98Z5V Posted July 17 Report Share Posted July 17 (edited) 2 hours ago, sketch said: I haven't made it to the end of the srs interview with newscum but I found this. That sums it up. https://youtube.com/shorts/8g2xy9-KWkI?si=ahzqwEkAo65LKu57 There's a reason Shawn Ryan did that intervierw, made sure it went long, and got the details to the questions he asked Gavvy... These will all be sound-bit clips to extract, and use against Gavvy when he makes his Prez Run in a couple years... Brilliant, on the part of Shawn Ryan. Edited July 17 by 98Z5V Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 17 Report Share Posted July 17 Told ya - think Bigger Picture... Why SRS did what he did. Langley is all hung up about what Gavvy said - because Gavvy is lying his ass off, on a HUGE podcast!... Well, THINK about that... What was Shawn Ryan setting up? Bigger Picture... Check this one... Joe Rogan couldn't have set this up better - but Joe Rogan heard this was going down, so he sent a direct question to Shawn Ryan, to ASK Gavvy. That's when Gavvy said, "Motherfucker..." Look into it - this was a Master Class on taking down a prima donna pompous asshead Dem elitist, that thinks he's walking into the next White House... Soundbites for YEARS out of that 4 hours with Shawn Ryan. That wasn't an accident... Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 17 Report Share Posted July 17 Back on topic... Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 18 Report Share Posted July 18 Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 22 Report Share Posted July 22 Quote Link to comment Share on other sites More sharing options...
Armed Eye Doc Posted July 26 Report Share Posted July 26 @98Z5V, is this your channel? Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 26 Report Share Posted July 26 3 hours ago, Armed Eye Doc said: @98Z5V, is this your channel? That is a very, VERY accurate depiction of most of my days at work... You wouldn't BELIEVE some of the shiit that people do to their machines. Then, they lie about it, like they had nothing to do with it, and you never get the full story. I usually have to FIGURE OUT the ful story, backwards, assessing the damage - and I call them with a quote for repair, and a probable cause of the situation in the first place... That's when they say, "Oh yeaaaah, that did happen..." Your labor estimate is high, because you fuqn lied to me from the start... I had to spend alot of time determining how you possibly fukked this thing up like this... Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 27 Report Share Posted July 27 The fallout from this is Epic - and it's all even better coming from Johnny B... Quote Link to comment Share on other sites More sharing options...
Rsquared Posted July 28 Report Share Posted July 28 On 7/26/2025 at 4:30 PM, 98Z5V said: That is a very, VERY accurate depiction of most of my days at work... You wouldn't BELIEVE some of the shiit that people do to their machines. Then, they lie about it, like they had nothing to do with it, and you never get the full story. I usually have to FIGURE OUT the ful story, backwards, assessing the damage - and I call them with a quote for repair, and a probable cause of the situation in the first place... That's when they say, "Oh yeaaaah, that did happen..." Your labor estimate is high, because you fuqn lied to me from the start... I had to spend alot of time determining how you possibly fukked this thing up like this... I can feel for you on this. Similar to walking up to a piece of equipment that's not running. First thing I always ask the onsite engineer is "what did you do?". 9 out of 10 times they answer with the obvious "I didn't do anything". I always respond with "that's the first lie. This will go faster if you just tell me what you did". Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 29 Report Share Posted July 29 8 hours ago, Rsquared said: First thing I always ask the onsite engineer is "what did you do?". 9 out of 10 times they answer with the obvious "I didn't do anything". I always respond with "that's the first lie. This will go faster if you just tell me what you did". There are a few long-time customers that I have, where I do just that. "Okay, you're HERE, so you broke it again... I only see you when you fuq it up. Just tell me HOW you broke it, so I can get to fixing it faster..." Quote Link to comment Share on other sites More sharing options...
