There was one can of CFE 300 Black left, so I attempted to buy it, come to find out it was an empty display.... Thank you Swiftab, that is a gorgeous reloading bench, even Mrs. Billy commented how nice it was, now if I can just get Swifty to come up here and help me with the install! I'm gonna have to get in to that wall and give it some muscle in order to get that gorgeous bench up to speed! Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 9, 2020 Author Report Share Posted December 9, 2020 22 hours ago, billymagg said: Yes Sir, its our cousin and he has an outside wood box away from the house, he's been running wood for years, and I'm thankful for all that crap we get off the farm, kinda like thistles... It's beautiful wood, I'd love to have a custom take down recurve laminated with wood from the farm, its is really pretty, and the trees they cut yesterday were very clean and straight... I concur on the locust, it does burn hot, and the secret is to let it cure and get as much sap as possible out of it, you can also mix it slower burning hardwoods. I have run a woodstove as my only heat in Central Mo when I was in college and pastoring a small church, course we always had a fireplace, and burnt wood at home. My Mom and Dad were thrilled when they bought a fireplace insert, and we had a ducted collector and fan's on each side, so it put out a lot of heat.. Its important to have a tight firebox that you can actually damp down, I love a nice wood fire, my brother in law cuts a LOT of wood and sells it... My Heavy H1 and H2 buffers came in today, and I put the H2 in the "Dirty Little Thirty", I ordered some 10 round Lancers, some FDE inserts for the handguard, a short rail section for a bi-pod, and a little more ammo. I can't wait to shoot it, but I'm meeting Swiftab tomorrow, so a nice little drive for each of us and I'm really looking forward to meeting him and setting up a proper reloading bench in the basement... I'm gonna have to tear out my old bench, take down my Father in Laws old pegboard, and pull the paneling off to make sure I have enough support, I'm afraid I need to put a few more two by fours in behind that paneling, all fun, I can't wait! There was one can of CFE 300 Black left, so I attempted to buy it, come to find out it was an empty display.... So hopefully I can get the "Dirty Little Thirty" out for a successful test run tomorrow, I'm gonna start with the H2, which is currently my heaviest buffer, wish me luck, I did actually get a little more 300 Ham'r ordered thankfully, Since I ordered the first time, most of it is no GONE! All the more reason to get that loading bench set up, and get our Rock Chucker on there, I better get those dies ordered PDQ! Quote Link to comment Share on other sites More sharing options...
98Z5V Posted December 9, 2020 Report Share Posted December 9, 2020 3 hours ago, billymagg said: I'm gonna start with the H2, which is currently my heaviest buffer, wish me luck, I think you'll need a real H3 buffer, at 5.4oz. Just my $0.02 on the whole affair. Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 10, 2020 Author Report Share Posted December 10, 2020 (edited) 21 hours ago, 98Z5V said: I think you'll need a real H3 buffer, at 5.4oz. Just my $0.02 on the whole affair. I started with the H2 buffer today, and the 125 gr Hornady FMJ's. Most ejected, but a few failed to lock back on the empty magazines with the H2. When I exchanged the H1 for the H2, the bolt started locking back on the empty mags, but still didn't pick up a single second round off the top of the magazine. I then switched to the 110 gr Hornady SP's which did lock back on an empty mag, and also picked up and chambered the 2nd round twice.. with the second magazine which contained 3 rounds, the first two went boom, and the third round "locked up" the trigger. It appears the third round chambered, but did not allow the bolt to enter battery, (hence the hung up trigger)... when I attempted to operate the charging handle, it too was "locked up"? I pulled the rifle off the bag, and began to get more serious with it, it did indeed pop an empty out of the action, but I had 3 empties, and only two booms?? I proceeded to load a third magazine with two rounds, I had not inserted that magazine, when this all dawned on me. I picked up the third empty, looking for a firing pin strike and saw none, what I did see was a new primer, examining