98Z5V

We had one ripping around the site last weekend - he was on a mission. Head feathers up when he's looking, head feathers go flat when he starts chasing... Evil little bastards...

It's a 6.5 Creedmoor case with the neck pushed back, loaded with a .338 caliber projectile. With the equipment, it won't be that bad. You need to anneal them, before resizing, though. Here's a great thread on the full process: https://www.snipershide.com/shooting/threads/8-6-blk-reloading-info.7125253/

No, brother, they're real. And they're assholes...

I'm here for you, every step of the way. It's mechanical, so it can't out-think us.

To keep it local, I think we need to launch a bag full of Road Runners. They're miniature Velociraptors, and evil as fuk. When the bag hits, they'll all be pissed off, head in every direction, and try to kill everything in their path. That's my vote. Because I'm not gonna be anywhere in the vicinity when that Big sack of Grizzlies goes off...

#1. Doesn't matter - I'll fly to where real trees are, just to RIP that thing from a helicopter. #2. That IS Matt Cross...

The dude being interviewed sounds strangely like @Matt.Cross. I'm just sayin'...

#1. How much does it cost... #2. Can we collectively, here, raise that much money... The helicopter is a Hughes MD500 - so that's a Little Bird, literally. We can make this happen. What you think @Rsquared?

Gotta make your own - load it up. That's the best way. Commercial off-the-shelf won't be around for years and years.

You make that stuff, not buy it. Just sayin'...

This is from 4 days ago - I missed this one.

Posted up 6 hours ago, as of right now. Good one.

VERY COOL!!!

I love these things.

I'm about info over memes. Tom-Ass Official. Since Jan 2010. Spread the sickness - spread information.

Here's some pretty Legit opinions from the KAK Blog. KAK is a damn great company, for those that don't know. read on: https://www.kakindustry.com/blog/atf-final-ruling-pistol-brace-ban/

Didn't hit this one - not many of us did. Here's a Noveske Video of it, and it looks like it's a combination if Industry Range Day from the Monday "before SHOT starts," and it looks like the Crye Precision massive party that happens in the middle of the week. In 2020, this was held in the rented out UNLV Stadium. It's HUGE. And it's a fukkin' PARTY. Check this out - oh, also, post up anything else you got that came out of SHOT '23...

