sketch Posted February 13, 2023 Report Posted February 13, 2023 So at the range today with the ar39, and it performed very well. Had a good time with @Cunuckgaucho felt like a rainy day to (@#$%!***^%°) clean my guns. The 308 was dirty , mostly from the can. It was initially giving feed issues, that's what made the decision to (@#$%!***^%°) clean guns. Got the ar39 stripped down to pulling the firing pin cotter pin. There was only half a pin. I haven't (@#$%!***^%°) cleaned this rifle since the fall shoot of 2017. Let alone shoot it that much since maybe 200 rnds, after? I think it was held together with carbon build up. The other half was stuck in the bcg. Has anyone ever? 🍻🍻
Armed Eye Doc Posted February 13, 2023 Report Posted February 13, 2023 1 hour ago, sketch said: Has anyone ever? Cleaned a gun? Not on purpose.
Cunuckgaucho Posted February 13, 2023 Report Posted February 13, 2023 Rainy days are good nap days... As always a good time shooting south of the border
98Z5V Posted February 13, 2023 Report Posted February 13, 2023 1 hour ago, Cunuckgaucho said: As always a good time shooting south of the border
Cunuckgaucho Posted February 15, 2023 Report Posted February 15, 2023 On 2/12/2023 at 10:23 PM, 98Z5V said: Well if you ask @sketch nicely he might share pictures of the stripper I introduced him to on Sunday. She did leave with him after all.
MikedaddyH Posted February 15, 2023 Report Posted February 15, 2023 Only strippers i knew there where Bambi and Thumper. Damm they must be old now. Lol.
Rsquared Posted February 16, 2023 Report Posted February 16, 2023 On 2/12/2023 at 10:48 PM, Armed Eye Doc said: Cleaned a gun? Not on purpose. Did somebody call?
sketch Posted February 18, 2023 Author Report Posted February 18, 2023 On 2/15/2023 at 6:55 PM, Rsquared said: Did somebody call? There is evidence of you clearly cleaning a rifle. But that has somehow caused a shift in the matrix.. run for president or the lottery. I've tested @Cunuckgaucho stripper with various gages and she dosnt like the rubber coated sheath. I have to run her at a deeper level and sometimes twice to perform as sold. Thus shredding the line on my old wire. Not to worry I just hold it over the box and shake it.
sketch Posted February 18, 2023 Author Report Posted February 18, 2023 98 cents for ss pin. Well see if the hws pin works?
sketch Posted February 26, 2023 Author Report Posted February 26, 2023 The strip meister 👍 20230225_172844.mp4
Cunuckgaucho Posted February 26, 2023 Report Posted February 26, 2023 2 hours ago, sketch said: The strip meister 👍 Check with your scrap guy, up here if you have a load of mixed scrap they bases the overall price on the lowest value. Sort it by size #16AWG clean copperand larger fetches best price( #1 copper) smaller stuff fetches lower price per pound
sketch Posted February 26, 2023 Author Report Posted February 26, 2023 If that's the case , I'm gonna smash it into a ball so it's one peice of clean copper!
98Z5V Posted February 26, 2023 Report Posted February 26, 2023 1 minute ago, sketch said: If that's the case , I'm gonna smash it into a ball so it's one peice of clean copper! Make your own Barnes TSX projectiles... Buy bullet molds, brother, or have someone make some very specific molds for you...
sketch Posted February 26, 2023 Author Report Posted February 26, 2023 Like I need another hole in my head...
sketch Posted February 26, 2023 Author Report Posted February 26, 2023 That was a gf reference .. 🍻🍻 22!
Cunuckgaucho Posted February 26, 2023 Report Posted February 26, 2023 Well if he's going to make bullets he'll be able to make a lower.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now