98Z5V Posted April 15, 2018 Report Share Posted April 15, 2018 On 3/30/2018 at 9:59 AM, dubya said: Internal depth of my buffer tube is about 7.75" Spring wire diameter is 5/64" or 1.85mm Buffer length is 3.25" Two of my buddies ordered complete PA10 Gen 2 lowers yesterday, one a basic version and the other has the ACS stock and EPT trigger group. I'll share their specs here when they arrive. Hey, just hitting this back up again - in your pics above, you have a MagPul PRS rifle stock on the rifle... But you said the receiver extension internal depth was 7.75"-ish. You positive on that? You should be around 9 11/16" on a rifle receiver extension... So, next question... 'cause there's always a "next..." Hot did you get a PRS stock on that short receiver extension?... Quote Link to comment Share on other sites More sharing options...
bfoosh006 Posted April 15, 2018 Report Share Posted April 15, 2018 Just an FYI , the GEN III PRS stock can be mounted on all carbine ( Vltor / Armalite length and OEM AR15 buffer tubes ) and rifle length buffer tubes ... it is supplied with 2 different couplers. https://www.magpul.com/products/prs-gen3-precision-adjustable-stock Quote Link to comment Share on other sites More sharing options...
98Z5V Posted April 15, 2018 Report Share Posted April 15, 2018 ^^^ In light of that, I very well may have given him bad information!... Quote Link to comment Share on other sites More sharing options...
bfoosh006 Posted April 18, 2018 Report Share Posted April 18, 2018 On 4/15/2018 at 11:08 AM, 98Z5V said: ^^^ In light of that, I very well may have given him bad information!... No worries !! I was pleasantly surprised by the adaptability as well ! Quote Link to comment Share on other sites More sharing options...
98Z5V Posted April 19, 2018 Report Share Posted April 19, 2018 I need to get ahold of him - if he bought any wrong parts based off what I said, I'll buy them from him for what he had to pay. Don't want him to be out, based on incorrect info. Quote Link to comment Share on other sites More sharing options...
Hey-Who Posted August 30, 2018 Report Share Posted August 30, 2018 PSA has about the WORST, almost non-existent customer service known to man. And if you want something "quickly", well stay the $%^# away from PSA. Quote Link to comment Share on other sites More sharing options...
washguy Posted August 30, 2018 Report Share Posted August 30, 2018 2 hours ago, Hey-Who said: PSA has about the WORST, almost non-existent customer service known to man. And if you want something "quickly", well stay the $%^# away from PSA. Hey -Who you forgot and left out....when they do respond they give you the wrong answer/parts.....whats your problemo? Wash Quote Link to comment Share on other sites More sharing options...
mley1 Posted September 7, 2018 Report Share Posted September 7, 2018 Did the OP ever get his rifle back from PSA? Is it up and running yet? Quote Link to comment Share on other sites More sharing options...
Hey-Who Posted September 10, 2018 Report Share Posted September 10, 2018 On 8/30/2018 at 1:37 PM, washguy said: Hey -Who you forgot and left out....when they do respond they give you the wrong answer/parts.....whats your problemo? Wash Hey. I have dealt with PSA a few times and they just took forever to ship, no matter what type of item I purchased. And actually the very 1st time I ordered from them like 3 or so years ago, there was a problem with something and it took them almost 3 weeks to finally respond to my darn emails - just crazy. They do have some very good deals but man, their CS needs life support or something :) Quote Link to comment Share on other sites More sharing options...
mley1 Posted September 10, 2018 Report Share Posted September 10, 2018 6 hours ago, Hey-Who said: Hey. I have dealt with PSA a few times and they just took forever to ship, no matter what type of item I purchased. And actually the very 1st time I ordered from them like 3 or so years ago, there was a problem with something and it took them almost 3 weeks to finally respond to my darn emails - just crazy. They do have some very good deals but man, their CS needs life support or something ? I've found contacting Josiah, who has the PSA account here, is the best option. He is pretty good about getting things done for you. At least he was for me. Quote Link to comment Share on other sites More sharing options...
Bigmnt Posted April 10, 2019 Report Share Posted April 10, 2019 Boy I wish i could get Josh to help me! I bought the lower at the gun show just after Christmas and then bought the 20 inch upper about a month and a half ago. Had to wait until PSA got the lower parts kit in to put it together about a week ago. The gun would not chamber a round because the ejector rod was stuck in the bolt face. Call PSA as I bent the charge handle try to get the round out of the chamber. PSA sent me an AR15 charge handle that will not work for the .308. After and armor friend got the ejector rod port open from burs, we still could not get a live shell to come out of the chamber. My friend used a hone on the chamber but could not take the burs out of the shoulder or throat. We sent the barrel back and PSA should get it today. Sent it on my dime as trying to get a person on the phone is almost next to impossible and I have yet to have them respond to my emails. Very frustrated, Big Quote Link to comment Share on other sites More sharing options...
Armed Eye Doc Posted April 10, 2019 Report Share Posted April 10, 2019 2 hours ago, Bigmnt said: Very frustrated, Big Sorry for the frustration. Welcome to the forum. Let us know what they say. Quote Link to comment Share on other sites More sharing options...
washguy Posted April 10, 2019 Report Share Posted April 10, 2019 Big PSA suks....as you well know.... Wash Quote Link to comment Share on other sites More sharing options...
W.E.G. Posted April 10, 2019 Report Share Posted April 10, 2019 Just in case nobody noticed, this thread is over a year old. OP last posted over a year ago, and never gave any report of what ultimately happened with his rifle. Quote Link to comment Share on other sites More sharing options...
unforgiven Posted April 11, 2019 Report Share Posted April 11, 2019 It became 1 paperweight 2 prybar Quote Link to comment Share on other sites More sharing options...
98Z5V Posted April 11, 2019 Report Share Posted April 11, 2019 5 hours ago, Bigmnt said: Boy I wish i could get Josh to help me! I bought the lower at the gun show just after Christmas and then bought the 20 inch upper about a month and a half ago. Had to wait until PSA got the lower parts kit in to put it together about a week ago. The gun would not chamber a round because the ejector rod was stuck in the bolt face. Call PSA as I bent the charge handle try to get the round out of the chamber. PSA sent me an AR15 charge handle that will not work for the .308. After and armor friend got the ejector rod port open from burs, we still could not get a live shell to come out of the chamber. My friend used a hone on the chamber but could not take the burs out of the shoulder or throat. We sent the barrel back and PSA should get it today. Sent it on my dime as trying to get a person on the phone is almost next to impossible and I have yet to have them respond to my emails. Very frustrated, Big 3 hours ago, W.E.G. said: Just in case nobody noticed, this thread is over a year old. OP last posted over a year ago, and never gave any report of what ultimately happened with his rifle. Not the guy I quoted right above your quote here - he posted this 5 hours ago. He stated "Josh" but he was talking about Josiah. That's the tie-in on this thread. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.