survivalshop Posted May 9, 2016 Report Share Posted May 9, 2016 I would be interested in a Black Rain 12" , if you have one in the bunch . Quote Link to comment Share on other sites More sharing options...
washguy Posted May 10, 2016 Report Share Posted May 10, 2016 Daaamn I think i got a wooodie lookin at all that Wash Quote Link to comment Share on other sites More sharing options...
texas30cal Posted May 10, 2016 Author Report Share Posted May 10, 2016 I did get more today, even found a couple of barrel nuts to use as patterns. I'ii get more pics tomorrow so you can pic what you like, most of the uppers have a small offset where the drills met when the drilled the main hole thru, some are near the front, some near the back. ill try to get a pic of that but I really doubt it is enough to be a issue. I will put a barrel in the worst one and see how the bcg works and how the bolt closes. Quote Link to comment Share on other sites More sharing options...
texas30cal Posted May 10, 2016 Author Report Share Posted May 10, 2016 How about these wash? The guy that works that area says they get a load like this almost weekly!!!! Idk how they are making money with that kind of scrap Quote Link to comment Share on other sites More sharing options...
washguy Posted May 10, 2016 Report Share Posted May 10, 2016 Daaaaaamn. Wood for sure Could be a build in my future? Wash Quote Link to comment Share on other sites More sharing options...
blue109 Posted May 10, 2016 Report Share Posted May 10, 2016 That's why you pay $200 for hanguards..... Quote Link to comment Share on other sites More sharing options...
texas30cal Posted May 11, 2016 Author Report Share Posted May 11, 2016 EXACTLY!! I was told that they get this almost weekly, I never worked in a machine shop that would tolerate that kind of scrap rate. Quote Link to comment Share on other sites More sharing options...
planeflyer21 Posted May 11, 2016 Report Share Posted May 11, 2016 7 hours ago, texas30cal said: EXACTLY!! I was told that they get this almost weekly, I never worked in a machine shop that would tolerate that kind of scrap rate. We got called into the production office quarterly, with management asking what was wrong that we scrapped a(some) part(s). Proud to say my rate was zero percent. Savage for many years was the only major manufacturer to use an in-process QC. It was how they supplied gnat's ass accuracy at half of what Remington and Winchester did. No scrap, no waste to buy over and over again. Quote Link to comment Share on other sites More sharing options...
texas30cal Posted May 31, 2016 Author Report Share Posted May 31, 2016 Hey sorry I've been absent, work here at the shop has been crazy, now we had all this flooding. Well over 30" of rain in 24 hrs. About half the house got flooded, when I was waiting for water to go down so I could get into my house a guy tried going trough water over his hood about 150 yds from my house, got washed away. Two days later I was driving a ranger down there for body recovery:((. I promise I'll get pics and a list up when things calm down. Quote Link to comment Share on other sites More sharing options...
texas30cal Posted August 8, 2016 Author Report Share Posted August 8, 2016 Anyone who expressed or has interest in this please pm me, thanks! Quote Link to comment Share on other sites More sharing options...
guruofhotrod Posted August 11, 2016 Report Share Posted August 11, 2016 On 8/7/2016 at 9:11 PM, texas30cal said: Anyone who expressed or has interest in this please pm me, thanks! PM Sent Quote Link to comment Share on other sites More sharing options...
Apachejoe Posted July 16, 2017 Report Share Posted July 16, 2017 I have a Rock River Arms AR10? LAR8? 16", Thought I'd put a Low Profile gas block and slim clamp on forearm and man! I cant find a forearm with the right treads. Don't know the different patterns and also purchased a tubular 12" from RRA,then the barrel nut is made in the dang thing so, cant use the low profile gas block and gas tube unless there is some voodoo to get the gas block on after the forearm and gas tube is in place! all I wanted to do was change out the Factory forearm to a slim 12" clamp on and now its a guessing game or gamble if I buy a Forearm with the right thread pattern !!! any help would be great!!/anyone!! Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 16, 2017 Report Share Posted July 16, 2017 Pics will help... of that handguard you bought... Quote Link to comment Share on other sites More sharing options...
guruofhotrod Posted July 16, 2017 Report Share Posted July 16, 2017 (edited) Welcome from California, feel free to introduce yourself here: https://forum.308ar.com/forum/33-rock-river-arms-lar-8/ This thread hit a "dead end" - long story - might be a good idea to post in this section: https://forum.308ar.com/forum/33-rock-river-arms-lar-8/ I'm not sure what the RRA barrel nut thread is - it may be unique to that brand - there are a few here familiar with that platform that should be able to shed some light on things Edited July 16, 2017 by guruofhotrod Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 16, 2017 Report Share Posted July 16, 2017 This might help, as well: https://www.google.com/#q=RRA+LAR8+free+float https://www.rockriverarms.com/index.cfm?fuseaction=category.display&category_ID=205 http://www.calguns.net/calgunforum/showthread.php?t=375718 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.