98Z5V

I'm in AZ - and we can MC Plate just about anything, and everything. Motorcycle Plate. The state law here follows Motorcycle0Licensing laws. Daylight Street Legal Motorcycle Laws - on the books and legal. This is a hand-signal state for turns. In the daylight, you can hand-signal your turns. All your motorcycle needs is a mirror, horn, and LIGHTED license plate light - for daylight, I need a lighted license plate light?! Really? That's the laws here. For NIGHT TIME, Motorcycles MUST have turn signals. Period. Well, this state is pretty lax on what you can call a "motorcycle" here. We can license UTVs (those Polaris RZRs, etc.) as "motorcycles" and get real MC license plates for them, if you have a horn, mirror, and lighted license plate light - but those fuckers are only "daylight" legal. Do people drive them at night, no turn signals? Yeah, all the time. Do people get stopped? Not often, but once in awhile. Do some people have turn signal kits installed? Yep, but very few go that far. AND, they're not legal on any highway in AZ. Just city streets, rural roads, no state highways. There are laws directly against operating them in certain parts of Phx and Tucson, on any city streets, too - but that get's blown off by law enforcement most of the time. This isn't a "Cheap Jeep" that you're buying. It doesn't meet any crash-testing requirements that a real car, truck, or Jeep has to meet, and that's the kicker on it. It's sold as an offroad vehicle. It's not street legal, almost no matter what you can do to it, in almost every state out there. You just can't bring that thing to the crash-test standards that the Fed-Gov requires. In some states, can you get away with it? Maybe. I've never, ever seen one here in AZ with MC plates on it, though, operating on public roads... But, if you can street legal a UTV in your state - then you have a shot.

Greedy Bastard...

Don't do it - research into that deeper before you seriously think about plunking down your hard-earned coin for one. They're NOT street legal. It's the same as buying a side-by-side UTV. With very, very few State exemptions, based on your state, you'll never, ever be able to get a license plate for those things. Before you think about dropping a dime on it - go to your local DMV/MDV - whatever your state calls it - and see if you can Street-Legal a Polaris RZR 1000 or a Can-Am X3. If the answer from your DMV/MVD is "HELL NO!" - than you won't get that Mahindra Roxor legal, either.

30lb/ft to 80lb/ft is the M16/M4 Spec. The same should follow on the .308ARs - if we had a spec to follow. Unless your handguard manufacturer specifically states something direct, like 50lb/ft. 30~80 will get it done, lined up, and works on every small-frame AR (M16 and M4) out there in military service.

We're just stealing money from our kids and grandkids, brother. Nah, not really - when they're sixty, they'll still be paying off the interest on the current 20+ Trillion in debt, and the Fed can just print more...

Measure the distance from the gas port to the end of the barrel for me, if you get the chance. Barrel diameter at the gas port, too. I'll bounce it off other numbers available. Believe it or not, that looks like it'll work.

I can't even post what I REALLY WANNA SAY in this thread right now - all this bullshiit is just unreal. The Dems are dead-set on destroying this country with all their Free Shiit. It's pretty aggravating.

Last year, this upgrade violated me pretty good... I made @imschur pretty mad, bitching about it...

Forever, Honey...

It most definitely does, and you have to account for it - there's nothing that you can try to calculate, before you actually receive your own barrel, and install it. You can't figure out the timing of the barrel nut unless the barrel is IN the upper receiver. Check out the flange that I'm talking about: It's not minor, either - and it's not "standard" on a .308AR. Nobody can give you a number on that thickness, and even if you had it, you can't calculate it to try to time a barrel nut beforehand. Look at this thing: That flange is what the barrel nut locks to your upper receiver.

Pull your other ejector that you still have, take pics and measurements of the ejector, the ejector spring, and the pin. Let's go from there, and see if it's even standard .308AR parts or not. If it's standard ejector parts - then this is easy. You don't need to cross-post this on every thread that you think is pertinent, either - this one is sufficient. Put all your info that you find out, right in here.

(***In my BEST Ex-Wife Voice***) Why you always bringing up old shiit? This is why we can't have nice things!

Wow - I figured I'd hit Google and search for pics of this specific model. Look what happens when you do that... It's pretty cool... https://www.google.com/search?q=ArmaLite+AR10BA2&client=firefox-b-1-d&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjG7oHjyunoAhX4FjQIHVvaCvQQ_AUoAnoECAUQBA&biw=1252&bih=600 It didn't give me any specific pics of the rifle configuration, though. EDIT - I re-searched it, and changed it a little. Searching for "Armalite AR-10B A2" bring up more. Pretty good video on it, still watching it - don't know if this guy addresses the Elevation Drum or not...

Listening to some Imagine Dragons, Radioactive. Lemme know what you guys think.

BWAAAAAAAAAAAAAAAAAAAAAHAHAHAHAHAAAAAAAAAAAAAAAAAAHAHAHAAAAAAAAAAA!!!!

I have that one on DVD - damn great ending to a Rambo Saga. Love it.

It's Stubborn Ignorance, brother. I refuse to give up grass, for the insane heat. Fuk the heat. I'll beat it one way or another, even if it cost me 10k gallons a month... @DNP knows my "Fetish for Arizona Grass" pretty well... It goes WAY deep with me...

That was badass, but I can't stand the typo in the title of the link. There's not FAMPTON singer anywhere. Yes, Alex, I'll take FRAMPTON for $1,000. *** Not on you Mike- the guy that posted that was an idiot. That doesn't detract from how badass is it, though...

I hear ya, Nick. Can't wait to see you again, too... I cut that shaggy fuckin' lawn today, and this pic is for @Armed Eye Doc...

Au Contraire, Mon Frere... It's time to plant my Summer Grass now, so I have a lush, green lawn throughout the summer... Rye in the Winter ("winter grass") and Bermuda in the Summer (that's my "summer grass"). I've got it going on down here in the heat, for the grass, brother... Over-seeding is where it's at.

Get after him, Mike!

I have grass, brother - and that shiit is HARD to keep up out here in the desert! Hold on, I'll get you a pic - in the middle of the night... You just wait for it... Flash on the cam, at 11pm here, didn't work. I had to turn the flash off and break out the torch. I have grass, fukker... You have to be a Badass, or Stupid, to have grass in the desert. I don't know what I am, yet, but it did great this winter. I think I'm a Stupid Badass... The Cactii are doing great, by the way - they say "Thanks for asking about us!" Oh, you see that grass there? It's in the foreground... 🤣

I did, too - in a way, man. I didn't cut the grass, so I need to get my ass up early in the morning and get that done. But, I DID load up 340 rounds of 178gr .308 Match loads. Had to put a dent in that pallet of brass that @dpete sent me, so I figured I better just stop bitchin' and get after it...

You've already asked this in two other threads - stick to those two threads, instead of spamming your question all over the board. It works out better like that. You might not get your immediate answers, right away, but you'll get them. Posting the same question in every thread you find, doesn't magically make information appear. Believe me, everyone on this board knows what you're looking for - and you have answers elsewhere. Thanks for listening.