Dane Armory Posted March 28, 2015 Report Posted March 28, 2015 Ok so here is the delima, I want to find out what different manufactures slides will fit on a 1911 or 2011 frame ? I.E. Para Ordinance P12 , P14 , P16 slide on a STI 2011 frame ? Para Ordinance Elite slide on a 1911 frame ? Then : Glock sllides ? {Lone Wolf} CZ-75 slides ? {Witness , XD , XDM , XDS , Kahr } Beretta slides ? Sig slides? Need side by side comparisons. TIA
planeflyer21 Posted March 28, 2015 Report Posted March 28, 2015 What are you up to, Crazy Genius? Hhmmm... <dontknow> Just to clarify, you want to see how many different makes will fit squarely upon a 1911 frame? That sounds like a project I can look into.
Dane Armory Posted March 28, 2015 Author Report Posted March 28, 2015 Makes and models ! Like a M92 slide on a Caspian double stack frame ? OR a Glock slide on a STI frame. OR 1911 slide on a Glock frame.
MikedaddyH Posted March 29, 2015 Report Posted March 29, 2015 I found a Para P16 slide installed on a1911 frame ,its on the 1911 forum in the Para Ordnance section.
blue109 Posted March 29, 2015 Report Posted March 29, 2015 crazy ish just happened. true story. I dreamed I had a glock slide in my Walther and I was going to post it in here. time to put the internet away for a while.
survivalshop Posted March 30, 2015 Report Posted March 30, 2015 (edited) That's a tall order of info your looking for . I know I have always wanted a Cougar ( Colt Python Barrel, usually a 4",on a Ruger Security Six frame ), but mixing blow back operated slides on different manufactures frames would be a real challenge . Too many variables in the way Manufacturers set their particular actions & or Safety's , triggers & its Mechanisms up , not to mention the dimensional differences of them . It can be done , but why ? It could be very dangerous . Edited March 30, 2015 by survivalshop
98Z5V Posted March 31, 2015 Report Posted March 31, 2015 I know I have always wanted a Cougar....... ............ It could be very dangerous . I'm always on the lookout for them, too - for the same reason. :hethan: <hump> :banana:
Dane Armory Posted March 31, 2015 Author Report Posted March 31, 2015 I'm always on the lookout for them, too - for the same reason. :hethan: :banana:Found this with a spotting scope... It was in its natural environment in North Scottsdale resting after a big meal.
shibiwan Posted March 31, 2015 Report Posted March 31, 2015 Found this with a spotting scope... It was in its natural environment in North Scottsdale resting after a big meal. Ah... must have had its fill of meat...
Dane Armory Posted March 31, 2015 Author Report Posted March 31, 2015 Looks like. P-14 slide will fit a 1911 frame with a extractor , firing pin and a couple other smalls parts. Should fit on a caspian double stack and STI 2011 also.
98Z5V Posted April 1, 2015 Report Posted April 1, 2015 Mike, let's just get to it already... :wtf: are you planning on building?!...
AngelDeVille Posted April 2, 2015 Report Posted April 2, 2015 He's building a 1911 that shoots .556, .762 and .45 acp. Without changing barrels OR magazines!
98Z5V Posted April 2, 2015 Report Posted April 2, 2015 He text me the answer - this is gonna be sWEEEEEt!!! :hethan:
survivalshop Posted April 2, 2015 Report Posted April 2, 2015 If I think you are doing , what I think you are doing , just buy a XDM 45. <lmao>
Dane Armory Posted April 2, 2015 Author Report Posted April 2, 2015 If I think you are doing , what I think you are doing , just buy a XDM 45. <lmao>Yeap but Sti frames looks so much better !
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now