Albroswift

I like the KAK, running them in 3 BCG's so far. https://www.kakindustry.com/kak-bcg-ejector-308 Sprinco has great springs. Also, after loosing a couple I bought the tool https://www.brownells.com/gunsmith-tools-supplies/rifle-tools/bolt-tools/ejector-tools/308-ar-bolt-ejector-tool-prod72380.aspx

You will find a use for the spring and tube when you build your next small frame AR! Pretty sure no one has found a good use for a 2-1/2" 3 oz buffer yet. Maybe we should have a contest.

is this sr25 or armalite? I had a link to the low dpms pattern if you want me to dig it up? DPMS low profile if you have a chance. No hurry, already spent too much this week!

Hey, thanks. Been down the Tiger rock path, ever try to order anything from them? I gave up. Site seems to be set up for someone with a dealer account, can't get anyone on the phone. ABC doesn't seem to have one for 308, maybe I'm missing something. I love the JL Billet but don't want to fuch up such a nice piece. Looking for cheap to practice on. Still looking....

Yes, as in most semis, pistols and long guns, pull the trigger all the way through, release until reset is felt, should be right at the breaking point for follow up shot. Concentration on the reset. This is the first trigger I can remember that pushes my finger off the second stage break point, quite noticeable. There was a second spring in the package but the instructions said that was to increase trigger pull.

Just tried one out this weekend, I like the break but on the reset the trigger bounces my finger back well into the 1st stage zone, I have a CMC 2lb/2lb 2 stage on another build that resets right at the 2nd stage break point. Maybe need a lighter trigger spring?

Welcome from WA Can't post to many pictures! Al

And well on my way to use that last 12.5 Sig barrel Free shipping no tax, just the way I like it.

Good price, don't need one right away so on the notification list. Thanks. Now if I could find a 5.6oz 2-1/2" buffer on the cheap things would be groovy.

Paying back for all the great help here!

All the old mixed brass ran awesome except some S&B, primers seemed to seat a little bit high, not so high I would notice but the bolt noticed when it almost rotated all the way into battery but instead jammed tight on a couple. Only way to tell the difference was to put them in a case gauge and use a straight edge. Culled out about 10-15, all S&B. Anyway, some data comparing progressive weighed loads in mixed 3 times + fired brass vs single headstamp low use hand trickled loads. Progressive press weighed loads, worn mixed brass, 42.4 AR-Comp Fed primers 150 gr FMJ BT 12.5" barrel Single headstamp (Starline) 1 or 2 times fired max, trickled loads 42.4 AR-Comp Fed primers 150 gr Hornady SST, 12.5" barrel Red dot optics, couldn't tell the difference at 100 yard accuracy wise, budget loads perfect for the gravel pit. Barrel length data: 12.5" Sig barrel 150 SSTs 230 FPS +/- slower then the 150 SSTs out of the Anderson 18" barrel

So JBO is the brand? Can't find it on their site. Seekins and Odin start $50-$60

Drilled it 5/64 .078 Seekins AGB Have the Superlative Arms on the Anderson AM10 but don't use the bleed off feature so saved 50 bucks this time.

Killer deal. They have one less then a minute ago. So is there a better deal out there besides 65 bucks for a KVP 5.6 oz 2-1/2" buffer?

Yep, as far as I understand WA Regs, no SBR's. Tailhooks and SBA's fine. Shot the 308 with the Tailhook Mod 2 brace (7" tube), 5.6 oz KVP 2.5" buffer, orange Sprinco spring this morning. First mag ran great but brass at 1-2:00. 1/2 turn in on the AGB and 3-4:00 ejection pattern. Ran out a few of mags ea of 180 gr and 150 gr ammo, 100% reliable. not as much recoil as I was expecting. I like the SBA's because you can use a AR10 length tube, but kind of flimsy. The Tailhook is stiffer, proprietary 7" tube, but as long as the 308 will run reliably with the short tube, is a great adjustable brace. SBA3s are going for around $125, Tailhooks $150.

Yes, I am aware. Guys at the police range shooting them with bipods and high power scopes. But no SBR's in WA, stamp or not. Go figure... Also, looked at the box, it's a Tailhook Mod 2, not mod 1. Telescoping. I'll dig it out tomorrow and see how the 308 runs with the 7" tube. Take some photos.

I was trying to stay within the spirit of the regulations. 😎 (No un-coded messages on compromised frequencies)

I was trying to stay within the spirit of the regulations. 😎

I know. I'll get some at the range.

Swapped out he SBA3 with a Tailhook Mod 1 on the 12.5 308 last night. Took the long bumper off the KVP 5.6 oz and restored it to the 2.5" configuration for the shorter tube. Orange Sprinco. Flipped the brace open, inserted arm and grabbed the pistol grip. I shoot left handed, muzzle points about 45 degrees to the right and no way to engage the red dot. So figured what the heck, tried it right handed. points a little straighter but still no way to see the red dot. Really cool device except for the primary function doesn't work (for me). It does work nicely for cheek or shoulder weld. Going to run it this weekend just to see if that spring/ buffer/ tube configuration flies, then maybe back to the SBA3/ tubs flatwire/AR10 tube. FWIW, the SBA3 kind of works when on the arm, but strap would only work for someone with a 1-1/4" arm diameter.

Having a tough time tracking this one down, looking for a 9-10" raw handguard. found a 12" at outdoor tactical supplier, that seems to be about it. really would like 9"-10" M-lock or Key fine. Any ideas?

Did it again, boxes sticking out of my mailbox. AMT upper and lower 308. Must be a new mail carrier. Fortunately got a delivery notification email from one of the vendors.

Not following, small frame test fit for large frame?

Faxon 14.5" Pinned 3 port pencil barrel, sweet. Any thinner you would see through to the rifling. Right to Bear $189 no shipping no tax. Idiot postman delivered it 8:00 last night, placed it in my STREETSIDE mailbox sticking out 6" with the door down because it was longer then my mailbox and he was too lazy to walk 40' and ring my doorbell or leave it on the porch. Saw it sticking out this morning leaving for work. Best delivery since Anderson sent my AM10 back standard shipping no signature, got home and it was leaning against the front door. At least they left it on the front porch...

Looking at the data again and racking my brain, I used some new brass that I pulled the bullets out of and dumped the powder, and then reloaded without re-sizing the neck. might have been the first 15 or 20 loads. The reduced RL-7 from a couple weeks ago didn't exhibit anything like this.