outlaw7 Posted November 8, 2012 Report Share Posted November 8, 2012 this is my first build ever. got the bro fallout10 in digicam in this week. heres some eye candy. any input or advice anyone can give on a 308 build would be much appreciated.my plan is to have this be a 5-600 yd shooter. I have the sig 716 for closer stuff and a savage 10ba for longer range stuff. im planning on running a 20" rainier arms barrel. just not sure about anything else. any suggestions on what parts to get and where would also be greatly appreciated. Thanks Quote Link to comment Share on other sites More sharing options...
unforgiven Posted November 8, 2012 Report Share Posted November 8, 2012 Very cool looking parts brother. <thumbsup> Quote Link to comment Share on other sites More sharing options...
outlaw7 Posted November 8, 2012 Author Report Share Posted November 8, 2012 thank you sir, so these are the parts im looking at getting so far,http://www.rainierarms.com/?page=shop/detail&product_id=2692http://www.rainierarms.com/?page=shop/detail&product_id=2493do you think this forearm would end up covering up the gas block? it says its a rifle length gas system, just not sure how far down the barrel that is. Quote Link to comment Share on other sites More sharing options...
Matt.Cross Posted November 8, 2012 Report Share Posted November 8, 2012 do you think this forearm would end up covering up the gas block? it says its a rifle length gas system, just not sure how far down the barrel that is.I would think probably not. If you were getting into Troy's two-piece FFHG options, you might find one that could extend beyond your gas block, but personally I can't understand why anyone would want to make their gas block impossible to access quickly. Maybe that's what you're trying to avoid, I can't really tell from the way the question was asked. If that's the case, disregard my statement. <thumbsup> Quote Link to comment Share on other sites More sharing options...
outlaw7 Posted November 8, 2012 Author Report Share Posted November 8, 2012 i was hoping to still have it accessible because im wanting to run an adjustable block. Thanks for the response though. Quote Link to comment Share on other sites More sharing options...
imschur Posted November 8, 2012 Report Share Posted November 8, 2012 I would skip the Rainier Select and go with the Ultra Match if it was my build. For $100 more your getting a premium barrel and leaving less to chance. Or get a Krieger Criterion from Fulton Armory. JMHO Quote Link to comment Share on other sites More sharing options...
outlaw7 Posted November 8, 2012 Author Report Share Posted November 8, 2012 http://www.fulton-armory.com/barrelfatitan20nmhbarss1x12936gasblock.aspx^this one? Quote Link to comment Share on other sites More sharing options...
unforgiven Posted November 8, 2012 Report Share Posted November 8, 2012 Fultons got good stuff brother.IMO <thumbsup> Quote Link to comment Share on other sites More sharing options...
98Z5V Posted November 8, 2012 Report Share Posted November 8, 2012 That charging handle is gonna TEAR some gloves and hands up... Just sayin'...File that poop down, after a few range trips, or look for finger transplants. :o Quote Link to comment Share on other sites More sharing options...
planeflyer21 Posted November 8, 2012 Report Share Posted November 8, 2012 Dremel with a Cratex will fix that right up.One of my instructors, Bad Ass Sensei Master, loves sharp poop. Says "It lets me know it isn't going anywhere." He becomes one with his weapon...don't get in the way.Jon Quote Link to comment Share on other sites More sharing options...
edgecrusher Posted November 8, 2012 Report Share Posted November 8, 2012 I'd look around, something about the 1-12 twist doesn't sit well with me on that fulton barrelhttp://www.fulton-armory.com/barrelfatitan20nmhbarss1x12936gasblock.aspx^this one? Quote Link to comment Share on other sites More sharing options...
outlaw7 Posted November 8, 2012 Author Report Share Posted November 8, 2012 I'd look around, something about the 1-12 twist doesn't sit well with me on that fulton barrelWhat twist should i be looking for? Also for a 5-600 yd shooter is a match grade barrel really necessary? Quote Link to comment Share on other sites More sharing options...
edgecrusher Posted November 8, 2012 Report Share Posted November 8, 2012 What twist should i be looking for? Also for a 5-600 yd shooter is a match grade barrel really necessary?if you are hunting with it, I WOULD get a match barrel. To stabilize heavier bullets, 1-10 or 1-11 would be best imho Quote Link to comment Share on other sites More sharing options...
outlaw7 Posted November 8, 2012 Author Report Share Posted November 8, 2012 Thank you for the input. I wont use this for hunting just target and if i ever need it for defense. Ill start looking around for a 1-10 barrel. Quote Link to comment Share on other sites More sharing options...
outlaw7 Posted November 14, 2012 Author Report Share Posted November 14, 2012 puzzle pieces Quote Link to comment Share on other sites More sharing options...
Robocop1051 Posted November 14, 2012 Report Share Posted November 14, 2012 Those look good! Did you have them dipped? or did you dye them them? Quote Link to comment Share on other sites More sharing options...
outlaw7 Posted November 14, 2012 Author Report Share Posted November 14, 2012 Those look good! Did you have them dipped? or did you dye them them?They are hydro dipped. Quote Link to comment Share on other sites More sharing options...
unforgiven Posted November 14, 2012 Report Share Posted November 14, 2012 Nice brother outlaw.Who did the hydro? Quote Link to comment Share on other sites More sharing options...
outlaw7 Posted November 17, 2012 Author Report Share Posted November 17, 2012 Nice brother outlaw.Who did the hydro?they were done at a place in oregon. I found them for sale already pre-dipped but once i got them in the colors were way off. I had a feeling they might not match but pulled the trigger on them anyway. They are en-route back to be swapped out for a fde set. Not gonna try and get a perfect match, too big of a headache. good thing i got this guy the same day or i might had been a little frustrated at the situation. Quote Link to comment Share on other sites More sharing options...
Robocop1051 Posted November 17, 2012 Report Share Posted November 17, 2012 The print is good, just muck up the color on the furniture a bit. Use some dirty grease or oil to stain it a hair darker. Then clean up the excess. They won't be perfect, but they can be damned close. Quote Link to comment Share on other sites More sharing options...
planeflyer21 Posted November 17, 2012 Report Share Posted November 17, 2012 That salmon would make my day too!Jon Quote Link to comment Share on other sites More sharing options...
unforgiven Posted November 17, 2012 Report Share Posted November 17, 2012 Nice fish brother gonna be some good eatin. <thumbsup>hydro print looks good also. 8) Quote Link to comment Share on other sites More sharing options...
branman530 Posted November 26, 2012 Report Share Posted November 26, 2012 nice build! looks like we're in it together! i just started on mine so i'm looking forward to seeing your progress. Quote Link to comment Share on other sites More sharing options...
outlaw7 Posted November 28, 2012 Author Report Share Posted November 28, 2012 Got a ubr and miad grip on the way in fde. Also got in my slash heavy buffer and spring. Should be getting the lpk and barrel ordered up after payday. Quote Link to comment Share on other sites More sharing options...
outlaw7 Posted December 1, 2012 Author Report Share Posted December 1, 2012 Stock came today, grip, lpk, should be in tomorrow. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.