• Visit Brownells
  • Visit AR15 Builder
  • Visit
  • Visit Site
  • Visit Beachin Tactical
  • Visit
  • Visit Ballistic Advantage
  • Visit Aero Precision
  • Visit Cabelas
  • Visit Faxon
imschur

Lets see your MA-TEN Builds

136 posts in this topic

Thanks folks!  The Ma Ten build was a bit of a challange...  Even for one who has countless "small" builds under his belt.  The receiver / rail height differences were the most confusing.  With the help of Precision Reflex everything came out pretty darn good as far as I can see.  The Mk12 design may be outdated for some but it holds a firm place in my memories. 

 

It's almost perfect, just needs an Ops Inc 12th and you're all set!

 

Ahhhh....  Yes....  the time honored supressor issue.  From what I gather, Ops Inc. is no more.  I'm told my quest for a more auditory pleasing range session needs to be addressed by Allen Engineering.  A AE30 might fit the bill nicely...

 

IF I CAN EVER ESCAPE THIS POLITICALLY BRAIN DEAD NANNY STATE IN WHICH I CURRENTLY RESIDE!!!!  >:(

 

I live in the Land of 10,000 lakes and not one privately owned supressor! 

Share this post


Link to post
Share on other sites

^^^  Arizona welcomes you, my man.  <thumbsup>

Share this post


Link to post
Share on other sites

By request, some gun porn of my MATEN build (and current frustration):
IMG_1084.jpg

MATEN matched receiver upper/lower
Magpul UBR

Rainier Arms 416R parkerized 16" barrel (midlength)
ALG defense trigger

AXTS Raptor 7.62 charging handle
AXTS Talon 45/90 safety selector
Parallax Tactical slim-line fore-end, 14"
Griffin Armament 7.62 Flash Comp
Seekins adjustable gas block
Radical Firearms NiB BCG w/WMD coating
Magpul MBUS Pro sights (front and rear)

 

Share this post


Link to post
Share on other sites

Recently finished this build for a buddy of mine. He is very pleased with it. He wanted a mid to longer range set-up for targets 200 to 800 yards and something he could take elk hunting out to about 400 max. During initial testing/zeroing I was getting 1/2" groups using Federal GMM 175's...it runs very smooth and has been trouble-free thus far. Also, due to super-tight tolerances I was able to thermally fit the barrel to the upper receiver.

Specs:

Mega Maten receiver set, Faxon 18" heavy-profile fluted barrel, RCA bolt carrier group, Slash's CAR-10 buffer & spring, SLR adjustable gas block, Fortis Switch 14 handrail, VG6 Gamma 762 muzzle brake, Geissele SSA-E trigger, LaRue/Harris QD bipod, Vortex PST 6-24 SFP scope, ADM Recon mount.

Personally I think the rifle is "over-scoped" with the 6-24 but he had an extra one laying around and decided he wanted to use it so on it went.

20160725_150931 (1024x360).jpg

20160725_150943 (1024x507).jpg

 

Share this post


Link to post
Share on other sites

Nice looking rifle, love the idea of that tight barrel to receiver fit!

Share this post


Link to post
Share on other sites
18 hours ago, jtallen83 said:

Nice looking rifle, love the idea of that tight barrel to receiver fit!

Yes, me too! I hadn't done that before so I called Mega and they told me to put the upper in the oven at about 200-220 degrees until it heats up then slip in the barrel (with the extension lubed/greased) and then let it cool before putting the barrel nut on. It worked perfectly. I also did the same thing with another Maten set that I built for myself using a Mega barrel. I'm not sure if they make their receivers undersized on purpose or if I just got "lucky" with those two but needless to say I was pleased to have been able to assemble it that way. I will say that tolerances for the Maten receivers (upper/lower fit as well as barrel fit) are the tightest I have ever seen. The set comes with port door installed, no forward assist (thankfully), a billet charging handle, takedown/pivot pins installed, and you can use any standard AR-15 lower parts kit to finish the rest. It may be a bit pricey but worth every cent IMO.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now