98Z5V

Brass-cased M80 ball. Or anything similar.

Watch those taper pins. They're FUN!!!

Good shootin'!!! I've never had an accuracy issue with Barnes TSX (non-tipped), and the TTSX is a little better at distance. Barnes designed this stuff to be as accurate as Match projectiles from other manufacturers. I've never seen any results that would indicate that it doesn't measure up. My best examples are all in 5.56. 70gr TSX vs Hornady 75gr HPBT Match vs Sierra 77gr SMK. The Hornady 75s are a little more accurate than the Sierra 77s, just ever so slightly, and the 70 TSX hangs right there with both of them. Be careful if you start handloading these things - they're longer than other projectiles of the same weight. That reduces case capacity, and changes pressures. You wouldn't just toss a 168 TTSX right on top of your favorite recipe for a Sierra 168gr HPBT... Here's the best example I can show you:

It's pretty straightforward. I don't know if either one of these will be any good, but it's worth a look...

Found reference that he's a 50% owner. I hope his wife isn't the other 50%. If she's not, I'll bet that whomever the other 50% IS will have his a$s out quick.

I'm not disappointed in Recoil - they've been through this before. I think it was Issue #2, that CEO was put out on his a$s, and Ian Harrison took over...

Here's a report on his response to that, from Recoil. They reached out to ask him WTF... http://www.recoilweb.com/official-statement-from-x-products-ceo-james-malarkey-in-response-to-controversy-135210.html

That fucker went on to say that the Clinton AWB worked, because there were only 2 mass shootings during that timeframe... I'm not going to run out there and sell my Can Cannon - but I wouldn't buy another one, and won't buy a 7.62 version of it. Hopefully, some stand-up company will make some cool devices for it. Fuk, I liked that grappling hook.

Great to see ya, Pappy! Right on, man - that's some sweet looking hardware!

I gotta pass on it right now, just too much going on. Up for grabs for someone lucky - I do like it.

SSA-E has a pound less pull, overall. Compares very well with the SSA, though. Just as smooth, breaks similar. However, it's $99 now, $125 regular, and the SSA is way over that. It's well worth it.

Pictures are required in this section, of the actual item for sale. Not something looked up from the world wide web. Attach a picture of the item you are selling, or the thread will get deleted. Check it:

I did have a fond memory of Matt, and almost shot tracers into it to solve the issue... OH, NO HE DIDN'T!!! Yeah, that shiit just happened...

PInning and welding a Manimal will also solve your problem. Google that. Nevermind. I got this. http://lmgtfy.com/?q=Manimal+muzzle+device

Mill this down until it clears under your rail. It'll solve your problem. https://www.google.com/search?source=hp&ei=pZmLWpiuC9OijwO17ILYDA&q=yhm+specter+gas+block&oq=yhm+spetcer&gs_l=psy-ab.1.1.0i13k1l2j0i13i30k1l8.505.3813.0.8427.12.10.0.0.0.0.251.1085.0j6j1.7.0....0...1c.1.64.psy-ab..5.7.1079.0..0j0i131k1j0i22i30k1j0i8i13i30k1j33i160k1.0.DAScSnaMrOI

OOOOHH!!! Rebar cutter, too. I always wanted to try to blast some rebar in half with one of those. I just don't wanna eat shrapnel...

How can you relegate such a magnificent beast to truck gun duty?...

I can see that the alignment is off in the pic. The handguard is twisted counterclockwise from the upper, which would cause the rear sight to need more left adjustment. It might be the cellphone pic, but that's what the pic is showing me...

The one with the MagPul SGA stock is pretty damn cool, too.

Because most F Class guys are 32"-barreled bolt gun snobs. We've had a few cool F Class guys come through here, though. Most of the ones that show up here are telling us how we're doing it wrong because it wouldn't win an F Class match...

That'll be fine. 308 rifle buffers are 5.200" long. The Armalite spring is the EA1095, and works wonderfully in both rifle and carbine recoil systems. The rifle receiver extension is the same everywhere - same exact internal depth as the AR15 rifle receiver extension. You'll be just fine, as long at that wasn't a DPMS AR15 rifle buffer, which is 5.900" long.

Rear sight too far to the left, during adjustment? The rail is crooked. You can see it in this pic. That'll do it.

This one is decent, from Primary Arms. I used it on the 25/45 and the Grendel, recently. http://www.primaryarms.com/kak-industry-a2-flash-hider-5-8x24-kak-a2-flash-308

Could be. Broken ejector or ejector spring. That doesn't account for the extractor letting the spent brass go before it's rearward, though. Best thing to do is take the bolt completely apart and inspect it.