JMoto

308 match ammo will shoot great out of it is my rifle is an example.

I have been running the stainless for a while now. If it is sunny I throw it on a towel to let it dry, in the winter I put it in front of an air duct. If I feel froggy I will blow the majority of the water out with the air compressor. The best part of all is no more cleaning flash holes and primer pockets.

Fred, I believe we are from the same area. If you want to test drive some measuring devices I can help you out. I know some people like to play with stuff before they buy it.

I have no PERSONAL experience but have read of them breaking the adjustment off. Then again I read this on the internet and we all know how that goes.

Yes

I do but that camera died in the midst of transferring the pics. When I find the charger I will post them. Would you like them here or in a separate thread?

MAJOR UPDATE JP enterprises JPGS-8 adjustable gas block DOES fit the SASS barrel. At the very edge of the shoulder the gas tube hits for .03 in. I took a fine file and remove .002 which appeared to simply be the park on the barrel and hit it with some bluing i had laying around. It will fit under the JP tube, but not the sass factory tube. A lot of folks looked at pictures and said that it will not work. I ordered it and tried it to see for myself.

bigbada is good to go as far as being a buyer. Good on coms and paid quickly.

I will cover the shipping to the continental united states. You also must be able to accept 20 rounds mags in your state. also, updated original post. SASS rail is sold and will ship out saturday morning.

PM replied bigbada via email as requested.

I have yet to convince myself that I need one but everytime someone else talks about one I get tool envy.

If you have proper clearance for the bolt hold open and you have a tested with the gas full open you may have th gas block misaligned. Most people assume the gasblock mounts right up to the shoulder but in many times this is not the case (if your barrel even has a shoulder). You should check there to make sure.

2 mags sold locally. If you buy all ten remaining mags I will sell for 23 dollars each.

You will also need a buffer tube (rifle length)

How much clearance do you have between the bolt face and the bolt hold open? You should have about 1/8 of an inch.

Did you adjust the gas flow to try and fix this? If you have the gas turned too low it will not cycle the carried back far enough to lock the bolt back. Try adding a little bit more gas and see if that fixes the issue. When using and adj gas block you want to set it up so the rifle runs with the lightest load you will be shooting from the gun. In addition to this, the way you shoot the gun during adjustment will also effect it. You provide a different amount of resistance to the rifle in different shooting positions. Meaning your body will be absorbing the recoil differently and this will have an effect on the cycling of the weapon.

I was with you until the very last line jgun. It is no more punishing shooting it in an enclosed space than it is in an open one. A bit louder, but from my experience under stress you usually do not hear the gun firing.

That is cool, just let me know. I had some interest locally but nothing solid yet.

FS 12 DPMS LR 308 20 rounds mags. These are new in package except one I pulled to take pictures and confirm they are 20 rounds mags (the old ones were 19rd) Ten mags left. Purchase all ten and I will sell them for 23 dollars each $27 dollars each unless you buy Ten or more then I will make you a better deal. DPMS S.A.S.S (308) full length free float tube. I pulled this off of my SASS includes nut and timing ring for lack of a better term. Everything seen here http://www.dpmsinc.com/store/products/?prod=1844 Like new except 2 small nicks from the bipod mount and front sight. $150 (SOLD SOLD SOLD) Feel free to ask any questions you may have. I do not get E-mail notifications for thread responses so if there is a delay in my response feel free to PM me as I do get notifications for them. I generally take a couple of days to ship items. I am upfront and honest about it. My cell number will be made available to anyone that requests it upon receipt of funds. USPS Money orders only. Shipping is negotiable, as stated i usually take a day or two to ship so I generally cover shipping costs to hopefully counter my slowness. Local pick-up is available if you are in the Detroit area.

thanks, I will shoot them a call Tuesday.

If you would not mind grabbing the issue date or number on it that would be nice. I am sure the person on the phone will not actually be familiar with the publication. I would really appreciate it.

Yeah, when I got my subscription I THOUGHT it said it included their special prints as i bought 3 years worth. I could be wrong though.

Many of them are the same ones that won't shoot theirs or cannot hit water if they fell out of a boat.

That is odd, I have not gotten mine in the mail yet.

This is what I intend to do when i can. I will report back with results.