Jump to content
308AR.com Community
  • Visit Aero Precision
  • Visit Brownells
  • Visit EuroOptic
  • Visit Site
  • Visit Beachin Tactical
  • Visit Rainier Arms
  • Visit Ballistic Advantage
  • Visit Palmetto State Armory
  • Visit Cabelas
  • Visit Sportsmans Guide

MikedaddyH

Specialist
 View Profile  See their activity

  • Posts

    8,224

  • Joined

  • Last visited

 Content Type 

Everything posted by MikedaddyH

  1. MikedaddyH
    Made some subsonic 9mm rounds with Titegroup and small piston magnum primers. Used 115gr round nose bullets. Will test them on the next range trip.
  2. MikedaddyH
    Great Pictures and Videos ! THX Greg !
  3. MikedaddyH
    The Midwest Industries T series handguard for the AR15 is what I have on 3 rifles.
  4. MikedaddyH
    Funny Rob ! If you want me to I could reduce it by 25% if you need me to. The 10-22 is so cool carbon fiber handguard and with a silencer it is soooooo Quiet ! 8)
  5. MikedaddyH
    Powerbuilt in anodized red , comes with a razor knife and pouch. Also a Coleman had this for years it lives in the tool box.
  6. MikedaddyH
    I used to hum the theme from The A-Team while buzzing around on my motorcycle. <thumbsup> Jon I didn't know Murdock rode a motorcycle, must have missed that episode ! <lmao>
  7. MikedaddyH
    .45-70 or .45-90 with a steel or brass butt pad...Like getting punched in the shoulder by Mike Tyson. What fun :cookoo: PAINFULLY FUN !
  8. MikedaddyH
    Maybe you could use the Magpul upper and add on a couple of rails. If there is a fitment issue the plastic is much easier to work with.
  9. MikedaddyH
    THINK BEFORE YOU DECIDE TO DO THIS ! If it is long not a problem, BUT if it is short you are grinding Aluminum and doing touch up spray painting. Real PITA ! Been there did that. Good luck !
  10. MikedaddyH
    Here is the Folding stock which was developed for the 10/22 gun orignally. Fits on piston AR15s.
  11. MikedaddyH
    AR-308 Delta Kit @ Brownells. This will make it fit over the barrel. But there is no guarantee the rail will be in the right location with the gas block, spacing may be off !
  12. MikedaddyH
    And this is NOT Gun Buyers Anonoymus ! <laughs>
  13. MikedaddyH
    Their is nothing wrong with the DPMS 24" bull barrel that Brownells sells , the one I get from them shoots sub moa ! The down side is its heavy ! My gun weighs 19 lbs with a loaded mag, bipod and scope.
  14. MikedaddyH
    I only have one bolt gun.
  15. MikedaddyH
  16. MikedaddyH
    My friend Kevin @ AGP makes a folding stock for the 10-22 rifle and its a great setup. I'll did up a picture later.
  17. MikedaddyH
    Do you like the Pig snorking comp on that ? I like the Levang Linear Comp on my AR pistol. Both throw flames down range.
  18. MikedaddyH
    Here's are a few female TV cops and their guns : Brenda Lee Johnson - Glock Thresa Lisbon - Springfield XD Kate Beckett - Glock Grace Van Pelt - H&K MP5
  19. MikedaddyH
    WTF happened to Damien ??
  20. MikedaddyH
    I have been keeping track of my barrel builds and on the rifle length gas ports I had to open up the hole to 0.106" or 0.108" on the 27 caliber barrels to get them to cycle.
  21. MikedaddyH
    Wont be using lead on my rifles !! Thx guys.
  22. MikedaddyH
    http://www.mdshooters.com/showthread.php?t=62887 regular and subsonic loads
  23. MikedaddyH
  24. MikedaddyH
    http://cartridgeloaders.com/article/subsonic%20308%20load.html subsonic 308 loads
  25. MikedaddyH
    http://emptormavon.com/2011/09/7-62-thumper-subsonic-xcr-rifle/ 7.62 thumper and 300blackout guns
×
×
  • Create New...