98Z5V

Smith & Wesson is OUT. Leaving Springfield, Mass, where they've been since 1852. Smith & Wesson to move headquarters to Tennessee over Massachusetts' proposed gun legislation Legislation would impact 60% of gun maker's revenue https://www.foxbusiness.com/markets/smith-wesson-headquarters-tennessee-gun-legislation Gun maker Smith & Wesson Brands Inc. will relocate its headquarters to Tennessee next year due to proposed firearms legislation in its home state of Massachusetts. The legislation, if enacted, would prevent Smith & Wesson from manufacturing products that accounted for more than 60% of its revenue last year. "These bills would prevent Smith & Wesson from manufacturing firearms that are legal in almost every state in America and that are safely used by tens of millions of law-abiding citizens every day exercising their Constitutional 2nd Amendment rights," Smith & Wesson CEO Mark Smith said in a statement. Smith & Wesson has been located in Springfield, Massachusetts, since being incorporated in 1852. That facility will remain operational, but others in Connecticut and Missouri will close as part of the consolidation. Upward of 750 jobs will move from those facilities to the new headquarters in Maryville, Tennessee. Employees who cannot make the move will be offered enhanced severance and job placement services. "This has been an extremely difficult and emotional decision for us, but after an exhaustive and thorough analysis, for the continued health and strength of our iconic company, we feel that we have been left with no other alternative," Smith said.

This entire post of yours is better served, in it's own thread - not piggy-backed off this thread here. I highly suggest that you start your own thread on this - with all the information that you put up here, in this one. Additionally, hit up the Intro Section, and tell us about yourself. Free information only goes so far, for first-time posters. Become one with the community.

The steel cased. Get rid of it. There's alot more that needs addressed. New gun? Old gun? First shots fired, and you used the steel cased? You picked up a "DPMS Oracle" - but was it a factory built gun, or something that someone built? Here's the kind of information that we need, to solve this over the internet. And get rid of the steel cased ammo, whilst trying to work this problem out. Check it:

The Brownells version is a good piece. It's a fraction of what the Geissele version costs, and does the exact same job. You can't go wrong with it.

I've been a trigger puller since I was a kid, then when I (also) was in the military in the '80s, '90s, and 2000s... I do more than sit on a couch and only shoot video games. As a Retired Veteran, I'm ashamed that there were spinless little whiny assheads like you IN the military. I woulda Chaptered your sorry ass out.

Not on ARs - Large Frame or Small Frame. Because, they both use the same recoil-system dimensions, and have the same lengths of pull...

Fuckin' SAVAGES, I'm sayin'. You guys don't need any enemies, way you treat yourselves...

Indeed, we're seeing alot of that from you here, thus far.

Post results. Thanks in advance. P.S. Pics make or break it. Prove it with pics.

Please get into more detail on this - since making an Intro Post is so way beyond you. If I offended you with that, then just make an Intro Thread. Here's where you do it: Go get busy now... https://forum.308ar.com/forum/22-introductions/ Thanks in advance. Please don't fuk it up. We're rooting for you.

NO KIDDING! You completely FORGOT about Google, and all the other search engines, too - and you thought that asking US this question was the best source of you time. Search some shiit out, man, and stop asking dumbass questions. WTF are you thinking we are here - online LIVE inventory of everything out there? You need to get off YOUR OWN ASS and do YOUR OWN RESEARCH for some of your dumbass questions that you pose upon us. YOU are YOUR ANSWER. Not us. Here's the way I see you, and what we're trying to do for you. Here's how you really are, though, and it's fuckin' SAD. This is YOU...

Minute-of-Man at 300 yards, all day long. That's been proven in combat for 50 years +...

Well done, brother.

Read the reviews on the LaRue website. You can't grasp what we're telling you, so go to the LaRue website, and read the reviews on their mounts, right there. Apparently, we can't communicate well here, and we're not getting the point across - or you're not understanding it. Something is going on. If you want "return-to-zero" information on LaRue mounts, and how accurate that return to zero is, then I can only suggest you go to their own website, and search their reviews. How hard is that - for you, it's pretty fucking painful. You kinda "refuse to understand." I'll give you a head-start on this. Hit this link. https://www.larue.com/ I'll go even further - because it seems that you need that. Here's the link to the scope mounts. Do me a favor - pick ANY scope mount that they make, and just check the reviews... Apparently, the reviews that WE GIVE YOU, spoon-fed, thus far... are not enough for you. LaRue only makes 21 different scope mounts. They're ALL in this link, that I've gifted to you - because RESEARCH = HARD. Pick any mount you want in there, read reviews, formulate your own opinion. It's not that difficult. Well, it's not difficult for us, so I don't understand why it's kicking your ass so bad. My observation, here, on what's gon on in this thread. You make an easy job hard. That's just what you do. Here's your information - your job now is... GO DIG! Good luck to you. https://www.larue.com/category/larue-mounts/scope-mounts/riflescope-mounts/

It's absolutely CRAZY AS FUK every single month, brother. NUTS. That's what make it so cool to shoot, every month.

I do this about twice weekly, with the shiit that I get myself into. This past month-ish it's been DEEP... I might be in trouble. We'll see how it shakes out.

Yeah there was - and the result was... ARMS sucks. The lawsuit from ARMS TO LaRue didn't work out so well for ARMS. Mark LaRue made it a game - break the levers off your ARMS mount, and send it to him, and he'd give you a LaRue mount for it. Free. He took all the broken ARMS mounts to SHOT Show, and put them on display at his booth. Now, your questions about the best mount is... What? What else do you need to see? Need more info on the ARMS mounts over the LaRue mounts, for any other information?... I'm confused about why you're confused, over the best return-to-zero mount out there. Maybe I'm not understanding, or I can't smell what you're spreading here...

I'm glad you responded, Larry, so I didn't have to. My answer was gonna be a little different. Maybe not as kind as yours.

That thing is legit - one at the gun shop, and it gets used ALOT. For upper work, I'm stuck on Reaction Rods. Nothing better, IMHO.

Been WAITING in there, so I can give you a Pants-Down Hug, brother!

Second for LaRue mounts. They're better than the ARMS mounts anyway, and that goes back more than 10 years now. It was quite the battle, back in the day.

No guarantee - but a possibility...

That was a link to everything-Pro Mag that Brownells has - but not to a specific tool. Which one are you talking about?

I cure plastic at 170* for 3 hours, brother. Magpul handgrips , magazines and stocks, that sort of thing. This one that you have would fall right in there.

Hang around, they might pop up. I missed 3 sales here throughout the years (over 10 years here), but finally landed one a few years ago, on my 4th attempt.