98Z5V

Here, here! If I told you to get the fuk off my property, when you're at my front door, yelling and being all agro - you have ONCE CHANCE to leave. Now, where the gun guy fucked up, before he went and got his gun, - all my humble opinion here - is he didn't do one thing... Looking at it now, just in videos, with all the aggression going on from green shirt... Here's what I would have done, AND THEN turned inside and got my gun. If he would've DONE THIS, and green shirt is still there, AFTER THIS, it definitely proves that green shirt is super-aggressive, and want more, and now he's gonna get more. Planted back foot, full force fucking front snap kick to the sternum, and LAUNCH that motherfucker backwards off my front porch. NOW. Don't look where he lands, who cares. He's gonna need a minute to catch his breath anyway, so that buys time. Turn inside, grab PC Carbine, and return to the front door. If he's coming at me, pop pop. Done. I don't know if this was a clean shoot or not, that's for a jury to decide. I know that green shirt guy is a fucking maniac, and he was not going to stop the escalation of this, even when faced with a firearm. He thought he was 10 feet tall, 3 rows of teeth 2 coats of hair, and bulletproof. That's just not real for him though. There can only be one of us like that...

Tell them to FUK themselves, and show proof of the date that you had to 4473 the lower (by serial number), and tell them to bring the court case...

That's tough, here - the dude in the green shirt never left, and kept pushing... And wouldn't stop. I'll tell someone to leave my front porch. They can leave, or not, and if they persist, they WILL leave my front porch - that is MY domain, not theirs. They don't have a right to MY property, no matter what. That'll be a sticking point in this case, especially with the video that is out there... Again, my read on it...

This right here - but it's all gonna come down to "brandishing a firearm" in the court of law. "Brandishing" is gonna be what decides this... The dude in the green short did try to take his gun. That's on video. Green shirt DID state, "I'll TAKE IT FROM YOU, MOTHERFUCKER!!!"... I'm just sayin'... IMHO, the dude in the green shirt is a fucking asshead, and finally pushed the whole *extended family* beyond the point that anyone could take. Domestic just plains fucking SUCKS. There's WAY MORE to this story. We just don't know it yet. Not enough information. No way to tell, with two aggressors mixed in there, at the same time. Short story long, that aggressive sum'bitch in the green shirt - isn't anymore. He'll never be a "family problem" again. That's my read on it.

More Aaron Lewis worth watching, just for the commentary. Trust me on this one. Run it.

He's here soon, but the venue is being completely stupid with COVID rules. Show vax, show neg test, etc. I'll wait to see him again, because of those idiots running the venue.

There's contact on the ears of the lower receiver by the BCG in this pic above. With that internal depth measurement, and a 3.250" long AR15 buffer, it's not even possible for the BCG to make contact with the lower receiver in the spot that it did. Did you cycle the gun without the buffer and spring in there, once or twice? Something marked that lower. At any rate, you can shiitcan the whole recoil system, and save it for an AR15 build, and get the Armalite kit that was suggested, OR... You can get a KAK .308AR Shorty buffer that weighs 5.3oz (close enough) and use a Sprinco Orange recoil spring with it, in the extension that you've got. Then, you need to see if you need to fix the gas tube, and the gas port size. Then, your gun will run. Guaranteed. Here's info on why this stuff works:

Happy Thanksgiving to all my brothers here - Savages though you be, I wouldn't trade any of you for the world.

What's the internal depth on that carbine receiver extension? There are only two propper possibilities; 7.000" internal, or 7 5/8" internal. No matter which one it is, that 3.250" long AR15 carbine buffer shouldn't allow that BCG to slam into the ears on that lower receiver.

Live bar stool performance from Aaron Lewis. He's the king of this.

I've got some even more crazy shiit for you than that, that's actually real, but it's not time yet. Be patient.

Rob was skeered after that. She whooped his ass... We're gonna WRECK this man that she has, come 11 Dec. He's in for a reckoning... Don't treat this girl wrong.... You have one chance...

That just means that we have the capability to wreck him. We've wrecked you before, so there isn't anything unpossible here.

