survivalshop

I don't own a Key Mod HG . M-lok

That should be at the top of the Main Forum Page . The Brass , is not Ejecting properly , could be a couple of reasons , one we are writing about is Gas Volume , the Brass not releasing from Bolt or the BCG is not traveling rearward far enough for the fired Case to Eject & the fired case is being forced onto the Feed Ramp , the Dent . Buffer spring may have a lot to do with it . The bent unfired Cartridges , show that the rearward of the BCG was short , but far enough for the BC ( not the Bolt ) tried to feed a live round & the non-ejected fired Case was still on the Bolt Face or was just lying in the Chamber area & the two tried to feed together . Disassemble the Bolt & inspect , clean .

I think someone here, had issues with that Gas Block on his 308, made for 5.56 & the like , couldn't move enough Gas or something to that effect. Have you tried one Round loaded in the Mag & see if the BCG locks back with the Bolt Stop , that will tell you in a crude way if your getting enough Gas signature to operate the Action or its a Bolt Component . Is the Buffer Spring you have for a 308AR or is it for a AR 10 ? Running her Wet ?

I'm beginning to think they are not releasing the whole story & if there were two shooters , they were both probably from that same Room ( there were two windows broken out ) , 98 is right , untrained , without experience & in that environment , hard to pin it down.

This thread has been idle for a couple of days , so I thought I would post this infowar's compiled video. https://www.infowars.com/explosive-compilation-las-vegas-survivors-speak-out-multiple-shooters-in-multiple-locations/

Tool Porn !

Sometimes you need that Recoil .

& we want it a fast one

I have Lapped every AR Receiver I have ever assembled . I use a Lapping table & Aluminum Oxide Lapping Compound from Brownells , I have a great deal of experience Lapping components of all sorts , you have to have a lot of experience to do it free hand , compared to a Tool like JT used ( which I will be purchasing ), but you are only Truing up the Receiver Face . Most don't need much , you basically are only taking off any coating or finish on the Receiver face , because it can build up there . As far as saying it made a difference in the accuracy of the Rifle , well, it can't hurt, if done correctly & you would have to lap a lot to alter the Head Space . The Loctite Reaining Compound is a good idea & as 98 put it , it really hasn't been tested by us here to any degree , but I trust Criterion Barrels with this procedure , its where I got it from & it was this year that I started to do it , so can't say what or if it helps , but its a sound procedure . I have my 25-45 Sharps Rifle that I changed Receivers on & used this procedure on & I have Targets from before & as soon as the weather gets to a point I can sight the Ammo in , we can compare the group sizes , before & after . As far as the Retaining Compound squeezing out , I'm sure some stays where its needed .I have used it in Pumps ,Bearings & Wearing Rings , among other Components & it makes a difference in their operation , less Vibration is one of the benefits . Any time you remove & reassemble a Barrel , you should check Head Space .

Ends tonight. *While supplies last. Prices & availability subject to change without notice. Some Restrictions Apply. All federal, state, and local laws and ordinances apply. This offer may not be available in all localities. See complete terms and conditions.

It's the one I use now a days . " A moment frozen in time "

I had this guy in my back yard the other day @ 0730 , too bad I don't hunt anymore , this guy was chasing a Doe who was to the left out of the Photo, they had full attention on me taking the photo. I have a feeder close to them , but he wasn't looking for that kind of food

I always wanted an Airboat , but man, he said 100 MPH in an Air Boat ( at night ) has to be some ballsy $hit . Tuning remote is cool . I have seen these Boats with Alison Aircraft Motors in them . I also noticed he has a Duoprop set up , counter rotating , probably for stability , I could see the torque with that motor flipping the boat over . I want one ! I didn't see any of these on this motor ; from Florida regulations Muffling an airboat's exhaust with automotive-style factory mufflers, underwater exhaust, or other manufactured device capable of adequately muffling the sound of the exhaust of the engine is required in Florida,

This whole thing is got a stench that keeps getting worse . I know the investigation is still ongoing , but shouldn't there be some facts that can be shared , if anything , to suppress speculation . I'm talking FACTs , not heresy . The sound or acoustical signatures, if properly done, can shed a lot of light to this whole thing , I think its an interesting tool that can be used .

Several of guys at Camp went to the 20 ga. , but they all had Remington rifled BBL's & shooting Sabo rounds & all shot good like that. Now that we can use Straight wall rifle cartridges , most went to the 45-70 or 444 Marlin . When I was using my 12 ga. 1100 Remington , smooth bore , I started to use "True Ball " Slugs , I think made for LE , but they shot real good with the smooth bore BBL. , Stoned every Deer I shot with them . This Cartridge the 224 Valkyrie looks good & I will have two read more on it , as far as Mags needed & such , but the only thing I see with all the large Powder capacity , small Bullet Cartridges is , Short Barrel life . I guess if your a Target shooter , that won't be an issue , because you will be changing barrels out regularly any way. I too have not found a Hunting Bullet for it , yet .Should not be an issue for Bullet makers to produce some though .

Not only Suppressors , but concealed carry reciprocity . https://www.infowars.com/video-celebrities-tell-america-to-reject-nra-concealed-carry-over-las-vegas-shooting/

Well ,you could say that about some Knives .

& the Loctite 609 retaining compound will help is several ways , Receiver & Barrel Extension are two different materials & expand at different rates , the retaining compound will more evenly control the expansion rate . It will also uniformly lock the two together & seal or fill in any gaps between the Barrels Extension & Upper Receiver . Even if you have to pound the Barrel/Extension in , it may still have gaps in fitment between the two . Most just push in .

When I lived in Ohio , there was one week we had two Hatchet murders in one week , so does that count as an edged weapon ?

From listening to her , I believe she is .

So , except for the Suppressors , if they had a FOID card , they would of been OK , they didn't say they sold anything . They have wanted to ban the 80% Receivers since they came out , nothing new there , but because two down on there luck people wanting to sell their firearms, ( if they are theirs to begin with ) the 80% so called Ghost guns a bad name ? Now we have , anyone staying higher then the first floor in any place & owns firearms , is now a potential Vegas shooter , look alike . WTF , but who knows , they sound like they need a place to stay & will get one , free

Damn 12 ga. Slug in any form is the most deadliest round out there for hunting , of course under 100 yards for most slugs . I do have one Deer Kill at 158 yards , but with a Designated Slug Gun, rifled bbl. with Hornady 300 gr.,Sabo's . Most have been under 100 yards .

I just saw that they were going to be one" its" show , WTF , they must have out bid everyone else . That stupid Cow is a Flaming Libfuk & that in its self , tells you something about the whole situation . Coming out of the wood work to go on" its" Show , the were probably out of sight to get their stories together . It also raises other questions about the so called Security Guard & his qualifications , licensing , among other things .

Interesting Target Cartridge , probably not legal to hunt big game with a .22 Cal. in most States .

We knew this & you won't see this on the MSM . http://www.breitbart.com/big-government/2017/10/16/fbi-over-four-times-more-people-stabbed-to-death/ Check the FBI's table of Murders , state by state in this article . https://ucr.fbi.gov/crime-in-the-u.s/2016/crime-in-the-u.s.-2016/tables/table-12