98Z5V

Somewhere here, I posted pics of the rifle-parts box. I offered anyone that could name all the parts some free schit. I don't remember what I offered for a winner, but it wasn't cheap schit. That still stands, but now you have to find the post, and the pics of parts box... <dontknow> <laughs>

I'l take your newbie schit one step at a time. You've build some bad rifles, but you're fcuking new. So :stfu2: Your other choice is: run your mouth, and I'll fcuking chase you down all over this board and slam you, as long as you feel like takin' that ass beatin'. Figure it out. Come back when you think you got it. I haven't lost one of these yet. just so you know. 1) He knows, from a personal Meet-N-Greet. Those happen from time to time here, on this board, but usually only in the SouthWest. Travel, or get left behind. As you have, here. I'll show you what's in the Banana Hammock, if you'll lick it, smack it, and rub it down. Bet? 2) I've fcukin WITNESSED what he's done. If you want more, then show the fcuk UP next time a Greet is called. Until then, you can STFU. Tequila is my witness. Patron, to be exact. 3) NO. It doesnt stand for "ASS RAMMING." I don't know if that was your hope or not, but you missed your calling, here. Matbe you'll have luck elsewhere. Good luck, by the way. WAY above. Shchit, I might just spill the answers, anyway... <lmao> Goofball, you're cool, and you build some badass rifles. If you want to just jump ahead of the rest of the class, and just start slamming people,... I'm you're Huckleberry. Start right here.

Yes, it certainly did... I think the damn thing read me a bed-time story, too... It was very brief... :eek: :fawkdance:

Maaaaaan, don't even get me rollin' on the Banana Hammock, with what Rob has done... I'm just sayin'...

Sweet! Chalk up another one!... <laughs> You'll love 'em, brother, really. <thumbsup>

Brother, you can always shoot west, and hit one near me. I'm just sayin'. Shoot me a PM where you're at (city/TX is fine), and I'll load that locational info into the AS program, to try to get something started nearby. <thumbsup>

Doh!!! Had one of those in the back of the mellon once. ONCE. :eek: Fcuk the PR-24. In the neck.

Greg needs attention. I'm just sayin'... <laughs> <lmao>

I didn't get sound, either, in what he sent me - see if he can get mine downloaded, too. I raped that thing, with the Beta... :2nd:

Larry. Get on ARFCOM and post (copy and past exactly, your first post in this thread), in their industry section. They will - WILL - take care of you. I'm being serious, brother. Do that, and you'll get your mags. Justin will probably hop in there and take care of it himself. Here's a link to their Industry Section over there: http://www.ar15.com/forums/f_2/124_Magpul.html

I figured that one was comin'... Not like I haven't earned it, and all that... <laughs> By the way, it was the Cop that got me... Figures, too, with all the corruption going around lately... :fawkdance: Shady bastage tackles a guy on the street, then comes to the board to tackle some more... :eek: <lmao>

PIcs of the fired brass, and primers, man? That would help. What was the COAL on those loads, and are you shooting from a bolt or semi?

Wonder where that would fall in the NFA... 2 rounds with each trigger pull would probably put in "automatic weapon" status. Semiauto has to be only one round, with each pull of the trigger. Cool. <thumbsup>

I'll check one in a MagPul grip today. but I doubt it wil fit. 5.56 firing pins barely make it.

EasyE, your zero will change slightly, between those two rounds. It shouldn't take much to get the 168s in there, after the 147 zero. They'll be close, but off some.

Piece of cake, with the 8-inline, from Tuff Products. I've got two of these:

I still separate 5.56 brass - it's either .223 Rem, or NATO brass. Those two get different loads.

Several billet makers are doing the tension screw in the lower now, and for awhile. Ones that come to mind are Spike's (their 5.56, and eventually 7.62, if the make it) and Mega. Seekins probably has it, since they made the Spike's billet uppers and lowers. I'm sure there are more, but those are the ones I have personal knowledge of. It's something that needs to gain in popularity, for sure. <thumbsup>

^^^ <laughs> This is Rob, airsofted-up. Greg and I BOTH saved the pics!!!

Brother, I need to show you pics of my rifle-toolbox. You's schit at the amount of spare parts... <dontknow> <laughs>

Based on that info from Shilen, you'll find a very, very, very few barrels that are cut for 1:11.25 twist. This is supposedly the optimum twist for a 175gr BTHP Sierra MatchKing projo. 1:10 twist will run the heavies very, very well.

Provoked TactiCat into "Fight Mode" tonight... THAT was a mistake. :eek: :bat:

Now that you have a spare DPMS A3 upper... It's time to start building another rifle... <dontknow> <laughs> It is what it is, brother... <thumbsup>

Sad to see it go, brother. :'(

^^^ Co-Conspirator, right there... <dontknow> <laughs>