Cunuckgaucho Posted July 29 Report Share Posted July 29 9 hours ago, Rsquared said: I can feel for you on this. Similar to walking up to a piece of equipment that's not running. First thing I always ask the onsite engineer is "what did you do?". 9 out of 10 times they answer with the obvious "I didn't do anything". I always respond with "that's the first lie. This will go faster if you just tell me what you did". Or the other one where your working on something out in the plant, say 3 phase 600v. Then some office person come out to complain that the microwave in the lunchroom isn't working so it must be something you did Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 29 Report Share Posted July 29 2 hours ago, Cunuckgaucho said: Or the other one where your working on something out in the plant, say 3 phase 600v. Then some office person come out to complain that the microwave in the lunchroom isn't working so it must be something you did I'm still dealing with something like that, right now. Except, she doesn't want ME to work on it - she wants the other senior tech, that's only there 1 or 2 days a week. No, prob, whatsoever. You'll wait. I'm the only person that's ever touched that machine - except when she takes it to local shoody backyard tech, then comes to me to complain - and I call her out on work I didn't do. Doesn't helpt hat she's an angry lesbian, haates alll - AAAALLLLLLL - men. I just don't take her shiit... So, she came in, "There's oil all over the front of my engine, you're the last one that worked on it!!!" Hey, Chica, you were here 6 months ago, and you have another 960iles on your machine since you left. The oil is all the way at the top of your engine, so it's a problem from somewhere high ON the engine. Turbo oil feed line, I'd suspect. Gimme a few days, and I'll find it. Fukc, it was in her clutching. Secondary clutch bearing spun itself out, completely cored the trans input seal, and sprayed trans oil out the clutch outlet duct, all over the front of her engine. Inside that secondary clutch were melted slider bushings - that DON'T MELT... well, gave her an estimate. She bitched. I told her it had not a single thing to do with the full service 960 miles ago, and it was from extended high RPM operation, ONLY. Her answer was, "I like to drive fast..." Alrighty then, YOU are the problem with your machines issue. If you can CAUSE it, or you can PREVENT it - that doesn't fall within any king of "warranty" type of complaint, whatsoever. You are the one that did it. So, after the primary problem is resolved - the oil everywhere, and the source of it - it's still fukced up. Creeping in gear, walking at idle, moving when it shouldn't, at idle. Call her back up, tell her that more than the initial has been damaged by her misuse of the machine - and she's PISSED. And wants someone else to work on it. I laughed, and said... "Well, Gladly, Then..." Passed it to the other senior guy there, when he came in, told him the backstory, and he says "I don't even KNOW her!!!" Yeah, brother... Love ya. But, she's YOUR problem now.... Quote Link to comment Share on other sites More sharing options...
sketch Posted July 29 Report Share Posted July 29 So many puns with oil. Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 29 Report Share Posted July 29 1 hour ago, sketch said: So many puns with oil. And Lesbians... Quote Link to comment Share on other sites More sharing options...
sketch Posted July 30 Report Share Posted July 30 You can fix that… Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 31 Report Share Posted July 31 The whole "Librarian Look" is so hawt... Quote Link to comment Share on other sites More sharing options...
98Z5V Posted August 1 Report Share Posted August 1 Brace for impact... Quote Link to comment Share on other sites More sharing options...
98Z5V Posted August 2 Report Share Posted August 2 It's Spicy Friday! Quote Link to comment Share on other sites More sharing options...
dpete Posted August 2 Report Share Posted August 2 How many had friends like this at concerts? Quote Link to comment Share on other sites More sharing options...
98Z5V Posted August 2 Report Share Posted August 2 That's HILARIOUS!!! Quote Link to comment Share on other sites More sharing options...
98Z5V Posted August 5 Report Share Posted August 5 Johnny B. It's Spicy... Quote Link to comment Share on other sites More sharing options...
98Z5V Posted August 5 Report Share Posted August 5 Since I'm on a Sydney Sweeney roll - I was confused by this vid. I didn't know if I should stash it in the Politics Section, or where. I'm staying on that roll, right here. This is awesome... 😍❤️ Quote Link to comment Share on other sites More sharing options...
Armed Eye Doc Posted August 6 Report Share Posted August 6 Quote Link to comment Share on other sites More sharing options...
98Z5V Posted August 6 Report Share Posted August 6 Truth... Quote Link to comment Share on other sites More sharing options...
98Z5V Posted August 6 Report Share Posted August 6 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.