the chamber revealed a bunch of unspent powder in the chamber, and peering into the breech revealed a real pretty 110 gr. Hornady SP... so I took some WD and blew out the chamber and upper receiver of unspent powder, and put the "Dirty Little Thirty" back in the case. I shot "Little Miss Wilson", next who functioned fine, other than dribbling the empties out of the chamber? (yeah, I need to open up the gas block a little) but I'm not doing anything until I get the "Dirty Little Thirty" running... Sorry for the book: I called Wilson Combat and and Lamar initially offered to send me another barrel and allow me to return mine when I received theirs? I told him fine, but then the supervisor nixed that solution and wants me to send my barrel to them, and then they will send me a barrel,,, maybe, they only had one left and its not fluted... I told Lamar I thought maybe the ammo had a weak crimp, and he suggested that it was almost fully chambered, and that I pulled the bullet when I muscled the charging handle back, he has been very supportive and apologetic, but he's right, they do have very tight chambers, and I think its highly likely I did indeed "pull the bullet"! the bullet wasn't really stuck, and light tap on the cleaning rod popped it right out, a forward assist would have likely put me in business, but I'm all billet, all the time, LOL... So, I popped out the bolt and popped her in the gun vise and gave here a good cleaning, I cleaned it with a wet patch, then gave it a very good brushing, then I pulled the bolt apart and cleaned and lubed that up good. I've fired almost 30 rounds, and I had not cleaned the bolt, and there was quite a bit of carbon build up, I had to scrub it with a brass brush and solvent to get it cleaned up... Honestly it is a very tight chamber, the whole rifle is tight, so I'm going to be patient and keep breaking it in.. that little deal today is a good reminder to "clear you bore", especially with a new magazine fed weapon... I can always swap barrels, but I really, really don't want to do that, I like this rifle, it groups very well for all the goings on, and I think it will slick up here shortly... I also made sure to let them know how disappointed I am, relating the safety channel being only half bored out, so Lamar was very apologetic, and said their CNC machines are running nearly 24/7 and they are in a hole and trying to dig out, he thanked me for my patience and sent me a return sheet... so here we are, I still love this dang thang, it will work! 98 you're warnings about this half breed 300 were well spoken, that pile of 300 Ham'r ammo is damn near gone, but I have enough to get me through this break in period... they rest of you can pray for me, I need it on a number of levels, lol! Edited December 10, 2020 by billymagg Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 10, 2020 Author Report Share Posted December 10, 2020 21 hours ago, 98Z5V said: I think you'll need a real H3 buffer, at 5.4oz. Just my $0.02 on the whole affair. So to recap 98 3/32/0.94" gas port, standard Wilson 7" carbine receiver extension, standard Wilson buffer spring, Brownells H1 buffer, Wilson Combat BCG, drop in trigger, and 18" Tactical Hunter with intermediate gas tube.. I tried the H2, and I may try it again. The Magpul 300 Black 30 rounders are crap, I'm waiting on some 10 round Lancers for the 300 Black.. My ugly little steel ASC 5.56 mag seems to be trying to work, the aluminum ASC's are as pathetic as the Magpul.. Now my big AR in 308 loves those Magpul, ASC steel five round mags, and the Lancer 20s, so, its just a matter of getting the "Dirtly Little Thirty" to fly in a closer formation! Quote Link to comment Share on other sites More sharing options...
shooterrex Posted December 10, 2020 Report Share Posted December 10, 2020 I would chamber a round and see if it pulled the bullet again. If so a set of headspace gauge's are in your future. Quote Link to comment Share on other sites More sharing options...
98Z5V Posted December 10, 2020 Report Share Posted December 10, 2020 3 hours ago, billymagg said: So to recap 98 You need a buffer that weighs 5.4 oz - and that's an H3 buffer. That will solve your problems, if you stick with the spring that I was mentioning, when I made that comment. For real. Try me out and prove that I'm guessing this one wrong. Quote Link to comment Share on other sites More sharing options...
