Jump to content
308AR.com Community
  • Visit Aero Precision
  • Visit Brownells
  • Visit EuroOptic
  • Visit Site
  • Visit Beachin Tactical
  • Visit Rainier Arms
  • Visit Ballistic Advantage
  • Visit Palmetto State Armory
  • Visit Cabelas
  • Visit Sportsmans Guide

Sisco

Specialist
  • Posts

    6,631
  • Joined

  • Last visited

Everything posted by Sisco

  1. My next load is going to be 175gr Sierra SMK' BTHP. Most likely in Lake City Brass. Just loaded up 205 168 BTHP's with 41.2 RL15 in some Indian M80 spec brass. Winchester was managing the Indian plant at the time -1975- so the brass is pretty good quality.
  2. That is good stuff. See how mine matches up.
  3. I will do that. I was going to do water volume comparisons for 10 of each brass type, and then average out the internal volume. But this will work too. The other 2.5 pounds is going into .308.
  4. Looking for advice and opinions if this is worth doing. I have 500+ brass that is a mix of 5.56 and .223 of about 5 or 6 different manufacturers. Lake City, PMC, Squires and Bingham 5.56, and Winchester and Remington Peters 223. All the brass is going to be on it's third loading, so I don't intend to load it again after this. Some dates back to 1978 left over from my old AR180 shooting. I also have sitting in my cabinet 600 small rifle primers, 5 pounds of Reloader 15, and 600 Hornady 75 gr BTHP's. A really good bullet. I am trying to decide how to mate up all this various brass with the Hornady's in a logical manner. Option 1, I would measure the internal case volume of each brass type, and use a software program like Quickload to extrapolate the chamber pressures and performance of each case type with that bullet. Then in a quest for consistency, adjust the powder in each case type so that all types are as close as possible as far as chamber pressure. My goal would be to try to get the same performance as closely as possible from rounds loaded with different brands of brass. Option 2 Would be to just load a mild to moderate powder charge that would work in all brass with that bullet, but would have significant variables as far as chamber pressure,(although still safe) but probably very variable as to relative accuracy. And just consider it plinking and mag dump ammo. Would kinda be a waste of a really good bullet. Either option, cases will be crimped Primary rifle for use is a Colt Pre Ban Match HBAR, 1 in 7 twist. I am considering switching from a red dot on that one to a decent mid range scope. Option 1 would give me ammo I could probably upload safely to use at further distances. If I did Option 2 I would also use the ammo it in my Olympic Arms carbine with a 1 in 9 twist. Otherwise probably not. I just don't know if Option 1 would be worth all the work, and if the accuracy would justify it, What do you guys think?
  5. Thanks for doing what you did. It's not much but thanks.
  6. Help identify where your brass came from. http://cartridgecollectors.org/index.php?page=headstampcodes
  7. Excellent read. Pretty obvious like 98 says, in Aghanistan it would have been useful and life saving to have a larger, longer distance bullet. In Vietnam or the Philippines? maybe not so much.
  8. Seems to me they need a system that is mission adaptable. They have their work cut out for them with the politics of weapons procurement.
  9. Saw this a while back. https://www.thefiscaltimes.com/2017/05/08/Why-Army-Thinks-It-Needs-Bigger-Bullet
  10. I am guessing you might be geographically close. Good luck Rob.
  11. Welcome!
  12. Find a lot more with 5.56 then 7.62 brass.
  13. Sisco

    5/29/17

  14. Did not like the looks of 10 of the brass so I pitched them. Small cracks, or splits, etc. Most of it was 1975 brass left over from 98's lube test, so I was pretty picky. Had a problem with my Lee hand primer, and wedged 5 primers in sideways before I figured out the issue. (A small piece of metal wedged in the cylinder). Didn't want to mess with getting them out so I threw those 5 as well. Setting these aside for the Fall Shoot if I can make it.
  15. Awesome Wash! You and Char gotta be the Precinct favorites! Look forward to seeing the build. Why don't you etch a cupcake on the side of the lower?
  16. Nope. My Amazon Prime order of RCBS 223 small base dies showed up, along with my Lee 223 crimping die. My local hardware store didn't have a small enough bolt puller, so I have to run over to another one tomorrow. Until then it is sitting in the chest freezer. Then I will use it for back up.
  17. Translation: Everybody Sucks!
  18. http://mailchi.mp/lohmanarms/on-sale-now-bulk-22lr-1000rds-pmc-223-300-blackout-30-06-alliant-2400-and-unique-543821?e=cb6ba6e31a Had good luck with them in the past.
  19. Sisco

    5/29/17

    Amen. ??
  20. IF I was there, the last place I would be talking about it would be on a forum, especially a public forum. Then why did you buy an $899 PSA rather than a $3000 plus Daniel Defense? Never mind, that is your business.
  21. Both sides push political correctness. It just that they differ on what is "correct".
  22. Then we will treat certain Muslims differently depending on their attitude towards us. Actually that is reasonable, but always remember: the Saudis are playing both ends against the middle. They are good at it and they have always done it; going all the way back to Lawrence of Arabia. It could just as easily be Putin or Xi schmoozing with them as Trump. And the fundamental Mullahs in Pakistan still get their checks from Ridyah.
  23. Well said. Right now I see threats to our liberties from both the extreme left and the extreme right. They are just manifesting themselves differently. The left would take our personal freedoms from us. The extreme right would take our financial freedom from us. The left, stifiling unarmed political correctness, the right, 1% having 90% of our countries wealth paying no taxes on most of it. The rest of us crippled by the cost of health care, and the loss of jobs overseas and to automation. Neither one is acceptable to me.
  24. Rene, a big congratulations! Do whatever the hell you want to do from now on! You deserve it brother.
  25. Showed up today
×
×
  • Create New...