imschur Posted April 16, 2013 Report Share Posted April 16, 2013 Some guys who struggle with this might appreciate this tool from Little Crow Gun Works. Quote Link to comment Share on other sites More sharing options...
sketch Posted April 16, 2013 Report Share Posted April 16, 2013 that's pretty trick wonder what it costs I just built my ar on Friday and used a pair of channel locks with elec. tape over the teath end as to leave no mars cost $4.50 Quote Link to comment Share on other sites More sharing options...
Zebra644 Posted April 16, 2013 Report Share Posted April 16, 2013 (edited) According to the website its $39.95 plus bucks in shipping and handling. Edited April 16, 2013 by Zebra644 Quote Link to comment Share on other sites More sharing options...
unforgiven Posted April 16, 2013 Report Share Posted April 16, 2013 Best all around tool,vice grip vice grip with a ring welded to the end.Ring is from electric motor cut off threads weld to the end.Used it for pushing in pin for bolt release.Didn't think of trigger guard but I will use it for that also.Where the end of handle [where screw part is] spot of weld there to hold it together.Lots of uses. Quote Link to comment Share on other sites More sharing options...
lasher Posted July 29, 2015 Report Share Posted July 29, 2015 anyone tried this tool for tapered sight pins? Quote Link to comment Share on other sites More sharing options...
Robocop1051 Posted July 29, 2015 Report Share Posted July 29, 2015 Aside from magic elves, nothing will replace my Brownells roll pin holder kit. http://www.brownells.com/gunsmith-tools-supplies/general-gunsmith-tools/punches/roll-pin-holders-prod781.aspx Quote Link to comment Share on other sites More sharing options...
Robocop1051 Posted July 29, 2015 Report Share Posted July 29, 2015 Best tools for the tapered pins are the Brownells tapered pin block and a BFH. Quote Link to comment Share on other sites More sharing options...
Toolndie7 Posted July 29, 2015 Report Share Posted July 29, 2015 Best all around tool,vice grip vice grip with a ring welded to the end.Ring is from electric motor cut off threads weld to the end.Used it for pushing in pin for bolt release.Didn't think of trigger guard but I will use it for that also.Where the end of handle [where screw part is] spot of weld there to hold it together.Lots of uses. Took me a minute to get what you were saying. similar to this right? Quote Link to comment Share on other sites More sharing options...
Robocop1051 Posted July 29, 2015 Report Share Posted July 29, 2015 I lost my vice grips in the backyard... found them in the edge of the lawn a year later. They look like shiit, but they work. Quote Link to comment Share on other sites More sharing options...
Malig8r Posted July 29, 2015 Report Share Posted July 29, 2015 Best tools for the tapered pins are the Brownells tapered pin block and a BFH. So if it doesn't fit you need a bigger hammer? <lmao> Quote Link to comment Share on other sites More sharing options...
Robocop1051 Posted July 29, 2015 Report Share Posted July 29, 2015 Or spit on it and try again. Quote Link to comment Share on other sites More sharing options...
EasyEJL Posted July 30, 2015 Report Share Posted July 30, 2015 Or spit on it and try again.that's what she said Quote Link to comment Share on other sites More sharing options...
Malig8r Posted July 30, 2015 Report Share Posted July 30, 2015 Or spit on it and try again. And don't forget to tell her to cup da balls <thumbsup> Quote Link to comment Share on other sites More sharing options...
agr1279 Posted July 31, 2015 Report Share Posted July 31, 2015 I bought one and I do use it. Even though lowers are plenty cheap right now and even I don't use it much it works pretty slick. Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.