tucson308 Posted March 3, 2013 Report Share Posted March 3, 2013 Hi All! If you have been following the other posts about the new bolts then you will know I said they are being tested and will be ready for sale very soon. That day is here and the testing went great with no issues the entire time of testing. I have 4 bolts ready to sell and 10 more within 10 days. The bolts are stripped and sell for $155 priority shipping included. PM me if interested. I will point you towards the completion parts if you like. Tucson308. Quote Link to comment Share on other sites More sharing options...
tucson308 Posted March 3, 2013 Author Report Share Posted March 3, 2013 Here are some pics. Quote Link to comment Share on other sites More sharing options...
Rsquared Posted March 4, 2013 Report Share Posted March 4, 2013 Looks like some nice machining there my brother. Quote Link to comment Share on other sites More sharing options...
tucson308 Posted March 4, 2013 Author Report Share Posted March 4, 2013 Thank you! I should have mentioned I can lead you to carriers (park and Chrome) as well as the completion parts all from one source. Quote Link to comment Share on other sites More sharing options...
unforgiven Posted March 4, 2013 Report Share Posted March 4, 2013 Very nice brother <thumbsup> Quote Link to comment Share on other sites More sharing options...
planeflyer21 Posted March 7, 2013 Report Share Posted March 7, 2013 Just met tucson308 and picked mine up. Great looking bolt!All I need now is the rest of the upper assembly and to complete that Dane lower.Almost done!Jon Quote Link to comment Share on other sites More sharing options...
Tripledeuce Posted March 13, 2013 Report Share Posted March 13, 2013 I'v sent you three PM's saying I wanted the RR bolt we talked about. My phone 970-385-4116. Thanks Terry Quote Link to comment Share on other sites More sharing options...
unforgiven Posted March 13, 2013 Report Share Posted March 13, 2013 Quote Link to comment Share on other sites More sharing options...
sil9mm Posted March 23, 2013 Report Share Posted March 23, 2013 any more bolts available? Quote Link to comment Share on other sites More sharing options...
Tripledeuce Posted March 23, 2013 Report Share Posted March 23, 2013 I'v gotten my bolt. I'm waiting for the info on where to get the rest of the bolt parts. Terry Quote Link to comment Share on other sites More sharing options...
sil9mm Posted March 23, 2013 Report Share Posted March 23, 2013 pm sent Quote Link to comment Share on other sites More sharing options...
Tripledeuce Posted March 23, 2013 Report Share Posted March 23, 2013 I can definatly say that I like this bolt so much, I will be buying another!!!! I can also say that the DPMS bolt WILL fit the RRA! but, the dpms bolt is @.005 thou shorter than the RR, so I'm going to have to shorted the Firing pin @.005. Not a big deal, but it MIGHT, not will, just miht, cause primer punctures if not taken care of. Geoff was a little heavy handed polishing off the burs on the locking lugs, but not anywhare close to a problem. I really like what he's done to help us all out! Respectfully Terry Quote Link to comment Share on other sites More sharing options...
tucson308 Posted March 25, 2013 Author Report Share Posted March 25, 2013 Hi Terry, Thank you for the positive feed back! I would not shorten that firing pin just yet. I've used several as is and have had no issues with "primer puncture" all of the bolts are inspected and that particular dimension is the same as the JP bolts. "Heavy Handed" is the intention when it comes to polishing the radii on the locking lugs. I've seen on several bolts both AR-15 and LAR-10 where the lugs start to gall up on the barrel extension. It is one thing to gall the bolt lugs, but to gall the barrel extension, could mean replacing a barrel. The first bolts I made had smaller radii on them and showed signs of very slight signs of galling or small horizontal lines. These generation two bolts show no signs of side wall wear at all while maintaining the most lug engagement on the market. I just put my 2500th round through my gen 2 bolt this weekend and I can say despite a couple of shinny areas from engaging the lugs, or the bolt carrier the bolt is like new. Good luck and let me know if you EVER have ANY issues. Geoff. Quote Link to comment Share on other sites More sharing options...
edgecrusher Posted March 26, 2013 Report Share Posted March 26, 2013 Good luck and let me know if you EVER have ANY issues. Geoff. There it is ^^^^ . If I build a large platform, you will hear from me! Excellent job Geoff Quote Link to comment Share on other sites More sharing options...
unforgiven Posted March 26, 2013 Report Share Posted March 26, 2013 <thumbsup> Let us know how she flies brother Terry. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.