Nja112189 Posted December 17, 2021 Report Share Posted December 17, 2021 So my Gibbz G10 upper came in earlier this week. At like $300 plus fees should I get the matched lower? I have a G4 with a poverty pony lower and it works great. I understand that the larger platform is more picky... Thanks Quote Link to comment Share on other sites More sharing options...
jtallen83 Posted December 17, 2021 Report Share Posted December 17, 2021 5 minutes ago, Nja112189 said: should I get the matched lower? Most certainly, always a great idea to get upper and lower from the same maker. Quote Link to comment Share on other sites More sharing options...
98Z5V Posted December 17, 2021 Report Share Posted December 17, 2021 (edited) 33 minutes ago, Nja112189 said: So my Gibbz G10 upper came in earlier this week. At like $300 plus fees should I get the matched lower? I have a G4 with a poverty pony lower and it works great. I understand that the larger platform is more picky... Thanks Is that the side-charger? Search "Gibbz" here, because we've seen 3 Gibbz side-chargers, and they all had issues... I'm just sayin'... Edited December 17, 2021 by 98Z5V Quote Link to comment Share on other sites More sharing options...
jtallen83 Posted December 17, 2021 Report Share Posted December 17, 2021 7 minutes ago, 98Z5V said: 3 Gibbz side-chargers At least he won't have to hear about the lower being the problem as he winds his way through their customer service. Quote Link to comment Share on other sites More sharing options...
98Z5V Posted December 17, 2021 Report Share Posted December 17, 2021 (edited) 2 minutes ago, jtallen83 said: At least he won't have to hear about the lower being the problem as he winds his way through their customer service. This guy is #4, so let's see how this one goes. Going with their lower is about the only option here... based on previous reports here... With their lower, if it's gas port shiit or gas tube, recoil system junk - we can fix that. If it's still just a fucked up design, there's nothing we, here, can do about that. With their lower, we can get it to the operational point where it SHOULD work, and he can point that back at the company, on the design. Edited December 17, 2021 by 98Z5V Quote Link to comment Share on other sites More sharing options...
Nja112189 Posted December 17, 2021 Author Report Share Posted December 17, 2021 Appreciate the feedback. I did see others have issues. There is a good gunsmith in town that has an indoor range. They also are well known for their bolt gun builds. I was planning on them cerakote it. Maybe I will have them put it together... I rather not or maybe they can atleast check the specs. Quote Link to comment Share on other sites More sharing options...
Nja112189 Posted December 17, 2021 Author Report Share Posted December 17, 2021 I am confident that they could get it running at a worst case. Quote Link to comment Share on other sites More sharing options...
jtallen83 Posted December 17, 2021 Report Share Posted December 17, 2021 52 minutes ago, Nja112189 said: I am confident that they could get it running at a worst case. There is enough information here on Gibbz for a pretty good head start, hope you'll be adding to that data base with a running gun. Quote Link to comment Share on other sites More sharing options...
DNP Posted December 17, 2021 Report Share Posted December 17, 2021 As stated, match the lower. Put a proper recoil system, make sure you have a barrel with a proper sized gas port (plenty on that here in other threads) and make sure you have a gas tube that winds up in the proper location…you’ll have very few reasons it can’t run. Quote Link to comment Share on other sites More sharing options...
98Z5V Posted December 18, 2021 Report Share Posted December 18, 2021 12 hours ago, Nja112189 said: Appreciate the feedback. I did see others have issues. There is a good gunsmith in town that has an indoor range. They also are well known for their bolt gun builds. I was planning on them cerakote it. Maybe I will have them put it together... I rather not or maybe they can atleast check the specs. 12 hours ago, Nja112189 said: I am confident that they could get it running at a worst case. There's alot of no-kidding Gunsmiths that have their own shops, that don't know shiit about Large Frame ARs, and all the differences. Not joking you on that. Don't put your money in that basket, just because they can build bolt guns. Were not talking the differences between Apples and Oranges, when comparing bolt guns to Large Frame ARs. We're talking about the difference between Apples and Hammers. See what they know - ask them if they know the operational differences between DPMS LR-308 based guns, compared to what's different in the Armalite AR-10 based guns. If they look at you like a dog looking at an airplane - don't have them build your gun. They don't know enough. No matter how many bolt guns they build. Quote Link to comment Share on other sites More sharing options...
Nja112189 Posted December 18, 2021 Author Report Share Posted December 18, 2021 Thanks for feedback. I am going to be building this gun over the next like 10 months so I won't have feedback for a long time. Quote Link to comment Share on other sites More sharing options...
unforgiven Posted December 19, 2021 Report Share Posted December 19, 2021 Matched upper/lower avoid race gun parts. Simple is good. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.