bubbasks Posted January 1, 2014 Report Posted January 1, 2014 Well went out for a little testing today. First time testing out 44 spl in my SBH and man i must say it was a pleasure to shoot. But the fun was with the 308. Tested 2.820 and 2.830. First up was .830 and it shot eh. Bout the same as .800. Let the rifle cool back down for half hr and went on to .820. First target really shows what happens as the barrel warmed up. And a 10 round after warm resulted in this. I do think ive found my load.
Dane Armory Posted January 1, 2014 Report Posted January 1, 2014 Bubba what mag are you using that let's you load the ammo that long. My limit is. 2.816". Very cool one hole groups.
bubbasks Posted January 1, 2014 Author Report Posted January 1, 2014 Single feeding. The .820 fits fine. Any bigger it rubs bad. Factory dpms 10rd steel
Dane Armory Posted January 1, 2014 Report Posted January 1, 2014 Ron , that's how you measure a mags inside length !! Down to the thousandth.
98Z5V Posted January 2, 2014 Report Posted January 2, 2014 Ron can't measure a mag properly, apparently... <lmao>
planeflyer21 Posted January 2, 2014 Report Posted January 2, 2014 Ron can't measure a mag properly, apparently... <lmao> He got that from his choice in rifles. <laughs> :909:
Dane Armory Posted January 2, 2014 Report Posted January 2, 2014 What i miss?338 LM mag measurement on a different thread. ... Me being a smart a$$ !
mineralman55 Posted January 2, 2014 Report Posted January 2, 2014 What powder is "H4835"? Is this some new, super secret formulation? Let us in on it! Or as most of us here did you score a 450 on the English part of the SATs? ::)
Rsquared Posted January 2, 2014 Report Posted January 2, 2014 Alright smart ass. I was trying to leave a little wiggle room with the 3.750 I threw out at you. Here's the mag. And a factory Hornady 285 gr BTHP.
bubbasks Posted January 2, 2014 Author Report Posted January 2, 2014 What powder is "H4835"? Is this some new, super secret formulation? Let us in on it! Or as most of us here did you score a 450 on the English part of the SATs? ::) i had messes up and put 4831 first and tried to change to 4895.
survivalshop Posted January 2, 2014 Report Posted January 2, 2014 The lead sled kinda takes all the fun out of printing good groups <dontknow> Sure shows what the rifle & ammo is capable of, though.
Dane Armory Posted January 2, 2014 Report Posted January 2, 2014 Alright smart ass. I was trying to leave a little wiggle room with the 3.750 I threw out at you. Here's the mag. And a factory Hornady 285 gr BTHP.Now that's what I needed. 3.791" is the mag length ! Thank you !
bubbasks Posted January 2, 2014 Author Report Posted January 2, 2014 (edited) The lead sled kinda takes all the fun out of printing good groups <dontknow> Sure shows what the rifle & ammo is capable of, though.Thats the point of load development. To make the best load for a gun and anything after that is shooter. The sled is only used for testing. Removing shooter reduces variables. All groups outside of development are on the shooter Edited January 2, 2014 by bubbasks
98Z5V Posted January 3, 2014 Report Posted January 3, 2014 Damn, he does own a set of calipers... <laughs>
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now