This information will come into case law, later, I'm sure, but here's Gear Head Works information from their ad of the Tailhook Mod 2... from SWAT Magazine... https://www.swatmag.com/article/embrace-future-gear-head-works-tailhook-pistol-brace/ The future of pistol braces has arrived. Gear Head Works (GHW) Tailhook™ is a revolutionary new ATF-approved pistol brace that further blurs the distinction between pistol and rifle. It’s one of the most practical products to hit the firearms marketplace in a long time. AR-15-type pistols were once considered little more than range toys. The advent of the pistol brace changed all that. Originally developed to help an injured veteran shoot, pistol braces took the market by storm and have been adapted to a variety of large pistols. CLEARING UP THE CONFUSION There has been considerable confusion surrounding the lawful use of pistol braces. In its Open Letter on the Redesign of ‘Stabilizing Braces’ issued 16 January 2015, the ATF took the position that, while affixing a stabilizing brace to a large handgun or pistol was perfectly legal, employing it as a shoulder stock with a firearm with a barrel less than 16 inches would constitute a redesign, resulting in the making of an unregistered National Firearms Act (NFA) firearm. In response to a query by the outside council to SB Tactical, ATF clarified its position in a new letter dated 22 March 2017. In the letter, ATF stated, “To the extent that the January Open Letter implied or has been construed that the incidental, sporadic or situational ‘use’ of an arm-brace (in its original approved configuration) equipped firearm from a firing position at or near the shoulder was sufficient to constitute a ‘redesign,’ such interpretations are incorrect and not consistent with ATF’s interpretation of the statute or the manner in which it historically has been enforced.” GHW has confirmation from the ATF that this applies to all ATF-approved pistol braces, not just those from SB Tactical. TO BRACE OR NOT TO BRACE Why equip a large handgun with a pistol brace in the first place? Why not go the SBR route? Let’s look at some benefits of a pistol brace. Equipping a pistol with a brace provides you with all the advantages of a handgun plus the greater stability of a third point of contact for more accuracy, better control, and an overall improved shooting experience. Since a pistol fitted with a brace is still classified as a handgun, there is no NFA paperwork, taxes, or wait times. You can purchase and sell it just like any handgun. It can be transported across state lines without notifying ATF. And you can carry your brace-equipped pistol anywhere and in any manner that you can legally carry a handgun, subject to state and local laws. Of course, a brace isn’t the only non-NFA option for a large pistol. Another effective option is to employ a single-point sling with the sling assist method for pistol stabilization. This method originated with protective details employing the HK MP5K submachine gun, and it works quite well. And with an AR pistol, you also can simply “cheek” the buffer tube. Not ideal, but it does provide a third point of contact for stability. In conjunction with a buffer-tube cover, it’s reasonably comfortable. GEAR HEAD WORKS TAILHOOK PISTOL BRACE Tailhook features fold-down arm that provides both horizontal and vertical stabilization. It works exceptionally well. Introduced at the 2017 SHOT Show, the GHW Tailhook pistol brace is a real game changer in the world of pistol braces. It has a unique combination of features that differentiate it from other pistol braces on the market. Two models of Tailhook are presently available. The Tailhook MOD 1 is the compact aluminum version that is made to directly fit a round pistol receiver extension (buffer tube), but can be adapted to many different platforms with the use of adapters. The Tailhook MOD 2 is the polymer telescoping model. The MOD 2 is the only five-position ATF-approved collapsible brace on the market. All GHW products are made in the USA. What sets the Tailhook apart from the rest of the pistol brace pack? The answer is its unique patented design. It’s as ingenious as it is simple. Viewed from the rear, the Tailhook brace is a teardrop-shaped ellipse with a fold-out arm hinged at the bottom of the brace and latched by a push-button release latch. The Tailhook offers true one-handed operation. There are no straps to deal with, making it quick to deploy. To deploy the brace, simply depress the recessed release button and pull the hinged arm down to form a shelf, which counterbalances the muzzle weight of the pistol and, in conjunction with the other arm, provides both vertical and horizontal stability. TAILHOOK MOD 1 Tailhook MOD 1 is machined out of a billet aluminum and fits pistol buffer tubes or adapter spuds ranging from 1.17 to 1.2 inches in diameter. It’s the most compact pistol brace in the world. GHW provided me with the MOD 1 for evaluation. At less than one inch thick and weighing only 4.5 ounces, the MOD 1 is the lightest and most compact pistol brace on the market. It’s also the simplest Tailhook. The MOD 1 is machined from 6061-T6 precipitation-hardened billet aluminum alloy and milspec MIL-A-8625 Type III hard-anodized. The stationary side of the MOD 1 is equipped with a limited-rotation QD sling-swivel socket. The MOD 1 clamps securely to any round pistol buffer tube or adapter spud with a 1.17- to 1.2-inch diameter. Just slip it on and tighten two socket-head screws with the included wrench. The clamp design eliminates the slipping and twisting that may occur with friction-fit braces. The diameters of pistol buffer tubes aren’t standardized but vary greatly from manufacturer to manufacturer. GHW is compiling a list of tubes that the MOD 1 is compatible with. GHW recommended Damage Industries 1.190-inch outside diameter Pistol Buffer Tube to me as a “near perfect fit,” so that’s what I went with. Also made in the USA, the Damage Industries pistol buffer tube is designed to use a standard-length carbine recoil spring and buffer and has an overall length of 7 3/8 inches. Machined from 6061 billet and hard-anodized to Mil-A-8625 Type III, the outside diameter of the tube was specifically turned to work with arm braces. [Editor’s note: At press time, we were notified by Gear Head Works that they will be offering their own pistol buffer tubes (receiver extensions) specifically made for the Tailhook MOD 1.] Although not ambidextrous, the MOD 1 can be set up for right- or left-hand use by simply installing the brace so it opens on the desired side. GHW plans on coming out with platform-specific adapters for popular weapons. As of this writing, adapters for the CZ Scorpion, Galil ACE, and Kriss Vector are in the works. The HK MP5K/SP5K adapter is already available commercially by combining the folding mechanism and hinge from either Atlantic Firearms or Ace stocks, a pistol tube, and a MOD 1. TAILHOOK MOD 2 Tailhook MOD 2 is the only ATF-approved five-position telescoping pistol brace. MOD 2 on MK18 clone pistol. Photo: Oleg Volk The MOD 2 is the telescoping model of the GHW Tailhook pistol brace. At the time of this writing, the MOD 2 had just become commercially available and was already sold out. The MOD 2 is made of injection-molded fiberglass-reinforced nylon polymer for rigidity, light weight, strength, and comfort. It weighs only seven ounces. The MOD 2 employs the same type of fold-down arm as the MOD 1, albeit polymer. The MOD 2 is initially available in right-hand only. The MOD 2 telescopes much like a typical AR-15 stock. GHW’s patented proprietary telescoping latch mechanism gives the user five locking positions, from 10.125 inches up to a 12.75-inch length-of-pull (LOP). This lets the user find the perfect “sweet spot” for balance. The outsides of the MOD 2 are smooth for comfortable “cheeking.” A web-sling loop is on the stationary arm. The MOD 2 comes with a castle nut, receiver end plate, and proprietary buffer tube, which is designed to prevent a rifle buttstock from being attached, key to ATF approval. Platform-specific adapters for the MOD 2 are in the works. MY IMPRESSIONS Tailhook pistol brace is adaptable to many firearms. Tailhook MOD 1 on MP5K clone. Photo: Will Hutchinson The MOD 1 is a solid product, very well engineered and obviously built to last. The compact form factor and clean lines of the MOD 1 aren’t only practical but look great as well. I installed the MOD 1 on a custom 300 BLK STT-15 pistol built by San Tan Tactical, whose STT-15 Ambi Billet Receiver is one of the best AR receivers on the market. Installation of the MOD 1 on the pistol took less than a minute. The MOD 1 is adjustable by sliding it along the tube and tightening the clamp in the desired position. Rearward positioning of the brace on the tube gave me the steadiest forearm support (it’s simple physics) and thus the greatest accuracy. This positioning also makes a leveraged gun take-away more difficult. After installing the brace, I put the pistol in my Sneaky Bags SPYDER Covert Rifle Bag, along with a few boxes of Hornady® American Defense® 300 BLK ammo, some Magpul® PMAG® mags, and my range gear, and headed off to the range. I found that the Tailhook works exceptionally well and is quite comfortable. It does an outstanding job of offsetting the muzzle weight of the pistol, resulting in less fatigue. The Tailhook provides both vertical and horizontal stabilization, and therefore greater accuracy, yet allows more flexibility in arm positioning than a brace with a strap. It also aids in recoil management, so the shooter can get back on target more quickly. It’s simpler and quicker to brace and unbrace than a strapped brace, which can be essential if used in a self-defense situation. You don’t want a firearm tied to your arm. In conclusion, the GHW Tailhook is an outstanding piece of kit that offers unparalleled performance. The MOD 1 has a suggested retail price of $119.00. The MOD 2 retails for $199.99. Eugene Nielsen’s background includes protective intelligence investigations and threat management, as well as red teaming security consulting. He has a BA degree from the University of California. He currently owns and operates an investigative and security consulting firm and is licensed in both California and Arizona. SOURCES GEAR HEAD WORKS (615) 549-8800 www.gearheadworks.com DAMAGE INDUSTRIES, LLC (574) 256-7006 http://damageindustriesllc.com HORNADY (800) 338-3220 www.hornady.com MAGPUL INDUSTRIES (877) 4MAGPUL www.magpul.com SAN TAN TACTICAL (480) 204-0082 www.santantactical.com SNEAKY BAGS (727) 228-4520 http://sneakybags.com

