392heminut

Damn I'm glad my kid didn't see this back when he was riding bicycles!

I have to laugh at some of the schit the Cali politicians do there. They pass laws to try and restrict stuff and leave BIG loopholes in them. People figure out how to work around them (power to the people!) so then the dumbasses pass more laws with more loopholes! And the liberal retards keep reelecting the douchebags! <lmao>

Me either!

Nice work! <thumbsup>

Good price too! <thumbsup>

That is why I've never owned a black powder firearm! You have to clean the damn things after every shoot!

Okay. When I first looked at it I thought "Hey. that EOTech is on backwards!" <lmao>

Welcome to the forum Bigdaddy and congratulations on escaping from New York! Great post! <thumbsup>

I usually put a little crimp on mine with a Lee Factory Crimp die. I crimp for any magazine fed gun.

You guys CLEAN your guns?!!! :ugone2far: <laughs>

This is what I use for plinkers, for both 308 and 300 BLK; https://www.wideners.com/itemdetail.cfm?item_id=7238&dir=278|281|1079|1090|1727

Yup! I caught the guy putting some CCI up on the shelf two Saturdays ago and bought 500 rnds. I saw at least another 2000 rnds in the cart he stocking the shelf from. I went back about 30 minutes later to get some for my buddy and it was all gone!

HEY!!!!!!!!!!!!!!!!! We aren't done here yet! 238! <thumbsup>

This!^^^^ I think trying to shim the scope is just opening the door to other problems.

I guess my Dillon machine has spoiled me, these small lots you guys load seem strange to me. When I fire up the Dillon it's 500 rnds. or more before I'm done!

Done! <thumbsup>

Nice! That's the first time I've seen that little gizmo. <thumbsup>

That's what indicated to me it was a 308.

If your gas block rail isn't on the same plane as your upper receiver rail the 45 degree offsets won't work. If the front gas block rail is lower the front sight will end up too low and to the right to sight in.

I had a lowlife shoot two rounds of 25 auto at my patrol car while it was parked in my driveway. One left a 3" skidmark in the quarterpanel and the other didn't even hit the car. It went over the top and lodged about 1/2" into my pine front door! When we found out who did it I went HUNTING for that pieceofshitmutherfucker :bat: but he had hightailed it to California! I told the chief that if he showed back up in town and came and complained that I had beat him half to death he wasn't going to be lying! The chief's response was "Don't blame you kiddo!" <lmao> 25 ACP is just about worthless!

A NMSP buddy of mine worked an accident south of town here where a bus load of chili pickers got T-boned. He told me that it was funny as hell, every window on the side of the bus that got the impact had a grease smear on it! <laughs> LMAO at that video Jon! I gotta try that some time!

^^^^^^This!

That buffer tube will work fine on your 308 build. As for barrel length, a 16" barrel will work fine for what you're wanting to do with it. Also, the barrel length has no bearing on the type of buffer tube you can use and vice versa.

AR-15's and 308 AR's use the same buffer tubes, the 308 AR's use a shorter buffer due to the longer BCG. So you have a carbine buffer tube, the next question is, is it a mil-spec or commercial diameter?

Go ahead and use them, that won't affect anything.