jtallen83 Posted December 10, 2020 Report Share Posted December 10, 2020 9 hours ago, billymagg said: Honestly it is a very tight chamber, That was my experience with the 338 fed. barrel of theirs. I ended up polishing the chamber with a mop and some jewelers rouge. Went a little at a time, polish test fire, polish test fire....... maybe 4 rounds of that, it seems to have helped but it could be the rounds fired while testing helped break it in. Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 10, 2020 Author Report Share Posted December 10, 2020 8 hours ago, shooterrex said: I would chamber a round and see if it pulled the bullet again. If so a set of headspace gauge's are in your future. Its good and clean now, I had a dozen rounds through it, I think it hung up going into battery, in fact I took my thumb and attempted to push it into battery when the trigger "locked up"... It wouldn't budge. So I attempted to operated the charging handle and it was def hung up, so a couple of good pulls and out she came... No bullet visible on that case, and I'm thinking, only two bangs, three cases?? picked it up and sure enough, no primer strike, then I look into the chamber from the side and see some "gunk", so I sprayed that out with WD-40, (no I don't use that to lube, but I did use Rem oil, I think that could be part of the problem, its watery and goes away), then popped my upper off knowing what I was gonna find. I didn't have a rod or anything to clear the bullet, so I sacked it up and shot the "Miss Wilson", who is just a sweety, and fired a couple of groups with her, (as noted, the brass just dribbles out of that girl, I need to open up that gas block, but not until the "Dirty Little Thirty") is fully operational. I'm NOT impressed with Magpul's 300 "Blackout" mags, but they are 30 rounders, my 5 round ASC aluminum mags are also unimpressive, my one and only 5 round steel ASC, is my one happy mag, I've got 3 10 round Lancer's coming from you know who.. Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 10, 2020 Author Report Share Posted December 10, 2020 9 hours ago, 98Z5V said: You need a buffer that weighs 5.4 oz - and that's an H3 buffer. That will solve your problems, if you stick with the spring that I was mentioning, when I made that comment. For real. Try me out and prove that I'm guessing this one wrong. I don't doubt you 98, I know the first damn thing you would have likely done is drill that gas port and forced that heavy buffer spring into submission! (No, I'm not gonna do that yet, I hate like hell though, to pull this barrel and send it back to "Wilson Combat"... Lamar was gonna ship me another 300 Ham'r, but the supervisor put an end to a good man's plan. "Wilson Combat, is out to take care of Wilson Combat", you can quote me on that, they have the nicest and most knowledgeable staff on the planet, but, in the end, Lamar came back and said, you will have to send your barrel back and then we will send you another barrel, (which is NOT fluted), that's what it says on our web site!! Wilson is NOT making any fluted barrels these days, they are running CNC wide open and can't keep up with the regular stuff... Anyway, I'm gonna work on getting this thing "broke in"! FYI Wilson Combat is NOW producing 18" non fluted Tactical Hunter 300 HAM'R barrels with a "mid-length" gas tube, and has shortened the 40 coil buffer spring to 37 coils. I think we can safely deduce that they realize they were "undergassed" and "over assed"! Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 10, 2020 Author Report Share Posted December 10, 2020 9 hours ago, 98Z5V said: You need a buffer that weighs 5.4 oz - and that's an H3 buffer. That will solve your problems, if you stick with the spring that I was mentioning, when I made that comment. For real. Try me out and prove that I'm guessing this one wrong. If you want to send me an H3 buffer to try, I will do that, and if it works I will buy it from you, if not I'll send it back. What spring my friend?? refresh my memory?? I'm so damn far into this money and time wise there's no turning back. It didn't want to cycle with the H2 buffer, and it does seem to wanting to cycle with the H1... I tried the heavy buffer first! I'm running Wilson's standard buffer spring that comes in their kit. This ALL reminds me of why I'm a 98 Mauser guy! Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 10, 2020 Author Report Share Posted December 10, 2020 3 hours ago, jtallen83 said: That was my experience with the 338 fed. barrel of theirs. I ended up polishing the chamber with a mop and some jewelers rouge. Went a little at a time, polish test fire, polish test fire....... maybe 4 rounds of that, it seems to have helped but it could be the rounds fired while testing helped break it in. I spent a good bit of time with my chamber brush and a really good copper solvent when I got back home yesterday afternoon. I'm convinced that it is a very tight chamber, (this dang thing wants to shoot), I have been shooting 5 rounds and cleaning, I prolly had 12-15 rounds yesterday, it was trying to cycle and that was very encouraging... I may try bore cleaning paste on a mop?? but I'm just going to shoot it and clean it for now.. Wilson did have their Hornady 125 gr FMJ back in stock yesterday, maybe I'll try to pick up another couple of boxes of that. Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 10, 2020 Author Report Share Posted December 10, 2020 10 hours ago, shooterrex said: I would chamber a round and see if it pulled the bullet again. If so a set of headspace gauge's are in your future. Yes Sir, we will check that out first thing this morning at the range... Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 10, 2020 Author Report Share Posted December 10, 2020 17 hours ago, shooterrex said: I would chamber a round and see if it pulled the bullet again. If so a set of headspace gauge's are in your future. Shooter, when I got to the range this morning and loaded my ammo in that little steel ASC mag, I filled it up, (5 rnd), what I noticed is that whole stack of ammo was pointing off to the left about 5 to 10 degrees, I pushed it up and down several times. So I loaded the aluminum 5 rnd ASC's samo, samo! all of them pointing off to the left... so I unloaded those as well. So I got out one of those 300 Black Magpul 30 rounders and loaded 6 rounds of the Hornady 110's in it, all square and business like, it picked up and fired all 6 rounds, a first, and locked back on the empty mag,,, success. Then I switched back to the Hornady 125's, I think it fired two, and then I removed it and reseated the the first of 4 rounds and it fired all four, but did not lock back on the empty mag.. So I loaded the other Magpul 300 black mag and it cycled the first two, and fired two more and jammed, removed the mag and it picked up the last two, and locked back on the empty mag. Quote Link to comment Share on other sites More sharing options...
98Z5V Posted December 11, 2020 Report Share Posted December 11, 2020 (edited) 12 hours ago, billymagg said: I What spring my friend?? refresh my memory?? If I had a spare H3, I'd ship it - meaning if I had 2 of them. I have one sitting here that's my "primary spare." If I had 2, you'd be in, because 2 is 1 and 1 is None... That's why I keep 1 handy, in the mobile range toolchest. Try the H3 with that standard Wilson spring first. Check function. For shiits and giggles, depending on how that turns out, try that flat-wire monster with the H3 after that, just to see what happens. You have a 0.094" gas port in a barrel running a cartridge that's got enough power already. Based on earlier descriptions, not picking up the second round with that standard spring - that BCG is moving too fast, and you need more buffer Ass To Control The Mass - slow that BCG down with weight... Edited December 11, 2020 by 98Z5V Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 11, 2020 Author Report Share Posted December 11, 2020 (edited) 1 hour ago, 98Z5V said: If I had a spare H3, I'd ship it - meaning if I had 2 of them. I have one sitting here that's my "primary spare." If I had 2, you'd be in, because 2 is 1 and 1 is None... That's why I keep 1 handy, in the mobile range toolchest. Try the H3 with that standard Wilson spring first. Check function. For shiits and giggles, depending on how that turns out, try that flat-wire monster with the H3 after that, just to see what happens. You have a 0.094" gas port in a barrel running a cartridge that's got enough power already. Based on earlier descriptions, not picking up the second round with that standard spring - that BCG is moving too fast, and you need more buffer Ass To Control The Mass - slow that BCG down with weight... Roger that, I know you would, this chick needs to be shot, a lot! 6 consecutive rounds of 110 SP Hornady at 2650 fps, (per Wilson specs out of an 18" barrel), no sweat with H1... I did have some failures when I went back to the 125 FMJ's at 2450 fps, 16 rounds and then home due to having an appt with #1 son to go to lawyer,, yeah, we've been there, the big D. anyway, scrubbed the "Dirty Little Thirty" with my chamber brush and bore brush, and yes, it was a little cruddy, BCG still nice and lubed up, light wipe and more lube.. When I got home Wilson Combat 135 gr Speer, 3 FDE trim rail covers, armorers kit for trim rail, and 3 brand spanking new Lancer 300 Magazines.... Tonight, Wilson has the 110's and 125's back in stock,,,, I promise I will re-install the H2 as this thing gets broken in, just for grins and giggles, and if somebody has an H3 send it to me, I would love to see how that functions, and I would love to use that damn 40 coil spring... I hate buying "kool chit" that don't work, but now Wilson has switched that back to 37 coils... You know I really do try to follow your lead my friend, and I've been reading practically every damn thing you've ever written about gas ports, buffers, buffer springs and receiver extensions... and spending a LOT of time in the 300 Black thread, lots of good info there on the 300 Ham'r... and yeah, I'm starting to figure out why I'm the only person on 308AR.com with