BOTACH is blowing out the Gear Head Works Tailhook Mod 2 for less than 1/2 price, if anyone is interested. Looks like they're trying to get rid of inventory, with all the bullshiit going on with braces. Retails $210, selling at $89. Black only. Cerakote can fix that, if black ain't what you want, just paint it, and be done. Here it is: https://botach.com/gear-head-works-tailhook-mod-2-telescoping-pistol-stabilizing-brace-black/

CARGILL. Yeah, THAT Cargill. Ref: Cargill Vs. Garland. Again - Yeah, THAT Garland. Merrick Garland. This is an important one, for pistol braces. But, it's about bump stocks?.... Yes. Important. Check this one out - this is the man. Hear his words.

New one from Tom Grieve:

@MikedaddyH, did you post this one already, here? It's important - I just got lost in all the memes, and can't remember. You emailed it, but I can't remember if it's been posted, so I'll post it.

Barrel has nothing to do with it - that's Gas System. Getting the Recoil System correct is the first part - balancing the Gas System to a proper Recoil System is what balances the two systems together, and makes a reliable gun. Gas systems are easy, once you have the Recoil System fixed, for a Large Frame. Gas Systems are WAY cheaper to fix - the money is in paying for proper parts to have a proper recoil system in the first place - you need enough ASS to control the MASS of the Large Frame BCG, the cartridge, and the force it implies when fired. Get out - go out and have a good night, man.

It's a 2-week to 6-week lead time on these uppers, should you decide to order one. They're scheduled for build when the order comes in and is paid for. Just a heads up.