blue109

Oh that's cute....you can reach the s China Sea with your missiles? Guess what..... So can we.

Both sold

He was a little dramatic with the whole "touching the gun ruins the bedding" I still want one....just because.

Guess I'm not understanding what you need to measure on the AP4? if you are wondering if the receiver height will work with a standard FSB, it will. All new DPMS 308s, and any other brand upper built to match DPMS low specs is the same height as a standard AR15.

DPMS low is the same height over bore as an AR15 so a standard FSB will work. Jsesurplus has used ones for $8 right now. I think armalite discontinued it's set screw FSBs but they are pretty nice and you might be able to find one. I have 2 with no complaints.

Lol, that red line Obama drew, and then gave his private terrorist (rebel) army orders to cross (with chemical weapons we brought them from Benghazi) in hopes of fooling the American people into another illegal and pointless ground war? Glad we didn't take the bait, but the end result was ISIS. Really a lose lose for humanity and a win win for globalists.

Any midlength 16 will work for that Just need to rig a FSB. Drill and tap for set screws and shim it a little for fitment if you have to

Criterion is known for accurate match barrels, so they probably don't want to give up the accuracy to shave a few oz. The new hybrid is right around 2# if I remember, with a .75 gas block journal. I built my gun with heavy parts and it's right around 9# without optic.

Did you thread the nut on the bare upper by itself just to check the threads are right? No rail or barrel? It should spin on without any trouble. If not, they may have sent you an AR10 nut.

Sold

Lol. Cuz I stole it off the bumper of a city work truck. Sticking it to the man!

Looks new. Went with a raptor instead. $42 shipped. PayPal OK you eat any fee. Spf

Guessing the 80℅ part is the source of the issue. Worst case scenario you might need to fill and re-drill the pin holes on the lower. I've seen offset pins for issues like this for AR15s, but not sure about 308s.

Need some details to help you here. Is it factory built or home built? Bought new or second hand? Are you saying it is an actual DPMS branded rifle/receiver set (upper and lower)? Gen2 only has one rail height and it will measure out the same as the "low" DPMS but there is no high/low gen 2. It's just gen2.

Ouch. Is it an actual DPMS? or another brand in DPMS pattern. The Gen2 DPMS is a totally different receiver so unless you bought it as a complete DPMS G2 rifle you most likely have a first gen.

Somebody say LSD?

Guy at work gave me a broken little .25 Raven. He didn't want to spend any money on it and it was missing a couple parts. Figured I would send it off to buy-back heaven if we ever had another one, but curiosity got the best of me and $14 later and a box fron numric gun parts and it was Poppin away. Ended up trading it for the BCG that's in my matrix gun lol.

25mike is a beast. It will sink just about anything shy of a MBT. Brad has a pretty slow ROF though and a truck like that should have better suppression capabilities. It's also a pretty big round that will really limit magazine capacity. I understand upgrading the ancient M2s, but I dint see a reason for a bigger round. It would be useful in certain situations, like Ukraine with APCs all over the place, but 50 is plenty big for most situations. Maybe better to design a platform that makes swapping guns easier for different missions.

Damage industries has some smoking deals on small parts kits regularly.

Sexy and simple.

Come a long way since WW2 polok. jokes https://www.funker530.com/polish-military-goes-hardcore-badass-mode/

30mm seems a little excessive for a standard setup. GAU 19 seems a better fit. Goes back to the light tank discussion....why bother when you have a fast and maneuverable truck with a gun that big on it.

For a standard AR15? Everything works with everything lol.

Trying to figure out how to ban all this stuff before 3D printers evolve

Thanks for the ID. Was doing some reading. Mitchell made them first, and then MWG. Some people loved them, some had issues. I read you can pull the feed lip part out and replace it with one from a factory ruger mag for better reliability.