a Ham'r.. but dammit, I love this thing! I know you don't recall, but when I joined, I wanted a slik barrel with NO threads, (yeah I've got thread protectors on them both), and a rifle length buffer assembly... (I can't help it, I like that stupid carbon fiber rifle length stock that Wilson sell for way to damn much money) I also made it clear that I wanted 30 cal holes in the target that I could see.... But, little "Miss Wilson" had that carbine caboose and the folding stock, that dang thing is handy!, it will go in the same short bag as the "Dirty Little Thirty", that has made carry my rifle around the farm in/on a vehicle so much easier... I think a need a scabbard for my tractor and gater, lol.. anyway, I owe this whole little adventure to you guys, especially you big Daddy, and I LOVED your blonde "butt bagg" in your long range at the OK corral thread, you know being broke and all, and having all this beautiful Krap coming in those lovely Wilson Combat, Brownell's, and even Optics Planet boxes... those magazines should change this up in my favor, we'll see, and I'm praying on top of all that, Merry Christmas Dudes! Edited December 11, 2020 by billymagg Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 11, 2020 Author Report Share Posted December 11, 2020 Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 11, 2020 Author Report Share Posted December 11, 2020 Break it in! Quote Link to comment Share on other sites More sharing options...
98Z5V Posted December 11, 2020 Report Share Posted December 11, 2020 (edited) 15 minutes ago, billymagg said: and I LOVED your blonde "butt bagg" in your long range at the OK corral thread, 115 lbs of weight on your back will make you miss shots. She was joking, and said she'd jump on me. Told her "Go for it, it won't make a difference..." She jumped down and spread out like a Spider Monkey, too... Had a 205 lb Army buddy that used to sit directly in the middle of my back, when trying to make longer shots, "Just for training..." he says... He was a dickhead for doing that, but it makes you focus, whilst being fucked with. Edited December 11, 2020 by 98Z5V Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 11, 2020 Author Report Share Posted December 11, 2020 17 hours ago, 98Z5V said: 115 lbs of weight on your back will make you miss shots. She was joking, and said she'd jump on me. Told her "Go for it, it won't make a difference..." She jumped down and spread out like a Spider Monkey, too... Had a 205 lb Army buddy that used to sit directly in the middle of my back, when trying to make longer shots, "Just for training..." he says... He was a dickhead for doing that, but it makes you focus, whilst being fucked with. yeah, damn, I felt so sorry for you, lol... H2's back in that "Dirty Little Thirty", she's happy with Hornady 110's and Speer 135's, but she don't like those Hornady 125 FMJ's, and I thought those would cycle like hot butter.... Those Lancer's are amazing, when I first saw those stupid looking metal feed lips bonded to a poly mag, I thought that was the dumbest dang thing I had ever heard! Quote Link to comment Share on other sites More sharing options...
98Z5V Posted December 12, 2020 Report Share Posted December 12, 2020 (edited) 4 hours ago, billymagg said: Those Lancer's are amazing, when I first saw those stupid looking metal feed lips bonded to a poly mag, I thought that was the dumbest dang thing I had ever heard! Lancer mags are amazing. That's all I'd have, if I was buying new. I have a substantial stockpile of other mags that work, and won't be getting rid of them, though. Not with Obiden-Harris right around the corner... I might take them all on a boating trip before the inauguration. Feel bad for them, some haven't been out in awhile, and need a vacation weekend getaway thing. Edited December 12, 2020 by 98Z5V Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 12, 2020 Author Report Share Posted December 12, 2020 8 minutes ago, 98Z5V said: Lancer mags are amazing. That's all I'd have, if I was buying new. I have a substantial stockpile of other mags that work, and won't be getting rid of them, though. Not with Obiden-Harris right around the corner... I might take them all on a boating trip before the inauguration. Feel bad for them, some haven't been out in awhile, and need a vacation weekend getaway thing. Yes Sir, I'm sold, good cleaning, great lube, and just getting broken in, it sounds completely different when I cycle it manually. Thats what Jason from Wilson Combat recommended, said his HAM'R runs great! Oh, yeah Obiden-Scarrus!! she is a scary chick, Joe already called Don and asked him to pardon him and Jim, and Hunter, said he'd give him 50% of his 10%... Don's thinkin about it?? lol Gosh we are going to miss the Trumpster, them dumb sumbee's outsmarted us again with the help of the swamp creatures from HELL! Question??? how long will it take the dim's to get rid of Biden?? will they take him out right after the inauguration? or maybe early summer, lol... Quote Link to comment Share on other sites More sharing options...
