98Z5V

Almost forgot this - KNS Precision released a rail mount for a GoPro cam. Fits all three models of the GoPro out there. No pics on their website yet, and I didn't get one there. Damnit.

MagLula loader/unloader for 308 mags - DPMS/SR-25 version, AR-10 version, RRA version, M1A version. All bases covered. Lancer L7 mags - those damn things are so sweet. ProMag 308 mags in 20, 30 and 40 rounders for the SR-25/DPMS platforms. All kinds of new rails. There was alot there for 308 ARs.

Drew, I did get the email, and I got down there to see Guy almost directly. He had TWO left, and one of those was the paint-marked demo on his table. I got the other one. <thumbsup> The Elite bipod is worth every penny, IMHO. I'm not kidding. That rotational bearing setup is badass. That feature, plus the materials it's made from - that's what makes it what it is. You see that thing in person, and you understand the cost of it right away - seriously. I will be getting one of those.

http://www.foxnews.com/world/2014/01/21/us-russian-forces-hunt-deadly-jihadist-widow-feared-inside-olympic-zone/ Terrorism at the Olympics.

Smart as hell. <thumbsup>

5.56mm is your answer, brother. Put together some SMK 77s or some Hornady 75 BTHPs, get them to 2750 fps, and that's all you'll need. Wolves won't stand a chance. Ultimately, I'd tell you to load up some Barnes 70gr TSX and get it to 2700. That's just not an option these days... Got 'em. Call me, brother. <thumbsup>

Phase 5 EBR V2. You need to check if it will fit your rifle. That's your only hope. Do some research. http://www.phase5tactical.com/products/308-dpms-type/extended-bolt-release-v2308-ebrv2308

Every once in awhile, I feel the urge to do this... Click it: http://lmgtfy.com/?q=primaryweapons.com

I STILL crack up when I see that... <laughs> <lmao>

$hit, he needs some warnings. Just Because. :banana: I hardly do anything around here, and I've got FOUR. Thank you, Rob. :fawkdance:

I fondled several of them, showing Dawn Marie the beauty of the 51T Brakeout, and those cans. I even tried to apply my own rule of "If I Lick It, Then It Is MINE," but they STILL wouldn't let me have them... Some HazMat Dude came along shortly and wiped them all down... :'(

There are bolt dimensions/specs posted on this site, as we've had a member (Robocop) send a bolt to a local manufacturer, whom in turn posted those specs in order to manufacture his own bolts. Rob knows the post - he should be able to find it and link it up. Or raise it from the dead, into an active topic.

Read "Bravo 2 Zero" by Andy McNab. British SAS in the first Gulf War. Compromised by herders. Tell me what you think after that. Think about this account. Thoughtfully. Tell me what you think. Now, more to think about... I've been in Afghanistan, up in the mountains. 5-man team plus an interpreter added to my team. We were compromised by goat herders, and their damn goats... We didn't shoot anybody over that. There wasn't a need. Then. Circumstances dictate.

Watch it again, and look for this face... (right, in pic) These are the real guys... (right, in pic)

Here's the SM, stripped down again, in order to put in the 14.25:1 piston... Some other stuff I've worked with in the past - YFZ-450 Turbo: If it's got spark plugs, I can make it faster. I can get your weedeater to cut down trees, brother... <lmao> When you're ready for wet-shot Nitrous, just give me a shout. <thumbsup> <thumbsup>

Since we're on the subject of "All Things Badass" here, I might as well toss in a couple pics of the Jeep, and the Beer Fridge, too.

It's bad, but it can't whoop the Big CR... That thing is PURE EVIL.

Some of the head porting - this is what I used to do... The bike:

Watched is last night. Fukkin good movie. Marcus is in the movie, numerous times, all over the place. Not the actor. Marcus Luttrell.

More than that, brother. Did do the Yosh RS-3 full exhaust (stock headpipe is WAY too small in diameter). Ported the living hell out of the head. 3x3 hole in the top of the airbox, NoToil thin Supermoto foam filter, FCR-39 carb conversion, Athena 434 jug with a 14.25:1 compression piston in it, original Hotcams (more lift than the new ones, more duration, no decomp device on the exhaust cam). Manual decomp added from a DRZ-kick bike. Chucked the stock weakass battery and made a Yuasa YTZ-10S fit in the modded battery box. I've done $hit to it that Yoshimura can't replicate. 3rd gear low-RPM roll-on wheelies are effortless. You can't keep it down in 1st. Slight tug in 4th, and it comes right up. Have to run 104 octane, minimum, to avoid detonation. It's ridiculous. Next up is a 5mil stroke. Bring it up to a 470. :hethan: <laughs>

For the 300 WinMag, I say build it. No joke. Well, build it, in a sense. Pick up a Rem 700 heavy barrel in that caliber (the Rem Model # 5718), throw the stock away, and mount that bastard in a McRee long action chassis. There's your base rifle. Done. Add what you need as the rifle progresses. Save $795 for the bipod. Don't ask me now, just save that amount, and let me know when you're ready for it. <thumbsup> Tell ya, I'm seriously looking at the Savage BA110. Or the Rem 5718, as you can tell... <lmao>

Damn, that 14.5" is incredibly nice, Goof. Awesome rifle.

That thing is gonna put your eye out!!! <lmao>

SUNDAY! SUNDAY!! SUNDAY!!! ONE DAY ONLY!!! <lmao> CG Range on SUNDAY! Then, it SHALL be present at the wedding. <thumbsup> SS, I'm REALLY liking this stock so far - I've had a year to handle the damn thing. I think I'll like it shooting, especially with that scope setup. I'll definitely give feedback, though, post-shoot. I'll let ya know on SUNDAY!... :banana: I'm really curious to see how it functions, since it's carbine gas on a 16" 300BLK, with rifle buffer system. That might be too much buffer weight... Yeah, this bastard will be a great host for the SDN-6, no doubt.

SS, I'm trying to get ahold of the new ProMag 308 mags - I want you to run them in that CMMG and see if they work. <thumbsup>