Battle Arms Dev Posted May 24, 2012 Author Report Posted May 24, 2012 We'll keep updating this as more manufacturers make ready their 45 degree, and 45/90 compatible receivers.The difference between a strictly 45 degree selector compatible receiver, and a 45/90 compatible receiver is the FIRE/pictogram position. A 45 degree only receiver's FIRE/pictogram engraving is close to 60 degrees, which allows the 45 degree's position indicator to point at it when the selector is set on FIRE. A 45/90 compatible receiver's FIRE/pictogram engraving is situated at 68 degrees, thereby allowing both the 45 and 90 degree selector to both point to its general direction when the selector is switched to FIRE.45 degree compatible receiver:Accurate Armory, 45 degree only receiver (45/90 compatible receiver may be coming)[img width=810 height=378]http://i75.photobucket.com/albums/i314/Duffypoo/AccurateArmory.jpg45/90 compatible receiver:AR15.com billet receiver[img width=810 height=607]http://i75.photobucket.com/albums/i314/Duffypoo/DSCN0979.jpg[img width=810 height=598]http://i75.photobucket.com/albums/i314/Duffypoo/DSCN0977.jpgAXTS, A-DAC-F (forged) and AX556 (fully ambidextrous, billet) and AX762 (coming soon) receiverA-DAC-F[img width=810 height=507]http://i75.photobucket.com/albums/i314/Duffypoo/ADAC-F.jpgAX556[img width=810 height=637]http://i75.photobucket.com/albums/i314/Duffypoo/AX556.jpgAX762[img width=810 height=642]http://i75.photobucket.com/albums/i314/Duffypoo/AX762.jpgRainier ArmsPhotos courtesy of AR15.com, Military Moron, and Rainier Arms
jeffreyC Posted May 24, 2012 Report Posted May 24, 2012 I find myself experiencing a serious case of AX762 lust.
Robocop1051 Posted May 24, 2012 Report Posted May 24, 2012 I find myself experiencing a serious case of AX762 lust.Ditto... Until I see the price tag.
Battle Arms Dev Posted May 24, 2012 Author Report Posted May 24, 2012 Rainier Arms forged 45/90 compatible receiver is $145 <thumbsup>
Robocop1051 Posted May 25, 2012 Report Posted May 25, 2012 Rainier Arms forged 45/90 compatible receiver is $145 <thumbsup>It's on sale for $135 right now (05/24/12)http://www.rainierarms.com/?page=shop/detail&product_id=2124even less with "special" memberships
Robocop1051 Posted May 25, 2012 Report Posted May 25, 2012 The hurtin comes from the AXTS AX556 with a $430 price tag for a stripped lower. Then the AX762 stripped lower is expected to have a $600+ price tag. No thank you. They are beautiful ,but give me a Mega Arms MA-10 any day of the week.
Battle Arms Dev Posted June 1, 2013 Author Report Posted June 1, 2013 Umbrella Corporation will soon come out with its billet, 45/90 compatible receivers ;)
Battle Arms Dev Posted June 6, 2013 Author Report Posted June 6, 2013 Adding to the list of 45/90 compatible lowers...ours! :D We just received or 07 and 08 FFL earlier this week ;)
Rsquared Posted June 6, 2013 Report Posted June 6, 2013 Sounds great. But unfortunately, no more AR's (new one's sold that is) in my socialist state of MD when October hits.
Battle Arms Dev Posted June 12, 2013 Author Report Posted June 12, 2013 I hope to post prototype pics in couple of weeks :D
Robocop1051 Posted June 12, 2013 Report Posted June 12, 2013 I hope to write you a check shortly there after!!
edgecrusher Posted June 13, 2013 Report Posted June 13, 2013 I hope to write you a check shortly there after!! Hey, don't go hogging them, Roger has me on file too!
Robocop1051 Posted June 13, 2013 Report Posted June 13, 2013 Hey, don't go hogging them, Roger has me on file too! You stand in line like the rest! Faaaar behind me!!!
edgecrusher Posted June 27, 2013 Report Posted June 27, 2013 OK, been really thinking about this one Roger, and I would love SBR my two/three(?), maybe have you guys do the engraving? Consecutive serial numbers? I would love to be able to pass these along to my twin sons someday is the thinking!
Battle Arms Dev Posted October 17, 2013 Author Report Posted October 17, 2013 Aero Precision just announced its ambidextrous lower receiver, gen 2 link
Robocop1051 Posted October 17, 2013 Report Posted October 17, 2013 THIS is exactly what I have been asking for. I'm cussing that I just bought two lowers recently. Now I gotta figure how to grab this as well!!
Robocop1051 Posted October 17, 2013 Report Posted October 17, 2013 I think it's time to get Dave on board for another GB. Unless Pappy or one of the many other FFL'S want to take a shot at it.
Rsquared Posted October 17, 2013 Report Posted October 17, 2013 I can only have envy You and me both brother.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now