98Z5V

THIS IS SO COOL, MAN!!!

The Go button on mine can do a few things - it starts the countdown to a preset delay, before it beeps and starts counting. The beep is the audible for the shooter to go. I set mine for a 3-second delay, then the beep will sound, and timing starts, as well as shots recorded. You can turn that delay function off, so as soon as you hit the Go button, the beep sounds and timing starts. You can also set it up to run a PAR time. Say you want to get 10 rounds on target, from holster, and you give your self 3 or 4 seconds to do that. You set up the PAR function, and it beep at the beginning and at the end, letting you know you reached the time limit. The Go button starts that activity. My timer won't stop, until it shuts itself off from inactivity, or I physically turn it off. Once you hit that go button, it'll record shots until it runs out of battery power, if that's the case. If there are shots going, it's recording, once it's started. We've shot through courses before, with it clipped to my left pocket. We run the last one, and start doing different things. I'll look down, and it's still on, recording the 100th shot and 900 seconds later, for example...

This is such an awesome project, to watch happen. Impressive.

This is the one. If you want 10mm perfection, then this is the one. Nothing else ,from any other manufacturer, even comes close to it. No one.

Colt Delta Elite, brother. Search one out, but it won't be cheap - THAT is for certain...

Why, yes, yes I do. Thank you for noticing... Not the first time I've heard that...

Extremely well - but it's thin. It really does perform, though.

From commercially available lube, I'd say M-Pro 7. It is excellent. As a factory rifle, from that manufacturer, I really don't need to tell you to look at the recoil system, because that's not an issue here. Not with them. I'd have to lean on the lube side of the house on this, and the total round count through the gun. Shoot it more, and lube the hell out of it. Like, damn near dripping wet, but not quite. No lube in the chamber, though, or the barrel - don't need it there.

Yep, and right now it will solve the issue, permanently. I completely forgot about that innovative little bastard. That's the current cure, for sure. Good looking out, brother.

Your restraint was commendable, my good man - but I'm damn glad you named them. That needed to be done, in a big way. EDIT - This is a shocking statement from them:

Complete factory rifle, from Armalite? Or was this built/put together with parts? Lube, too, and about a gallon of it, on a new .308AR gun.

Right on, man - I love seeing these things run like they are supposed to. So, my info wasn't bad, huh? You know, considering that I'm "just an assembler..."

As far as we've been able to trace down - that's an upper receiver dimensional issue. As of right now, there is no cure for it. The Tubb Carrier Weight System used to cure this very thing, but that product is discontinued. When you close your receivers, the back of the BCG should push the buffer off the buffer retainer, right when those receivers close. The buffer should never, ever touch the buffer retainer when the receivers are closed, and due to that, it will never contact the retainer during cycling. The only time the retainer "stops" the buffer, is when you open the receivers. The Tubb CWS added 0.080" to the back of the BCG body - thus, eliminating this issue.

Oh SHIIT! I figured out what THIS is about!...

After I publicly stated that, some motherfucker here sent me a completely anonymous bag of 10 gas tube roll pins, too. I went fucking crazy. Another time, I received an anonymous bag of 6 MagPul aluminum trigger guards. The evil here cannot be understated. There are some bad-intentioned people lurking these boards, and they're out to harm your credit, or wallet. You need to watch out, and I mean that. I, myself, have learned to "pay it forward," and I might send something to you - for payback against my past "anonymous" transgressors. You need to understand now, it's not personal. I mean no harm. I will label the package with Dirk's name, though...

Fucking gas tube roll pins got me on that, a LONG time ago. You are forewarned. Right now. A spare gas tube roll pin ended up as a brand new rifle. I kid you not. You have the sickness...

Just measure with calipers on this one - the .260 - Lyman doesn't have anything like that for this one. Yep, it's a mini-lathe, of sorts, while supporting the inner diameter at the same time. That expander die they have - that's different from the regular expander die - you have to set that thing at a certain depth, in order to create a "ring" to machine through, to make the brass right. It's way more complicated than I thought, until I talked to them on the phone. After talking to them, it's not complicated at all - with the right tools. I bought everything they said I needed, and I didn't buy any of the extras (an ergonomic hand-hold tool, etc.). This is the first case I've had to neck down... from .308 brass. if I was necking UP 243 win brass, it wouldn't be an issue. I just have a mad base of 308 Hornady Match brass that I've accumulated.

No, we didn't.We helped you make one LIGHTASS BUILD, brother. Ground Truth. I know it hurts, to hear that, but it is what it is... Remember... YOU asked for that...

All I did was say, "You wanna shoot this one, brother?... Just hold 3 mils on that target at 500, and you're there... "

What a fuqr...

Bipod $$ sent, brother.

Lemme know - I'm sure it'll be posted. I'm interested in this platform - thanks to you... Yes, the M4E1 sets are perfect - I love them.

CR, I've got a handful of the PA 4~14 FFP models, and none of them exhibit what you're concerned about. I've got 2 of the ACSS HUD DMR 308 scopes, one on a Rem 700 AAC-SD bolt gun, and it's been on there the longest, through thousands of rounds. The other one is on a Mk12 Mod 1 gun, in 5.56. ***Note - you use the ACSS HUD DMR 308 scope on a 5.56gun that only shoot heavies - 75 or 77gr loads. Their trajectory is very close to .308 Win heavies, that this scope was designed for. You only use the specific ACSS HUD DMR 5.56 scope on a gun that is shooting lighter projectiles, than the 5.56 heavies. I have 2 or 3 of the mildot 4~14s - I know one is on the 25/45 Sharps, and one is on the heavy Grendel SPR-ish gun. I think I have another one mounted on something else. I mounted up the ARC-2 MOA version on Matt's Grendel Mk12 Mod 1 gun, and shot the piss out of it. They're all good, zero issues at distances out to 900 yards last fall, and the typical max distance that they shoot at is 845 yards. They all work great. I have 2 or 3 of the 1~6PA scopes, too, in SFP, and have never had an issue from any of them. There's a Griffin Mil 1~6 version on the 18" Light Grendel, a .308 BDC version on a 16" 308, and I'm pretty sure I have a mil-dot version on the .338 Fed gun. I can't even count how many of the mini red dots I have on other guns, including one on the 45/70. I only put it on there to see how long it would take to kill the red dot - and it's not dead yet. I think I did that in December 2014. If you have an issue with one of their scopes, it's gonna be within the warranty period - on the one's that don't have a lifetime warranty. They willnot give you any grief whatsoever in taking it back and giving you a new one.