98Z5V

Shiit starts getting tricky when you're messing around with 16" Rifle Gas - there's not alot of dwell time to play around with... Here's a 22 ARC in that config... 12.5" Midlength Gas is the exact same rodeo - another 22 ARC with 0.750" journal...

That's an impressive amount of research that you did, just to make that post, and I commend you. I'll get my opinion in here either tomorrow or Friday, depending on the time I have. I'll give you the exact port diameter that you'll need for either gas block journal size, man. I base all my 6.5 Creed suggestions from my two 20" Rifle Gas 0.750 journal .260 Rem guns. Same bullet diameter, same exact gas needed. Great job on your recoil system - that's exactly what you need.

I haven't yet, but I'll definitely make it a point to get a pound for testing.

Ballistic Advantage just dropped a 16" RIFLE gas 22 ARC barrel, SPR profile, 0.750" gas block journal. Gas port measures 0.096". This thing is gonna rock... It's already a complete upper.

I would HIGHLY SUGGEST crimping any ammo that you have that goes through an AR Gas Gun, no matter what anyone else "states as fact" anywhere. Loaded up a 100 round drum of 5.56 to run in a bump-stock gun, and it jammed up pretty good - ALL the next rounds that were coming up that feed are were setback in the brass. The owner of the gun didn't crimp them. I'm glad the gun jammed. Those setbacks could have been really, really bad, really, really fast... Crimp your loads if they're going through an AR Gas Gun. NF1E - your practices will catch up with you sometime, and I hope it works out well, and healthy, with no long-term damage.

I did that on purpose...

Those two platforms work well together. Well, depending on that term "salvage..."

Please explain what that does for the situation that he described. Thanks in advance.

They cut the shiit out of an AR-10 type lower, to make a DPMS type upper fit. That's just pure ignorance. My $0.02.

Separate them off to the side, for the crimping process, and reset your crimp die just for them - get the right crimp on them. They'll stretch, with firing. They'll end up the same size/length as the rest, pretty quick. Couple of firings. Just don't run them with the rest of the brass, through the crimper, or they'll have a very light (if at all) crimp on them. Not good, light crimps on a semi-auto. My $0.02.

I finally saw this one, you MFer... I'm glad I didn't see it before last week...

The gun details, and everything about it -just like we have to "interrogate" everyone all the time, about their certain situation... You know the drill by now. You ain't new. Get rid of the crush washer, first, and buy some AccuWashers and remount the suppressor host. The crush washer has it on their sideways, because it didn't crush straight. That will solve 90% of this problem. https://precisionarmament.com/accu-washer-muzzle-device-alignment-system/

@Armed Eye Doc, this is such a badass pic, brother. Wow...

You can have as many as you want - just keep coming back, and taking them away...

NECROpost, BAD! 12 years later. But good information, wrapped up into one short video. The topic is .223 Rem vs. 5.56 NATO. The guy nails it, and we've preached it for years. 5.56 NATO is hotter than .223 Rem. Keep in mind, like stated earlier. The big ones are the opposite. Like stated earlier. Check it.

It's Tulsi Gabbard... Check it out...

Gawd Dayum, I love this stuff! Awesome work, brother!

^^^ Good point. Neil, how was the suppressor host installed on the barrel? Crush washer? Shims? If it was crush washer, get rid of that thing, and used some 5/8 AccuWashers to mount the suppressor host.

Scope details, scope mount details, and ammo details.

Yeah, okay. An hour prior...

Okay - you can have an Honorable Mention for the 4 of 5, which is an 80% effort...

I'm just gonna get this out of the way right now, because there's gonna be some bitching from (insert name here). @Magwa cold-bored the 2k. More impressive than that, he backed it up on his second shot, and hit the 2k AGAIN, 4" away from his first impact. There's only ONE OTHER GUY that cold-bored a long distance shot this weekend. The Mile. Then, he backed it up and hit his second shot... I'm just sayin'... Just TWO DUDES that went back-to-back on cold-bores, on distance. 2 hits, 2 shots. That's 100% effective, for the record...

@Cunuckgaucho, @Armed Eye Doc, @Magwa, @JBMatt, @Matt.Cross, @Camotruck, @shooterrex - and anyone else I didn't tag - post your AAR pics and info in here, for public info...

Smaller, Epic, Better. I'm gonna open up with the most EPIC FUKCING MOMENT of the weekend. @Magwa, first shot of the morning on the 2k, cold gun, first round, perfect impact. He followed that up, with a second one, 4" away - at 2,000 yards - and the pics will come out. Enjoy... The only other thing I'm gonna say right now is this... @Armed Eye Doc brought more gifts this year, in the form of beer coozies. And they're badass. Look close at the first pic, compared to the second pic, and it'll tell you the story. @Matt.Cross is the designated story-teller for the full beans on the whole Long Distance deal, and he'll get to it soon...