Xanthos build \m/

[washguy]

And that mag....get a 5/10 round alu-min-uim  mag without rubber.....Wash

I might have to throw a Dikstroker gay flag on you for that handguard

[Boot_Scraper]

7 minutes ago, washguy said:

And that mag....get a 5/10 round alu-min-uim  mag without rubber.....Wash

I might have to throw a Dikstroker gay flag on you for that handguard

 

My wife said it looks like chicken wire......

[Boot_Scraper]

I'm happy with it

 

Still need more parts top finish it though.

Edited November 21, 2018 by Boot_Scraper

[98Z5V]

Holy Shiit!!!  

[Robocop1051]

So fuckin sick!!!

 

wait.....

 

wtf is that hella gayass pistol grip!?!?

thats like getting a hot stripper, and she has a fat hairy mole on her titty!! I can’t even fuckin look at it. 

[Robocop1051]

Ps. Call MidwestPX and see if they’ll make you a 5rd PMAG “stubby”. I got one years ago. It’s flush with the magwell. It’s my favorite magazine for bench shooting. 

[Boot_Scraper]

6 hours ago, Robocop1051 said:

 

wtf is that hella gayass pistol grip!?!?

thats like getting a hot stripper, and she has a fat hairy mole on her titty!! I can’t even fuckin look at it. 

Hey man, some people like hairy titty moles. Different strokes for different folks. Guess you don't want to shoot it now....

 

6 hours ago, Robocop1051 said:

Ps. Call MidwestPX and see if they’ll make you a 5rd PMAG “stubby”. I got one years ago. It’s flush with the magwell. It’s my favorite magazine for bench shooting. 

I need one of those. Might try make my own. 

[washguy]

here ya go......16 bills   5 rounds...they work    https://www.44mag.com/product/asc_308_5_magazine/308_ar15_magazines

Wash

[Whiskeyfish]

Nice build, Boot_Scraper!!

Wash, that find is perfect timing. I was just looking for a couple today. Good price too!!

SIX LEFT!!!

[washguy]

59 minutes ago, Whiskeyfish said:

Nice build, Boot_Scraper!!

Wash, that find is perfect timing. I was just looking for a couple today. Good price too!!

SIX LEFT!!!

44mag has always been good to me   sometimes on certain mags theres free shipping too    ....Wash

[Whiskeyfish]

44 minutes ago, washguy said:

44mag has always been good to me   sometimes on certain mags theres free shipping too    ....Wash

I knew I had to get a couple. I got so mind swayed, I forgot. I needed the upside the head.

[Whiskeyfish]

The 5rnd ASC mags arrived. On testing, they didn't seem to latch very well at all. In fact, with a little wiggle they fell out. Then I tried adjusting the mag catch spring and button. Didn't help. So I grabbed the needle nose and stuffed them up, towards the top in the mag-catch hole towards the feed lips. Gave them a little manipulative persuasion. That did the trick. The mags now lock in solid, and release perfectly.

[98Z5V]

On 11/20/2018 at 6:13 PM, Boot_Scraper said:

I'm happy with it

 

 

[Boot_Scraper]

"And Boot said, let it be light, and it was light and it was good."

Got it all built and bedded. By far my most favorite weapon to date. Going ops check it tomorrow. Fingers crossed. 

"THAT'S F&*KIN BADAZZZ"- Phil Anselmo

[jtallen83]

She does look BADDAZZ for sure 

[Robocop1051]

 That is definitely something to be proud of   

[Boot_Scraper]

Probably ended up being the world's most expensive single shot 

[Robocop1051]

Where's the final weight, with optic!!??

 

[Boot_Scraper]

@Robocop1051

Minor setback. When I went to torque up the barrel nut, it went to shtt. The Brigand handguard uses  a jam nut rather than a conventional barrel nut. It allows the handguard to be made with a decreased diameter. Long story-short, I used the wrong tool for the job, sweated the petty thing when I should have petted the sweaty thing, and fuct it up. On the bright side, I spoke to Brigand today and they hooked me up. Should be here this week. 

Edited December 4, 2018 by Boot_Scraper

[washguy]

Boot      I dunno brother?   Sometimes a crescent wrench aint right for the job     Should I let Dikstroker know whats up?   Wash

[Boot_Scraper]

1 hour ago, washguy said:

Boot      I dunno brother?   Sometimes a crescent wrench aint right for the job     Should I let Dikstroker know whats up?   Wash

LOL,that's coldblooded!

Lemme try to explain. So the jam nut I mentioned is the same size/pattern as a mil-spec 5.56 barrel nut. You read that right. 5.56. My dad bought some cheap azz multi-tool thingy-ma-jig off fleabay to swap out his HG. So I says to my self "Self, you can probably modify this to make it work." and it did work, but I've never been able to leave well enough alone.

 

 

 

308AR barrel nut spec is 30-60lb-ft. My gas tube opening was lined up perfect at 28.9lb-ft. Shoulda stopped there, but tried to make the next notch and the BS tool gave up and mangled up the jam nut. This time I am more prepared. Bought one of these. Very nice tool!

 

 

All is well that ends well Wash. The day we stop learning is the day we stop trying.

Edited December 4, 2018 by Boot_Scraper

[Armed Eye Doc]

[Boot_Scraper]

7 minutes ago, Armed Eye Doc said:

[sketch]

hahahaha! tripple.. doh! that might be a first? 

[washguy]

boot  I see where this is going.....damn now its Dad's fault for getting it off of Ebay.....geeeez      and I might not have warned ya bout this lightweight crap....doesnt take much to turn it to crap...and once again do not tighten the MOFO down till it squeeks 

Wash