Gregory Paul Posted March 11, 2023 Report Posted March 11, 2023 After around 200 rounds starting noticing spent casings had a u shaped dent where the bullet sits. Now, the bolt carry catches too far so you basically can’t load a magazine with out pulling on the Charging handle all the way back. See pictures. Any ideas?
sketch Posted March 11, 2023 Report Posted March 11, 2023 Hey there G P please refrain from spamming the site with the same ? First off, your new hit the intro section and give us some details about you. We encourage everyone to do this, so we can better understand what you know and experience is always obliged. Second have you removed any obstruction or debris in the receiver? Possibly a blown primer... Welcome to the site.
shooterrex Posted March 12, 2023 Report Posted March 12, 2023 Your bolt isn't locked back on the bolt catch
98Z5V Posted March 13, 2023 Report Posted March 13, 2023 On 3/11/2023 at 6:05 PM, shooterrex said: Your bolt isn't locked back on the bolt catch Yep, probably a 3.250" buffer in a 7.000" extension. Or the AR15 rifle buffer in the rifle extension. Whatever is being run here for a recoil system. Numbers are mandatory.
arm_usa Posted March 17, 2023 Report Posted March 17, 2023 11.5” upper meaning barrel? Not a 12.5”? As mentioned we need more info.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now