I have 4 that I deal with. One in North Phoenix, one in Mesa, and one in Avondale, then the one in Tuscon. The gun-counter kids piss me off, like you stated. Most of them don't know shiit, and they are NOT gun-guys. They don't have the experience. So, I don't ask them questions, besides, "Gimme your powder book and tell me what powders you have in stock when I ask about specific ones..." They're helpful at that. I bought a set of Warne Maxima steel rings for the Win Mag there, and the kid asked what I was putting them on. I told him a Rem 700 Long Range in .300 Win Mag, with the EGW 30 MOA rail, and a 6-24 scope with 56mm objective. I had the Low rings that I needed. Well, dipshiit tried real hard to tell me that I needed Medium rings for that combination, and I told him he was wrong. Then, he asked that the rifle was for. "It's to shoot a mile, kid." Then, he starts telling me everything involved in shooting a mile, and says that factory ammo won't get there. I tell him I handload - and I'm getting pretty tired of the conversation by now, so I tell him to give me the fucking Low rings that are on that back wall. He again had to chime in... "They won't work..." I'ma slap you right now if you don't give me what I just asked you to give me, punk. So, the Low rings worked, the rail had me at a 500 yard zero, and I went back and told that shiithead that everything went great. I don't need their commentary on what I'm doing, and don't trust their gun advice. But the store is good.

This is fuckin' HLARIOUS!!! We set up a shoot down here for Dec 11th. One of our friends that shoots with us, Kenny, brings a family friend's daughter out to shoot with us, Hannah. She's a badass kid. Seems, she's met this Army Reserve guy, things are heating up, so... Kenny already warned the kid. "She has LOT'S of Uncles, that have LOT'S of skills and guns, and won't hesitate to take you apart and spread you around in the desert... If you ever do anything bad to Hannah..." SO! The kid is actually gonna come out and shoot. At least he'll get here. He'll get the fucking picture pretty quick, I bet. This is gonna be a funny shoot-story, that I'll have to put up, and I'll make sure I get vids. It'll end up something like this, I'm sure... https://www.youtube.com/watch?v=8Lz36kLYid0

Aaron Lewis LIVE... cannot be beat. Here's his new one live, and it's pretty badass...

These guys always go north - my locals, here. I want to take them south, to the Ogilby area. They've never been down there...

Brother, I miss you IN the dunes. It's been way too long, and we need to do it again. I think I know a guy I can borrow a cage from, and get back out there. I have a cool co-driver on standby for the next one. Next trip out for the local guys - you'd LOVE them and fit right in. New years. I'll get the exact dates soon, because I'm planning it. The LT-R is going, for at least a few rips so I can let loose, so @Moon Boots will have to ride with Kevin or Marco on those trips. I need to get that fucker back out there in the sand, on knobs, and fuk some shiit up with it.

Found I couple pics that I knew I had - just been a busy couple of weekends, back to back... Saturday night sunset. We ended up rescuing a dude about 300 yards from camp that night. New owner, with his little kid, hung up on an 8-ft high hill, just buried it. That's what new people do out there, hammer down and get stuck. Here's the sunset... Saturday, during a day run, our buddy Mark STUCK his rig hard. We all turned and went back, and see this - no right rear wheel, no halfshaft, no trailing arm, no radius rod... I pulled up on the hill above him, and just look down about 15 yards, and I'm thinking... "Where the fuk is the right rear wheel, and I need to go look for it... somewhere downhill..." He just got way off-camber, and buried that thing, ALL THE WAY under sand. It didn't take long to get him out, but Joe gave it a good rip with his tow strap, on a 300hp rig, trying to rip him downhill. That ended badly, filling Mark's rig FULL OF SAND!... Mark looked like a sugar cookie about 0.2 seconds after Joe slammed the pedal... We ended up lifting the rig out, little at a time -pick it up by the roll cage, get the tire out of the hole, the sand fills in the hole underneath the tire. This is me, getting the mountain of said off the roof, so we weren't eating it lifting from the downhill side. Pic courtesy of @Moon Boots , up in the rig on top of the next ledge. That sand is 'UGE out there, men. Massive.

If that is indeed the set, then this is the important information on that page: Functions with nearly all available DPMS pattern large frame parts Rail height is DPMS High DPMS thread pitch front bore

I'm up now, brother. Call, if you're still up, or call me tomorrow night. Of the next night, or...

That's hardcore, man. At least you're getting some LC brass outta the deal.

Yes, it is, brother. I NEED you out here with the Gang of Deplorables sometime... 🥰

Load 'em and process brass. You're thinking too much again, here. Cart before the Horse. Don't think too much about this, you're getting way too far out on it, Load for your gun, and stop worrying about other peoples headspace measurements are... They're not loading for your gun...

Right? Rob is a dick. Sometimes. For that mile shot, I'll set that up anytime it works for both of you, just let me know... @Moon Boots and @blue109. That's all we'll do. I'll bring the gun, and ammo, and we do it until we all hit it. We already know the gun and load is capable of a one-and-done. I feel like I really need to rub that one in, deep, too... I don't know if I can stop rubbing that one in...