Dane Armory

What little part do you need ?

I hope you are a reloader so you can customize your loads ! You may have to tinker with bolt carrier weight , buffer weight , buffer springs and gas port diameter size. Have fun and good luck !

I color code my magwells and magazines with plastic tape : 6.8spc= blue 9mm= red 300wsm= yellow 270wsm=green 40s&w=white Will still need to get more colored tape when the 300blk , 7..62x39 , 10mm auto come into play.

OK this is the one thts less than 4 miles from my house. I been wanting to check it out so now I have to. Got to get another lower. Support my local businesses. Spending my money in the hood ! Like the right side mag release button !

Are these made here in the east valley of PHX ??

I don't have one in front of me BUT... the one in the picture is the old (orignal)highrail upper. It is 9/16" high and comes on the round handguard setup. The New low profile 7/16" rail height upper is the one which is adapable to the dpms quad rail which is being sold now. The old rail is good for a scope rings so use it for that. When you upgrade get the low profile upper and matching height quad rail that you desire. Sorry if that is not what you want to hear but that is why many people sell the old dpms upper.

CHEVY Volt

Shibi... Get the trigger then we can do a side by side comparision ! Fun ! Fun!

Did he state that he did machine work for them.

I wanna shoot Shibi 's first. I have one bullet hose already ! Would be nice on a sub gun.

I wouldn't worry about Greg and his sbr !

JGUN, My 300wsm and 270wsm work ! Modified PMags hold 8-10 rounds. Upper has to be modified, bolt also. Talk to Tom he has shot it. Look for my old theads.

Worked on the 1-10 twist pistol barrel today. Roughed the ends and the barrel extension area is readyt to be threaded , the muzzle is roughed and ready to be threaded with 5/8"by 24 for a comp or brake. Will profile the barrel to .936 and less.

Ron ... you waiting for me to chime in ! OK ! I have 3 pistol barrels I am working on... And 3 more pistol blanks just waiting.

Maken' shitt look Purtty ! Lol

I started the first prototype for this today. Will work on it Saturday and Monday. Should be interesting.

I have 300 projos, 90 , 100 , 110 grains hiding behind some primers.

Welcome from az !

From the data that I have read th "Sweet Spot" length is 9.5 inches for a 1 ~ 8 " twist barrel. I want to try a 1~10" twist barrel for light weight projectols like 90 to 100 grain bullets, seen no data for this there might be a market for it. The reason the 300 aac blk is so high is a supply/demand thing.

Dude before 3 weeks ago I had never seen an intacted Crisanthnun on a Arisake. Saw 4 receivers and now 3 complete rifles. My dads old war trophy was scared with a buttstock.

Not ours ! Customers guns !

3 yes 3 all with No scractes on the markings.

I applied for the job but didn't get it. Would have been a perect fit.

Hoe Lee Shitt ! Iced race course pulling a farm animal. I know somebody filmed it. Gotta see the silent film with piano music in the background. LOL

Jon go back to sleep you are dreaming.