bubbas4570 Posted February 21, 2016 Report Share Posted February 21, 2016 When putting on a muzzle brake, or flash hider, is there any need for anti-sieze on the threads.....or am I just being a bit WAY too anal? Quote Link to comment Share on other sites More sharing options...
Malig8r Posted February 21, 2016 Report Share Posted February 21, 2016 There is no real need to use anti-sieze on the the threads there. A good option would be "Rocksette" to ensure the muzzle device remains locked in the properly timed orientation. Even that is not a necessity but it is a nice to do. Quote Link to comment Share on other sites More sharing options...
bubbas4570 Posted February 21, 2016 Author Report Share Posted February 21, 2016 Maybe a bit of blue locktite even....instead of worrying about keeping the threads "free"....makes sense. Quote Link to comment Share on other sites More sharing options...
bubbas4570 Posted February 21, 2016 Author Report Share Posted February 21, 2016 ....or just quit trying to put crap where it doesn't belong......even better! Quote Link to comment Share on other sites More sharing options...
unforgiven Posted February 21, 2016 Report Share Posted February 21, 2016 If you plan on changing it later a jam nut might make it easier to do.just my 2 mags. Quote Link to comment Share on other sites More sharing options...
392heminut Posted February 23, 2016 Report Share Posted February 23, 2016 (edited) Skip the blue Loctite, you use heat to get the different grades of Loctite to release so you're kind of spinning your wheels using Loctite. As Malig8r said, Rocksett is the compound most used to lock muzzle devices. It is ceramic based and sets up harder with heat, just the ticket for muzzle devices. To get it loose you just soak it in water overnight! Edited February 23, 2016 by 392heminut Quote Link to comment Share on other sites More sharing options...
MLC Posted February 23, 2016 Report Share Posted February 23, 2016 There is no real need to use anti-sieze on the the threads there. A good option would be "Rocksette" to ensure the muzzle device remains locked in the properly timed orientation. Even that is not a necessity but it is a nice to do.What do you mean by "timed"? Quote Link to comment Share on other sites More sharing options...
Malig8r Posted February 23, 2016 Report Share Posted February 23, 2016 What do you mean by "timed"? Some muzzle devices require you go orient the ports in a particular way to ensure the proper gas venting, this orientation is referred to as "timing". Quote Link to comment Share on other sites More sharing options...
MLC Posted February 23, 2016 Report Share Posted February 23, 2016 (edited) Looks like I learned something today, thanks!. Time to start doing some more research. Edited February 23, 2016 by MLC Quote Link to comment Share on other sites More sharing options...
Malig8r Posted February 23, 2016 Report Share Posted February 23, 2016 An example of this would be installing a "brake" so that the ports are NOT open to the top & bottom of the barrel as this would kick up a hell of a dust cloud when shooting from the prone. Quote Link to comment Share on other sites More sharing options...
MLC Posted February 23, 2016 Report Share Posted February 23, 2016 Gotcha. Got any tips for getting those things timed correctly? Quote Link to comment Share on other sites More sharing options...
Malig8r Posted February 23, 2016 Report Share Posted February 23, 2016 Gotcha. Got any tips for getting those things timed correctly?Not to sound snarky but, whatever device you buy should have the installation instructions included. Just follow whatever the manufacturer says. It's pretty straight forward. Quote Link to comment Share on other sites More sharing options...
MLC Posted February 23, 2016 Report Share Posted February 23, 2016 No worries, I didn't find that snarky. It's much appreciated! Quote Link to comment Share on other sites More sharing options...
ChaseFan9 Posted February 23, 2016 Report Share Posted February 23, 2016 Yeah, they'll usually come with instructions for installation, and if timing is required the company selling the brake/comp usually sells timing washers, crush washers, etc, but if you want something that looks a little cleaner check out this post:http://forum.308ar.com/topic/12552-just-timed-and-blended-a-jp-comp-for-chasefan9/ Quote Link to comment Share on other sites More sharing options...
Toolndie7 Posted February 23, 2016 Report Share Posted February 23, 2016 Yeah, they'll usually come with instructions for installation, and if timing is required the company selling the brake/comp usually sells timing washers, crush washers, etc, but if you want something that looks a little cleaner check out this post:http://forum.308ar.com/topic/12552-just-timed-and-blended-a-jp-comp-for-chasefan9/ He doesnt even have it in his hands yet and he's already bragging lol. jk Quote Link to comment Share on other sites More sharing options...
392heminut Posted February 24, 2016 Report Share Posted February 24, 2016 He doesnt even have it in his hands yet and he's already bragging lol. jkCan't say as I blame him, your work is amazing! Quote Link to comment Share on other sites More sharing options...
unforgiven Posted February 24, 2016 Report Share Posted February 24, 2016 I can't figureout what to change/break so brother toolndie can fix it.....I would love to be in the same room with ya to watch to magic.Just like I'd love to watch brother Larry work his magic on 1911's. :) Quote Link to comment Share on other sites More sharing options...
Toolndie7 Posted February 25, 2016 Report Share Posted February 25, 2016 I can't figureout what to change/break so brother toolndie can fix it.....I would love to be in the same room with ya to watch to magic.Just like I'd love to watch brother Larry work his magic on 1911's. :)it's funny you should say that, machining an 80% 1911 and custom fitting all the parts is definitely on my list! Quote Link to comment Share on other sites More sharing options...
Dane Armory Posted February 25, 2016 Report Share Posted February 25, 2016 Doing the 1911 is at the top of my list !I am collecting parts. Quote Link to comment Share on other sites More sharing options...
392heminut Posted February 25, 2016 Report Share Posted February 25, 2016 it's funny you should say that, machining an 80% 1911 and custom fitting all the parts is definitely on my list!Take pics during the machining process brother! We all want to see! Quote Link to comment Share on other sites More sharing options...
Malig8r Posted February 25, 2016 Report Share Posted February 25, 2016 ^ +1...you know how we love pics! Quote Link to comment Share on other sites More sharing options...
Toolndie7 Posted February 25, 2016 Report Share Posted February 25, 2016 (edited) Take pics during the machining process brother! We all want to see!I need to actually start buying parts first. Edited February 25, 2016 by Toolndie7 Quote Link to comment Share on other sites More sharing options...
survivalshop Posted February 25, 2016 Report Share Posted February 25, 2016 (edited) it's funny you should say that, machining an 80% 1911 and custom fitting all the parts is definitely on my list! Every time I go to get an 80% 1911 from Tactical Machining , they are out of stock , even the blem's . Edited February 25, 2016 by survivalshop Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.