Scope mount info needed

[BLKSHEEP]

I would like some suggestions for scope mounts, my set up is a lwrc/repr (20") with a weaver 3-15x50mm scope/BC flip caps. I've read that the Larue's are very good, what other brands/models  should be on the short list? what height will I need to clear the rear iron sight & front rail? (staying as low as possible) for future sake would I need the 20moa cant to reach the 1k mark? the scope has 28 mrad's of total adjustment. I leaning towards a QD.

http://swfa.com/Weaver-3-15x50-Tactical-30mm-Rifle-Scope-P49448.aspx Thanks for the input <thumbsup>

[edgecrusher]

the boys here have had good luck with the bobro mounts,

http://www.bobroengineering.com/browse/category/scopemounts/

and i personally have a larue mount on my larue obr

http://www.laruetactical.com/larue-tactical-spr-m4-scope-mount-qd-lt-104

it also came with one because the rifle has the cant built into the rail

http://www.laruetactical.com/larue-tactical-obr-qd-scope-mount

here is one with the cant

http://www.laruetactical.com/larue-tactical-20-moa-psr-scope-mount-qd

hope it helps

[BLKSHEEP]

the boys here have had good luck with the bobro mounts,

http://www.bobroengineering.com/browse/category/scopemounts/

and i personally have a larue mount on my larue obr

http://www.laruetactical.com/larue-tactical-spr-m4-scope-mount-qd-lt-104

it also came with one because the rifle has the cant built into the rail

http://www.laruetactical.com/larue-tactical-obr-qd-scope-mount

here is one with the cant

http://www.laruetactical.com/larue-tactical-20-moa-psr-scope-mount-qd

hope it helps

Thanks for the info, how would I know if I need the standard or extended? (Bobro)

[Timing]

Don't forget to also look at ADM for your mount. Every bit as good as or better than the other. I personally like their version of the throw levers the best.

[BLKSHEEP]

Don't forget to also look at ADM for your mount. Every bit as good as or better than the other. I personally like their version of the throw levers the best.

  Thanks, I ordered the ADM RECON 20moa, $85 less than LaRue <thumbsup> https://www.primaryarms.com/American_Defense_ADRECON_30MM_20_MOA_Moun_p/ad-recon-30-20moa.htm

[Timing]

Good choice, I'm sure you won't be disappointed.

[NYresq]

And the ADM wont chewmup your rails if you take it off and on with any frequency. The Larue cam has a tendancy to wear away at the rail as it rides under and locks up. The ADM only squeezes between the side plates. After seeing the damage done to a rail with a couple different larue accessory mounts, I sold them and swapped them all to ADM QR mounts.

[outkastsl]

  Thanks, I ordered the ADM RECON 20moa, $85 less than LaRue <thumbsup> https://www.primaryarms.com/American_Defense_ADRECON_30MM_20_MOA_Moun_p/ad-recon-30-20moa.htm

That's where I ordered mine.  That mount is solid and the throw levers work great with the lock and is easily adjustable to ensure that your zero stays put (for the most part). 

[BoKnows]

Here's my 20moa ADM Recon with Nightforce NXS F1 3.5-15x50 MLR2.0

[unforgiven]

Welcome from Indiana brother Bo,and you be's knowing like the rifle love the scope and mount. 8)