Rsquared

I gotta get one of those for one of the SBR's.

Definitely a good way to hit the "Off" switch.

Got the Noveske 10" 300 BLK barrel today from the big brown truck. I'll have to take some measurements now to make the final decision on (maximum) handguard length. Almost have everything I need.........short of the tax stamp........DAMN......still waiting.

308Lite You can run a heavy buffer with an adjustable block. Nofail was just saying that he's running the JP lo-mass carrier. I run one of Slash's heavy buffers with an adjustable block on two of my AR-10 carbines. PRI block (JP block on the other), CAR10-XH buffer & spring, UBR, and a standard Armalite bolt carrier. The combo of the JP lo-mass + the restricted gas + heavy buffer could cause problems. Though.......you would still think that you could find the sweet spot eventually. Haven't played with any of the lo-mass carriers personally yet.

I'm all for this one.

Yeah, I know that the YHM is outta stock. Just like the look. Big fan of the Geissele though. Kinda leaning towards that one. Just that it's 9.5". So I gotta wait until I can test fit the barrel and take a measurement. Already jumped the gun (so to speak) once with the AR-10 SBR handguard. As you know, ended up getting another handguard for that one (courtesy of Edge's eagle eyes)......and now I'm stuck with having to build another AR-10 to use up the first handguard. Damn.....such a high-quality problem as they say. As I said though......I'm always open to suggestions. Keep em coming fella's.

So.......as some of you guys know, I've been waiting on my Form 1 for my 300 BLK SBR build. I've been slowly gathering parts as I wait on the feds (Sent Form 1 to feds in October). I originally wanted to get one of those AAC uppers with the 9" barrel. I liked the look and design of the Knights rail that AAC was using, and I figured....Ehhh....no hurry. Then.....the jerk-off in CT showed up (no...not Drew) at Newtown. And the rest is history.......we all know what happened to parts and ammo since then. We all watched as all the parts and ammo rode off into the sunset.......leaving many of us behind to fend for ourselves. Talk about a day late and a dollar short.........as usual. Anyway.....I digress. So I, like many of us on this board, have been slowly and patiently buying parts as they emerge (at a decent price). A lower here....an upper there....the occasional LPK (or 3). And mags.....talk about something that took on the resemblance of refrigerant (Freon to you guys not in the HVAC/Mechanical know).......those things simply evaporated. But.....they would occassionally pop up at a (once again) fair price. As long as you (all of us) were patient. Yeah....yeah......I know I'm being kinda long-winded, but I'm gettin to it! It's my story after all! <laughs> So I've got the DD M4 lower (w/DD LPK, Bad-Ass Levers, Raptor CH and Magpul CTR)...the Aero Precision upper...an SI Defense BCG.....and a AAC brakeout comp waiting for a barrel. The barrel........I just ordered that last week from Midway. A Noveske 10" stainless that I stumbled across. That thing should be here Monday or Tuesday I think. And so, that leads me up to the opinion that I'm interested on gettin outta you jokers. I know, I know........some of you are saying that it's a about damn time! So, the question of handguards. Now keep in mind, you animals, that I gotta be able to get to the QD release on the can. So it can't be buried inside of the handguard. Though that would look very cool. So I've been poking around and I've got it down to a couple of ideas. Though I always keep an open mind.......just in case one of you degenerates happens to come up with a great find (it's been known to happen). So I'm thinking one of these: http://www.rogtac.com/upper-parts/rails-handguards/noveske-nsr-rail-9-fde.html or one of these: http://pkfirearms.com/Geissele_Handguards/266/c or maybe one of these: http://yhm.net/index.php?main_page=product_info&cPath=2_4_48&products_id=90 And as usual....you'll notice that, for some reason, the things that I pick out always end up being F-ing expensive (not on the YHM as much). Dammit.....why can't I like CMMG? <laughs> ****NOTE : No offense to any of my brethren that currently use/own/are-a-fan-of aforementioned manufacture. So.......lemme here any opinions or ideas that any of you yahoo's may have.

Same here. That's the one I run on my SASS. I might be a life-er when it comes to NF glass.

Yeah.....him and I go waaaayyyyy back.

That works.

Well it's about time. <laughs> Just kidding. I know all too well about BATFE timeline.

You guys are killing me. I'd leave this area in an instant if the job wasn't in the area. That's why I always say how places like Wyoming are calling my name.

Well how could you not have fun doing s h i t like that?

You won't be whining once you get it. But you'll have to keep your friends from drooling on it. <laughs>

I'm with you on this one Robo. I could use a couple of these myself. I've been on the lookout for some of these for a while too.

Pretty cool. Iiiiiiiiiiiii like it!

Nice. <thumbsup>

Too tight? Hmmmmmm.....interesting. Like you said.......you'll see.

Good lookin unit there Blue. I like those CF handguards.

Having Italian sausage off of the grill.

Yeah, both of my builds are gonna have just the muzzle device sticking outta the rail (the MK18 look). Already have the rail for the 10 (Edge actually found it for me....always grateful my man)......just gotta find one with the right "look" for the 300 BLK.

That's a big negative there ghost-rider. The barrel is a keeper. I catually origianlly planned on a AAC 9" for the 300 BLK. But those puppies have completely evaporated. I just saw this Noveske barrel last night. Pondered that all through the day, and decided to roll with that one. 1, because it's available....and 2 because I like Noveske parts. They make nice stuff (in my opinion). It's a 12" Noveske barrel that I've got for the AR-10 SBR. Still need to decide on a handguard for the 300 BLK. Hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm..................................

Wow. You guys are giving me waaaaayyy more credit than I deserve. Now the pressure will be on. <laughs>

Amen to that my brother, on the BAD parts. Thanks for the vote of confidence on the SBR. That form1 was sent at the same time as the one for the AR-10 SBR. And as soon as I get the paperwork from the feds, both of those bad boys are gettin assembled the next day probably. I'll even take that as a compliment.....being compared to Tom that is. <lmao>

10 " Noveske 300 BLK stainless barrel for one of the builds that I'm gathering parts for. A couple raptor/bad-ass lever combo's.