shooterrex

Question. My Arken is maxed out of elevation and still about 2.5 mils short at a mile. I was holding just over the top of the target. I have a 20moa scope base now. Will a 40moa scope base give me enough elevation or do I get them to make me a 50 moa base. EGW will make a 50 moa base and has 40 moa bases in stock.

Brother in laws latest. Please check the log splitter it won't start. He doesn't know how the fuel valve got shut off. That one was easy to fix.

I'm doing fine. It's 72deg in the house. Fire going in the fireplace. Just made a pot of chili.

6 deg w/c -8 pond frozen over.

I've had Starlink for about 3 years now. Works for me. A mini might be nice.

Nice

25 deg here with 30mph winds. This is the high of the day. Headed for single digits. Just a dusting of snow now.

I like my 6 ARC but I have 3 6.5Grendels. The ARC shoots just a bit flatter. The Grendel has a lot more factory ammo available. If you handload it doesn't matter. Both do 1000 yds in a small frame.

My psa runs and shoots. I wouldn't buy another unless it was really discounted. The only parts still from the factory are the receivers, and rifle recoil spring and buffer. Not that all those parts needed replaced I wanted to change things to suit me. I can build more and come close to the "bargin" price if I watch sales and don't get in a rush.

https://www.budsgunshop.com/product_info.php/products_id/149350/ruger+sfar+7.62+.308+win.+rfl+16+inch+20rd. 20" same price

The midlength AR15 gas tube is what they were/are using . The Armalite carbine gas tube is about 5/16" longer. The original tube extended in to the cam cutout. Just not to the middle or just past the middle of the cam cutout. My rifle had a front sight. Now just a gas block. I also installed a rail in place of the mid length plastic handguards. The rifle ran from the factory. I chose to change things around. The gas tube swap is the only thing that I really needed to do since I had a rifle recoil system.

If you can find it the Armalite recoil system for carbines is about $80.00 The gas tube is about $20.00 Measuring the gas port is easy if you have numbered drill bits. Drilling out the gas port is also easy. My PA10 came w/a rifle recoil system and stock. So I didn't need to change that. My gas port was OK. Never measured it or drilled it because the gun ran. I did replace the gas tube w/the proper length tube.

And it will need a proper length gas tube.

Cool

Common sense being used? Say it ain't so....

Hey, Clint Smith said " Shoot them in the dick".

And a fine present it is.

Merry Christmas everyone !

That was designed for the pistols to make the gas tube carbine length. That should slow down unlock etc. Not sure it actually worked but that's the story.

It was still moving. It needed shot again. If it can kill you it needs shot till it's not moving.

The new season of Reacher has started.

Esee model 4

The armalite kit is everything but the butt stock.

I have 2 Wilson Combat barrels. 1 6ARC. 1. 6.5 Creedmoor both shoot extremely well. My 16" BA 308 barrel shoots well but the Wilson's do a bit better.

Just bought a GSG Firefly in 22lr. Haven't had a chance to shoot it yet. Only $179.00 on sale.