AR45 and AR10MM barrel

[Albroswift]

Hello, all

Looking for a 7"-8" 45ACP AR barrel and a near carbine length 10mm blowback AR barrel

[Thirstydg323]

Towards the bottom for 45acp 

https://www.kakindustry.com/ar-15-parts/barrels

 

 

 

[Albroswift]

Yep. On their waiting list. Also, want 5/8 threads, want to bore out a 308 cookie cutter for the 45. Really irritate the guy shooting in the next lane. ...

Stern has one in stock but .578x28.

[Thirstydg323]

I'm sure you already know, but for the people that do drive-by post.

Those same folks have some mighty fine tunable pistol buffers.

https://www.kakindustry.com/ar15-buffer-system

[98Z5V]

13 hours ago, Thirstydg323 said:

I'm sure you already know, but for the people that do drive-by post.

Those same folks have some mighty fine tunable pistol buffers.

https://www.kakindustry.com/ar15-buffer-system

Most pistol-caliber specific buffers are longer than 3.250" long.  That link won't be good for most people that are building pistol-caliber ARs, because the 3.250" buffer isn't long enough to run in a pistol-caliber AR.

You know, for those that are doing drive-by posting...  

[Albroswift]

10 hours ago, 98Z5V said:

Most pistol-caliber specific buffers are longer than 3.250" long.  That link won't be good for most people that are building pistol-caliber ARs, because the 3.250" buffer isn't long enough to run in a pistol-caliber AR.

You know, for those that are doing drive-by posting...  

Need 4 tungsten weights and 4 to 4-1/4" in length if you want 10 oz. Found one more supplier in the $50 range that fits the bill but forgot who now. I'll run across them again and post in the buffers thread. To buy tungsten weights it's almost $10.00 ea after shipping so if you can get a 4 weight buffer for $50  yur golden.

I'm going to run my special 5 weight in the 10mm, but that project is in the "receiver only in  a box on the shelf"  phase right now.

Brother is working on the 45, got upper, lower, LPK, BCG looking for a 7"-8" barrel with 5/8x24 threads. DTT has one in stock with the 578x28 for cheap, holding off for now.

[Albroswift]

Ok, got a 5" 45 barrel coming, and a 308 cookie cutter. This is going to be the most annoying gun at the range! Have to work up some slow burning high everything else 45 loads!

[jtallen83]

On 6/5/2021 at 10:16 AM, Albroswift said:

Found one more supplier in the $50 range that fits the bill but forgot who now. I'll run across them again and post in the buffers thread.

$3.95 each BUT the catch being you need a $500 minimum order. 

https://www.tungstensupershot.online/Tungsten_Alloy_Buffer_Weights_for_AR15/p5470590_18422995.aspx

These guys are at the price level you mentioned, bought from them myself and was happy. 

https://pur-tungsten.com/product/tungsten-recoil-buffer-weights/