Dane Armory

Time to start using another powder. IMR 4064 is an excellent replacement. Wish. I could get more of it but can only find 1 lb bottles. Are you backorder at a major distributor or a large online store ?? HazMat does have weight limits on trucks with and without placards ! DOT certification 1 day or weekend version not too hard , I was certified for all paperwork back in 1999 to to 2004. Insurance is costly !

Lance is going... look for him there, tell him your on this forum !

Another 10mm reloader ! My favorite power is Imr 800X , more zip ,less pressure. The problem it measures like cornflakes.

Like the one in the Grilling thread !

Where do you live ??

Yeah ! And there is always Lapua. !

Extra ar 15 uppers ! ! ! They get HOT quick.

My DPMS barrels like the 150 to 168gr projo's. The 24" likes the 168gr Hornady Match bthp and Sierra Matchking 168gr hpbt over all other bullets. They group better than the 175gr projo's. For powders Hodgdon Varget and IMR 4064. I have Lee and Rcbs 308 FL dies with Factory Crimp Die they work great.

Too much rain and too many Californians have relocated there ruined it for everyone else. That is just sad. The mountains there are great. Lakes are clean and the rivers are cold.

They have been shipping out of the North Scotsdale store for about a year and a half. My back will testify to that.

Loaded up two batches of 50 each of Hornady 55gr SP w/cann over H335. 1st with 24.5gr and CCi BR-4 2nd with 24.8gr and WIN WSR Oal 2.188" to 2.196" with a light crimp..

Someone on this site modified a PMag and posted it her with pics.

I am a nut ! That leaves one nut left. The question is who the dick and who is the A-hole ? Taint that the question ?

That sucks because that means Me, Rob , Ron & Jon are all body parts below the belt.

Matt , I was making a point about Sketch's comment. No personal attack was intended. A LEO working a 12 hr shift and doing his reports at the end of his shift or the next day. Things change, memory bends the facts. Those notes are IT. No disrespect to any LEO's on the board they have a stressful job and deal with the worst people 85% of the time.Because of that reason they assume everyone is lying and must act accordingly. Here is a little fact: 40,000 new Laws kicked in on Jan 1. Good luck knowing the ones that effect you And once again, if you are involved in a shooting STFU . Talk to your lawyer first.

Thank you Drew for providing us with this forum to discuss firearms and BS about life. I came here to solve a problem with my DPMS rifle years ago and now I am helping others. I have met several members of this site and become friends with them. You guys put up with my smart ass attitude and funny stories. This is a great group of brothers who would have my back if I needed them. Mike H.

post some pics from your phone.

You have to find the brass before you can buy it. It is not cheap ! The bullets are an odd size also with a limited amount of weights to choose from. With 30 caliber it has the widest selection of bullet weights and designs on the market.

Bubba should make you prep all of it ! HA HA

Most definally not a stupid question. To some companies it is a trade secret. Different calibers, different gas length system all use different size gas port hole. Specs give ranges of sizes. It is the last process of a barrel or upper build. Too small a hole and the gun won't cycle and if it too large it will have a different set of problems. On custom builds the gas port hole would start off smal and may be increased to make the rifle function properly. So to answer that question is ... Yes , but it may not be the right size.

Version 2.0 is a lot better looking. + 1

300 wsm is a very powerful caliber ! An adjustable gas block or carrier weights would allow a higherpower factor of the loads. The way my rifle is setup now limits the ammo I use. The next barrel I would drill a smaller gas port hole and all will be good !

Loaded up 20 rounds of Hornady 55gr fmjbt w/cann to finish off the box.H335 and cci primers. Had two 50gr spitzers so I loaded those also. Did those before breakfast.

What did you use for a phone endplate ?

Hose clamps are perfect. I was thinking about exhaust clamps. I have a bunch of couplings of turbo intake tubing that would work also.