Jerry Posted October 20, 2016 Report Posted October 20, 2016 i have a DPMS oracle 308. i want to put a 13.8 troy industries handguard quad rail on it. which low profile gas block do I need. thanks
washguy Posted October 20, 2016 Report Posted October 20, 2016 Jerry I like this one from Kak...ive never used this one from Kak directly but they make them for a lot of vendors....so I just might have a Kak on mine and not know it Wash 22 bills why not? Heres someones review " This is a very nice low profile gas block. Fit and finish is very nice. Set screws are flush when installed in barrel with matching divots. Lots of clearance for even small diameter free float tubes such as the Troy Alpha series. I will be using this block on most of my future builds. Overall a GREAT value! (Posted on 9/5/16)" https://www.kakindustry.com/review/product/list/id/62/category/12/
98Z5V Posted October 20, 2016 Report Posted October 20, 2016 Wash, you're sure pushing a lot of KAK these days...
blue109 Posted October 20, 2016 Report Posted October 20, 2016 Better to be the pusher than the puller
washguy Posted October 20, 2016 Report Posted October 20, 2016 33 minutes ago, 98Z5V said: Wash, you're sure pushing a lot of KAK these days... For Kak's sake ... geeeez Wash
MikedaddyH Posted October 20, 2016 Report Posted October 20, 2016 3 minutes ago, washguy said: For Kak's sake ... geeeez Wash Those KAK products don't sell themselves ! What are you getting from them ,Wash ?
shepp Posted October 20, 2016 Report Posted October 20, 2016 I call Bret Farve "the Mississippi dong slinger" think wash's new title should be "the Texas KAK pusher"
washguy Posted October 20, 2016 Report Posted October 20, 2016 They promised me a new Larue...my choice of model and caliber Wash
washguy Posted October 20, 2016 Report Posted October 20, 2016 They already gave me a jeep just for signing up Wash
planeflyer21 Posted October 20, 2016 Report Posted October 20, 2016 1 hour ago, washguy said: They already gave me a jeep just for signing up Wash In two-tone KAKhi too!
funny_spartan Posted May 11, 2017 Report Posted May 11, 2017 Alright ....KAK pushers. Didn't know if commenting on old threads were a no-no but I figured it was better than starting a new one over the same thing. Anyways im guessing ill have to get a new tube for a low profile gas block. Would this https://www.kakindustry.com/review/product/list/id/114/ work for an Oracle with this http://slrrifleworks.com/index.php?route=product/product&path=66_107_147_113&product_id=419? (using their gas block of course)
washguy Posted May 11, 2017 Report Posted May 11, 2017 (edited) On 10/20/2016 at 1:32 PM, washguy said: For Kak's sake ... geeeez Wash Good stuff there heavy buffer is very nice .....lemme go look at the Kak Wash Wouldn't see why it wouldn't work....get ya a heavy buffer while your shopping https://www.kakindustry.com/lr-308-parts/308-lower-parts/lr308-carbine-buffer-heavy Edited May 11, 2017 by washguy
392heminut Posted May 12, 2017 Report Posted May 12, 2017 15 hours ago, funny_spartan said: Alright ....KAK pushers. Didn't know if commenting on old threads were a no-no but I figured it was better than starting a new one over the same thing. Anyways im guessing ill have to get a new tube for a low profile gas block. Your old tube should work just fine unless you're changing the barrel to one with a different length gas system. Just drive out the roll pin and reuse it in the new gas block.
funny_spartan Posted May 12, 2017 Report Posted May 12, 2017 Alright thanks gentleman. Looks like I'll be having a bunch of kaks on my rifle now
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now