98Z5V Posted December 12, 2020 Report Share Posted December 12, 2020 12 minutes ago, billymagg said: Question??? how long will it take the dim's to get rid of Biden?? will they take him out right after the inauguration? or maybe early summer, lol... Well... You remember when Pelosi was mouthing off about the 25th Amendment, about removing a sitting President, when he's no longer FIT?! Remember the shiit-storm that caused? Hold on... she wasn't talking about trying to remove TRUMP, near the end of his term. She was dusting that topic off, bringing it to memory for people - so they can take out Pedo, Hair-Sniffing, Hugging Joe, early in his term. Hell, they only have to show him garbling a few sentences, making a few gaffes (like he always does), and they can push the 25th against him and remove him. UNFIT, Mentally Not There... Then, it's PRESIDENT Kamala, and VICE PREZ (quess who - the current Speaker of the House) Pelosi... Yeah, that's real. I'm open for research and suggestions, in case I don't understand the US Constitution the way I read it. Bring comments, brothers. Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 12, 2020 Author Report Share Posted December 12, 2020 2 minutes ago, 98Z5V said: Well... You remember when Pelosi was mouthing off about the 25th Amendment, about removing a sitting President, when he's no longer FIT?! Remember the shiit-storm that caused? Hold on... she wasn't talking about trying to remove TRUMP, near the end of his term. She was dusting that topic off, bringing it to memory for people - so they can take out Pedo, Hair-Sniffing, Hugging Joe, early in his term. Hell, they only have to show him garbling a few sentences, making a few gaffes (like he always does), and they can push the 25th against him and remove him. UNFIT, Mentally Not There... Then, it's PRESIDENT Kamala, and VICE PREZ (quess who - the current Speaker of the House) Pelosi... Yeah, that's real. I'm open for research and suggestions, in case I don't understand the US Constitution the way I read it. Bring comments, brothers. My point exactly, the swamp Monster returns all NUKED up, HELL, you know Nancy Pelosi has to have transfusions of "zombie blood", hairdressor my ass, she was going in for her two week nuclear infused botox! thats why she doesn't need a mask, she's not really breathing, just running on nuclear botox... hell, for all we know she has to visit area 51 every two weeks??? But back to business, the dims don't like Biden, he embarrasses the hell out of em, but Kamala is the real player, how far left can you stretch your??? she can go you one better, lol! Quote Link to comment Share on other sites More sharing options...
billymagg Posted December 16, 2020 Author Report Share Posted December 16, 2020 On 12/11/2020 at 5:10 PM, billymagg said: yeah, damn, I felt so sorry for you, lol... H2's back in that "Dirty Little Thirty", she's happy with Hornady 110's and Speer 135's, but she don't like those Hornady 125 FMJ's, and I thought those would cycle like hot butter.... Those Lancer's are amazing, when I first saw those stupid looking metal feed lips bonded to a poly mag, I thought that was the dumbest dang thing I had ever heard! Okay, the "Dirty Little Thirty" is still all clean and sitting in the safe, Mollie, Arlie, and Jacob flew in from Arizon, Saturday evening, and are getting married in a real church this coming Saturday afternoon, and I had to go back to work Monday after school being closed for two weeks to hopefully head off the "Thanksgiving Covid SPIKE! anyway, on the Texas Hunting Forum, there is a 300 Ham'r thread, 50 pages of it, Bill Wilson very actively participating, sharing bullets and loads, hunts, and actively helping those with functioning issues and entertaining serious requests for good information.. I signed up, but so far, I'm just reading the Hammer thread, lots of good information there. I'm going to try to get back out and get that Hornady 125 FMJ functioning shortly, stand bye, wedding shortly... LOL, then I will be broke! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.