cheap-bastidge Posted May 21, 2018 Report Share Posted May 21, 2018 I put together a PA10 gen 2 in .308 this spring. Started with a stripped lower, and got the parts together. Went with 20" stainless barrel 1:10 twist with mlok rail and an aftermarket stainless flash hider that will double as a stabby bit. Tomorrow my Athlon 8-34x56 scope arrives and we will be off to the range next week for the holiday weekend. I have had it out previously for break in, using my 7.62 reloads and that worked fine. (once fired lake city brass - you NEED a small base sizing die for it) , It performed well considering I was using a $10 red dot for break in. I also put a magpul SL stock on it, along with a POF 3.5 lb straight shoe drop in trigger. I am hoping this works out as good as my PSA ar-15 with the same trigger , stock, and scope which proved to be a sub MOA gun for really good price. the neat part, the stripped lower was a matched set, AR-15 and AR-10 so they have the same exact serial numbers with different prefixes. Quote Link to comment Share on other sites More sharing options...
cheap-bastidge Posted May 21, 2018 Report Share Posted May 21, 2018 Does anyone here know if there is any sort of extended bolt release that will fit the PA10 lowers? I know the BAD lever is out of the question. And, their bolt release is a proprietary one, so I am doubtful the phase 5 would work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.