Rifle length gas tube source

[enragged]

Just recently got my PSA-10 and have read a lot on them here, so purchased the KAW Valley Precision stock hardware kit with the stiffer spring and 5.6 oz buffer since the Armalite kit has been out of stock for some time.  I am currently trying to find a rifle length gas tube since of course they are still shipping with the gas tubes too short.  I am hoping someone has purchased one from somewhere other than Armalite since those are back ordered as well.  Any help would be appreciated!

[shooterrex]

https://dsgarms.com/upper-receiver-parts-arm10007010

[enragged]

Awesome! thanks!

 

[Cruzie27]

https://www.eurooptic.com/Armalite-AR-10-6-POS-Receiver-EXT-Kit.aspx
 

Works perfect with the stock that comes on the g3 PA-10. 

[enragged]

On 9/28/2022 at 5:46 PM, Cruzie27 said:

https://www.eurooptic.com/Armalite-AR-10-6-POS-Receiver-EXT-Kit.aspx
 

Works perfect with the stock that comes on the g3 PA-10. 

Thanks.  I am going to try the KVP set I bought first, but will deff. keep this in mind if I do run into issues. Had I found this before though...

[Censored_germ]

I know that I am a little late to the party, but here are some different lengths of gas tubes. 

 

https://truenortharms.com/ar15_default_store_view/gas-tubes-for-ar-15-ar-10-stainless-1.html

rifle length 15.675"

https://andersonmanufacturing.com/am-10-gas-tube-rifle-length.html

rifle length 15.5"

https://rockfiresportsinc.com/product/ar-15-ar-10-rifle-length-gas-tube-15-25-stainless-steel/

rifle length 15.25" but also says its for an AR-15 also so I'm not sure that it would properly clear the barrel nut

[Armed Eye Doc]

2 hours ago, Censored_germ said:

I know that I am a little late to the party, but here are some different lengths of gas tubes. 

 

https://truenortharms.com/ar15_default_store_view/gas-tubes-for-ar-15-ar-10-stainless-1.html

rifle length 15.675"

https://andersonmanufacturing.com/am-10-gas-tube-rifle-length.html

rifle length 15.5"

https://rockfiresportsinc.com/product/ar-15-ar-10-rifle-length-gas-tube-15-25-stainless-steel/

rifle length 15.25" but also says its for an AR-15 also so I'm not sure that it would properly clear the barrel nut

Thanks for the info @Censored_germ.

Welcome to the forum.  Hit up the introduction page and tell us a little about yourself.  

https://forum.308ar.com/forum/22-introductions/

[98Z5V]

7 hours ago, Censored_germ said:

https://truenortharms.com/ar15_default_store_view/gas-tubes-for-ar-15-ar-10-stainless-1.html

rifle length 15.675"

This is not a rifle length gas tube that I've ever seen used before.  Ever.  By any barrel manufacturer.

Ever. 

[Cunuckgaucho]

12 minutes ago, 98Z5V said:

This is not a rifle length gas tube that I've ever seen used before.  Ever.  By any barrel manufacturer.

Ever. 

Might be a typo on his part, TNA doesn't list a 15.675" but the do list a 15-3/8" which = 15.375"

Here are the numbers provided by TNA

Distance to gas block shoulder        Gas tube size

9 7/8"                                                  11.75" (AR-15 Midlength)

13 1/4"                                                 15.125" (AR-15 Rifle)

10 1/8"                                                 12 1/2" (AR-10 Midlength)

13 1/2"                                                 15 3/8" (AR-10 Rifle)

[98Z5V]

2 hours ago, Cunuckgaucho said:

Might be a typo on his part, TNA doesn't list a 15.675" but the do list a 15-3/8" which = 15.375"

0.300" is a pretty giant mistake, for a gas tube length.  That's a third of an inch, and no small mistake by any means.  Nobody has ever used a rifle length gas tube, on that measurement.

For someone showing up here and "setting a record straight" - setting us all straight on gas tube lengths -that's a major fuk-up.   And, it's a reason for me to question anything that @Censored_germ ever states for fact in the future. 

But, that's just my $0.02 on it.  Whatever that's worth. 

[Censored_germ]

I am sorry for that! I did F that up and you are right. its 15 3/8'

https://truenortharms.com/ar15_default_store_view/gas-tubes-for-ar-15-ar-10-stainless-1.html

15 3/8" rifle length

 

[Censored_germ]

I wasn't in any way trying to set people straight, I was just trying to help people with finding a gas tube to help them with what they may need. I apologize for the bad info on that length and I will double check before posting any specs again.

[98Z5V]

20 hours ago, Censored_germ said:

I was just trying to help people with finding a gas tube to help them with what they may need.

Best thing to do is start in the Intro Section, and tell us about yourself...   It's right here:

https://forum.308ar.com/forum/22-introductions/