bubbasks Posted January 3, 2014 Report Posted January 3, 2014 Well started coming up with a cellphone camera mount for my scope. Iscope is cool but pricey and not for my phone. So i came up with this. Just mocked up. Still need a clamp and endcap to mount the cellphone holder to. Double foamed the inside so its solid as a rock when clamped all the way closed and does 0 harm to the eyepiece. This is tonights work and result. I figure once outside maybe the cam will focus on both the reticle and beyond at the same time. Gonna take some tinkering but have a good feeling ill get it done tomorrow in time for filming fun.
bubbasks Posted January 3, 2014 Author Report Posted January 3, 2014 (edited) If it works IDGAF! haha some spray paint and it'll be all good when complete and on. Better than 100 something bucks+ on one that does the same thing. Cost to me is free-fiddy Edited January 3, 2014 by bubbasks
blue109 Posted January 3, 2014 Report Posted January 3, 2014 No doubt! I meant that as a complement :D
bubbasks Posted January 3, 2014 Author Report Posted January 3, 2014 I hate that i hafta wait till tomorrow to finish it. If it hold up stright on recoil im gonna be ecstatic
planeflyer21 Posted January 3, 2014 Report Posted January 3, 2014 Free-fiddy? Sign me up for two! :))
Dane Armory Posted January 3, 2014 Report Posted January 3, 2014 Version 2.0 Upgrade to wormgear ring clamp. Very cool setup !
bubbasks Posted January 3, 2014 Author Report Posted January 3, 2014 Version 2.0 Upgrade to wormgear ring clamp. Very cool setup ! We usta sell stainless exhaust clamps that were 3"wide at the race shop so im thinkin that would work perfect. But its a couple hose clamps till then
Dane Armory Posted January 3, 2014 Report Posted January 3, 2014 We usta sell stainless exhaust clamps that were 3"wide at the race shop so im thinkin that would work perfect. But its a couple hose clamps till thenHose clamps are perfect. I was thinking about exhaust clamps. I have a bunch of couplings of turbo intake tubing that would work also.
bubbasks Posted January 3, 2014 Author Report Posted January 3, 2014 Yeah some band clamps for turbo piping would work good. I wanna make sure it works good first then ill upgrade
Dane Armory Posted January 3, 2014 Report Posted January 3, 2014 What did you use for a phone endplate ?
bubbasks Posted January 3, 2014 Author Report Posted January 3, 2014 Pvc cap milled flat then the belt clip for my otterbox. Took the rotating clip off so its flat and gotta rivet or counter sink some holes to hold it to the endcap. Then pjone just snaps into the holder. I figure between the foam in the pipe and the otterbox it should take the recoil fine
blue109 Posted January 3, 2014 Report Posted January 3, 2014 I have some nice clamps from my old turbo beastie. What's the OD?
bubbasks Posted January 3, 2014 Author Report Posted January 3, 2014 2.25 i believe. I got some clamps here and a stainless one on the way
bubbasks Posted January 4, 2014 Author Report Posted January 4, 2014 Well finally got home to tinker and looks like iys gonna work. Prolly gonna hafta add some bracing but good enough to test
Dane Armory Posted January 4, 2014 Report Posted January 4, 2014 Version 2.0 is a lot better looking. + 1
bubbasks Posted January 4, 2014 Author Report Posted January 4, 2014 Thanks. Once done ill give it a spiffy camo job. Off to test i go!
Dane Armory Posted January 4, 2014 Report Posted January 4, 2014 Thanks. Once done ill give it a spiffy camo job. Off to test i go!post some pics from your phone.
blue109 Posted January 4, 2014 Report Posted January 4, 2014 post some pics from your phone. Paradox!!!!!
MikedaddyH Posted January 5, 2014 Report Posted January 5, 2014 Post some pics through the scope from your phone ! Fixed it.
392heminut Posted January 5, 2014 Report Posted January 5, 2014 That is a cool looking setup Bubba! <thumbsup>
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now