shooterrex

That VG6 muzzle break is for 6.5mm not 308. LaRue MBT-2 Trigger is good and less than $100.00 shipped.

Welcome from Ky

My dad has a Winchester 94 in 45 colt. Recoil is not bad at all till we get to some handloads or the Corbon +P 300 gr stuff. He has killed deer and hogs with it. At 50 yds or less the 250gr lead cowboy loads should knock a deer over and not kick much at all. Till my Dad shot some of those corbon's he didn't think the rifle kicked at all. 300 gr at 1400fps.

Measured the other barrel I need 11 1/8" For the second barrel.

Another organisation has picked up the cause. DAV I think. Rolling Thunder still lives.

I'm not in a big hurry. I do have the upper,rail,and adjustable gas block. No lower yet but I do have everything else to comepleat another pistol. If we can get a group buy on these tubes and save some money that would be good.

Welcome from Ky.

Welcome from Ky

I need to order a gas tube for my 2nd barrel. Anyone else need to order any? If we order 3 they are only $20 ea.

Welcome from Ky

Leopold 1.5x4 firedot, 20moa Nikon mount, 2 gun cases, barrel nut wrench I didn't have, forward assist plugs, linear comps for 308, new phone cables,,case etc. Been an expensive week.

There is about a dozen of us that try and make it every year. Sometimes life gets in the way. I think l my oldest shirt is from 2006.

Welcome from Ky

Welcome from Ky

Does she think your tractor is sexy?? Heal up I had a bad bike wreck spring of 2003. Still riding but not around big towns and traffic except for rolling thunder in D.C.

Nice. If you do switch to 308 someone around here will need a creadmore barrel.

Hope this works. I have old 1st gen night vision that the case is tacky.

You're right that one doesn't have the dot. Place in Florida has 7 of them @$298.

Found the mount on eBay for 41.00 The scope will have to wait till next week. Optics Planet has it for 289.00

Sighted in w/Hornady Black 123's. 195 yds 3 shot group. Mil spec trigger and old Bushnell sportview. Shooting bag for a rest over the hood of my jeep. LaRue MBT-2 on the way. Not sure what glass I will end up with. This is what I will deer hunt with this fall.

There are creadmore bolts with smaller diameter firing pins w/a corsponding smaller hole in the bolt face. That will likely solve your problem. PSA really doesnt have this larger platform quite right yet.

Welcome from Ky

An actual Armalite carbine gas tube will be the proper length. When I changed over to a colapasable stock I bought the Armalite buffer tube ,spring, and buffer from them. PSA still doesn't use the right weight buffer and spring.

First off is it an A2 rifle stock or collapsible stock. Did you have the bolt carrier almost dripping with lube? How far does the gas tube go into the upper? Does it go to the middle of the cam pin cutout or is it short of the middle of the cam pin cutout? PSA will fix it eventually but you can have it running right quicker with a few parts. Mine needed a longer gas tube. Pic of where the gas tube should end.